I 10:44:10 ImgBurn Version 2.5.0.0 started!
I 10:44:10 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)
I 10:44:10 Total Physical Memory: 4 190 412 KB - Available: 2 972 184 KB
W 10:44:10 SPTD can have a detrimental effect on drive performance.
I 10:44:10 Initialising SPTI...
I 10:44:10 Searching for SCSI / ATAPI devices...
I 10:44:10 Found 1 DVD±RW/RAM!
I 10:51:17 Operation Started!
I 10:51:17 Source File: Desktop\Kane And Lynch Dead Men.dvd
I 10:51:17 Source File Sectors: 3 825 924 (MODE1/2048)
I 10:51:17 Source File Size: 7 835 492 352 bytes
I 10:51:17 Source File Volume Identifier: XGD2DVD_NTSC
I 10:51:17 Source File Volume Set Identifier: 34672923
I 10:51:17 Source File Implementation Identifier: Sonic Scenarist 3.1
I 10:51:17 Source File File System(s): ISO9660; UDF (1.02)
I 10:51:17 Destination Device: [1:0:0] hp DVD RW AD-7561S AH73 (E:) (SATA)
I 10:51:17 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2,4x; 4x)
I 10:51:17 Destination Media Sectors: 4 173 824
I 10:51:17 Write Mode: DVD
I 10:51:17 Write Type: DAO
I 10:51:17 Write Speed: 2,4x
I 10:51:18 Link Size: Auto
I 10:51:18 Lock Volume: Yes
I 10:51:18 Test Mode: No
I 10:51:18 OPC: No
I 10:51:18 BURN-Proof: Enabled
I 10:51:20 Optimal L0 Data Zone Capacity: 1 913 760
I 10:51:20 Optimal L0 Data Zone Method: Copied From Original Disc
I 10:51:20 Set L0 Data Zone Capacity Succeeded!
I 10:51:20 Filling Buffer... (40 MB)
I 10:51:21 Writing LeadIn...
I 10:52:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)
I 10:52:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)
I 10:52:33 Writing Layer 0... (LBA: 0 - 1913759)
I 11:12:29 Writing Layer 1... (LBA: 1913760 - 3825923)
I 11:32:23 Synchronising Cache...
I 11:32:27 Closing Track...
I 11:32:28 Finalising Disc...
I 11:33:38 Exporting Graph Data...
I 11:33:38 Graph Data File: C:\Users\Home\AppData\Roaming\ImgBurn\Graph Data Files\hp_DVD_RW_AD-7561S_AH73_19-KESÄKUUTA-2010_10-51_RICOHJPN-D01-67_2,4x.ibg
I 11:33:38 Export Successfully Completed!
I 11:33:38 Operation Successfully Completed! - Duration: 00:42:21
I 11:33:38 Average Write Rate: 3 201 KB/s (2.3x) - Maximum Write Rate: 3 346 KB/s (2.4x)
I 12:40:59 Close Request Acknowledged
I 12:37:54 ImgBurn Version 2.5.0.0 started!
I 12:37:54 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)
I 12:37:54 Total Physical Memory: 4 190 412 KB - Available: 3 039 700 KB
W 12:37:54 SPTD can have a detrimental effect on drive performance.
I 12:37:54 Initialising SPTI...
I 12:37:54 Searching for SCSI / ATAPI devices...
I 12:37:54 Found 1 DVD±RW/RAM!
I 12:38:06 Close Request Acknowledged
I 12:38:06 Closing Down...
I 12:38:06 Shutting down SPTI...
I 12:38:06 ImgBurn closed!
Are you on a modded xbox? make sure you have settings set to write and not just verify. Also it might just be a bad copy of the game. do other backups work?
That media isn't good for use with the 360. And you're saying it's flashed with lt. Is it lt or lt1.1? And did you do a full firmware dump, meaning you got your laser calibration data, or did you just do a simple key dump?
Is your burners firmware up to date? If not then update it then burn a disc at 4x.
Originally posted by bhetrick: That media isn't good for use with the 360. And you're saying it's flashed with lt. Is it lt or lt1.1? And did you do a full firmware dump, meaning you got your laser calibration data, or did you just do a simple key dump?
Is your burners firmware up to date? If not then update it then burn a disc at 4x.
LT and simple key dump I assume, I only went through the necessary stages. I dont think its my burners firmware, if it plays on a computer anyway? The game is not a new release so it should not need LT 1.1.
Could anyone describe more about the laser calibration data extraction?
