|
|
|
Bad Flash and mixed media???
|
|
|
DJScrew
Newbie
|
30. August 2010 @ 09:24 |
Link to this message
|
Hi I've got a Sammy ms28...I flashed it with Jungle flash 1.7...when I originally did it it turned off on me halfway through so I did it again and got this log.
Key found in KeyDB at record (1 - JungleFlasher v0.1.75 Beta (152))
Key is: 193EBA17362D583DE20B0C8748FBA350
Key has been tested and verified, thanks C4eva !
Drive is Samsung.. Spoofing Target
DVD Key already matches
ID strings already match
Serial data already matches
Getting Status from port 0xB800
Invalid Status 0x50
Getting Status from port 0xB800
Invalid Status 0x50
Sending Sammy_Un_Lock to Drive on port 0xB800
Stage 1, Complete!
Stage 2, Complete!
Stage 3, Complete!
Done!
Sending Vendor Intro
Requesting Device ID
Manufacturer ID: 0xBF
Device ID: 0xB6
Flash Name: SST(SST39SF020)
Flash Size: 262144 bytes
Getting Status from port 0xB800
Parallel flash found with Status 0x70
Writing target buffer to flash
Erasing Bank 0: ................
Writing Bank 0: ................
Erasing Bank 1: ................
Writing Bank 1: ................
Erasing Bank 2: ................
Writing Bank 2: ................
Erasing Bank 3: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
I see people talking bout seeing 4 banks...why am I only seeing 3 getting rewritten?After this I have used imgburn with the layer break set to 1913760 and changed the book type to DVD rom but yet I have already burnt 3 coasters that keep coming up mixed media...when i burnt I had this log
I 22:28:20 Checking Path Length...
I 22:28:20 Contents: 2 Files, 0 Folders
I 22:28:20 Content Type: Data
I 22:28:20 Data Type: MODE1/2048
I 22:28:20 File System(s): ISO9660, UDF (1.02)
I 22:28:20 Volume Label: Red [RF] [X360] [www.spatorrent.com]
I 22:28:20 Size: 7,838,695,455 bytes
I 22:28:20 Sectors: 3,827,489
I 22:28:20 Image Size: 7,839,252,480 bytes
I 22:28:20 Image Sectors: 3,827,760
I 22:28:28 Operation Successfully Completed! - Duration: 00:00:10
I 22:28:28 Operation Started!
I 22:28:28 Source File: -==/\/[BUILD IMAGE]\/\==-
I 22:28:28 Source File Sectors: 3,827,760 (MODE1/2048)
I 22:28:28 Source File Size: 7,839,252,480 bytes
I 22:28:28 Source File Volume Identifier: Red Dead Redemption [RF] [X360] [www.spatorrent.com]
I 22:28:28 Source File Application Identifier: IMGBURN V2.5.1.0 - THE ULTIMATE IMAGE BURNER!
I 22:28:28 Source File Implementation Identifier: ImgBurn
I 22:28:28 Source File File System(s): ISO9660, UDF (1.02)
I 22:28:28 Destination Device: [2:1:0] HL-DT-ST DVD-RAM GH22NP20 2.00 (E:) (ATA)
I 22:28:28 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x)
I 22:28:28 Destination Media Sectors: 4,173,824
I 22:28:28 Write Mode: DVD
I 22:28:28 Write Type: DAO
I 22:28:28 Write Speed: 2.4x
I 22:28:28 Link Size: Auto
I 22:28:28 Lock Volume: Yes
I 22:28:28 Test Mode: No
I 22:28:28 OPC: No
I 22:28:28 BURN-Proof: Enabled
W 22:28:28 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)
I 22:28:28 Book Type Setting: DVD-ROM
I 22:28:28 Optimal L0 Data Zone Capacity: 1,913,888
I 22:28:28 Optimal L0 Data Zone Method: ECC Block Boundary
I 22:28:28 Set L0 Data Zone Capacity Succeeded!
I 22:28:28 Filling Buffer... (20 MB)
I 22:28:29 Writing LeadIn...
I 22:29:05 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827759)
I 22:29:05 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827759)
I 22:29:05 Writing Layer 0... (LBA: 0 - 1913887)
I 22:41:28 Writing Layer 1... (LBA: 1913888 - 3827759)
I 22:53:24 Synchronising Cache...
I 22:53:46 Closing Track...
I 22:54:21 Finalising Disc...
I 22:54:33 Exporting Graph Data...
I 22:54:34 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH22NP20_2.00_SUNDAY-AUGUST-29-2010_10-28_PM_MKM-001-00_2.4x.ibg
I 22:54:34 Export Successfully Completed!
I 22:54:34 Operation Successfully Completed! - Duration: 00:26:05
I 22:54:34 Average Write Rate: 5,247 KB/s (3.8x) - Maximum Write Rate: 5,618 KB/s (4.1x)
I 22:54:34 Cycling Tray before Verify...
W 22:54:46 Waiting for device to become ready...
I 22:55:00 Device Ready!
I 22:55:02 Operation Started!
I 22:55:02 Source Device: [2:1:0] HL-DT-ST DVD-RAM GH22NP20 2.00 (E:) (ATA)
I 22:55:02 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 4x)
I 22:55:02 Image File: -==/\/[BUILD IMAGE]\/\==-
I 22:55:02 Image File Sectors: 3,827,760 (MODE1/2048)
I 22:55:02 Image File Size: 7,839,252,480 bytes
I 22:55:02 Image File Volume Identifier: Red [RF] [X360] [www.spatorrent.com]
I 22:55:02 Image File Application Identifier: IMGBURN V2.5.1.0 - THE ULTIMATE IMAGE BURNER!
I 22:55:02 Image File Implementation Identifier: ImgBurn
I 22:55:02 Image File File System(s): ISO9660, UDF (1.02)
I 22:55:02 Read Speed (Data/Audio): MAX / MAX
I 22:55:02 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827759)
I 22:55:02 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827759)
I 22:55:02 Verifying Layer 0... (LBA: 0 - 1913887)
I 23:00:44 Verifying Layer 1... (LBA: 1913888 - 3827759)
I 23:07:14 Exporting Graph Data...
I 23:07:14 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH22NP20_2.00_SUNDAY-AUGUST-29-2010_10-28_PM_MKM-001-00_2.4x.ibg
I 23:07:14 Export Successfully Completed!
I 23:07:14 Operation Successfully Completed! - Duration: 00:12:11
I 23:07:14 Average Verify Rate: 10,472 KB/s (7.6x) - Maximum Verify Rate: 17,819 KB/s (12.9x)
Someone pleeeeease help me and point me in the right direction...these discs are expensive (Verbatim's) and I would really love to play some games sometime this week :(Thank you to everyone who responds as I am becoming frustrated quickly
|
|
Advertisement
|
 |
|
|
|
dagdaniel
Member
|
30. August 2010 @ 09:53 |
Link to this message
|
|
i am not sure of the problem, having read over the log, however there ARE indeed 4 banks being rewritten (0,1,2,3) if it were to go to "4" that would be the fifth bank. So in that sense, it looks ok to me
|
AfterDawn Addict
2 product reviews
|
30. August 2010 @ 10:02 |
Link to this message
|
Nevermind, I see you said you are using Verbatim.
You don't need to change the booktype. Make sure you are running your ISOs through ABGX and then when you go to burn with IMGBurn, just select the .dvd file.
This message has been edited since posting. Last time this message was edited on 30. August 2010 @ 10:04
|
|
DJScrew
Newbie
|
30. August 2010 @ 10:21 |
Link to this message
|
Yes very true about the 4...Duh...I need coffee..lol
So if I just select the dvd file it should work?I don't have to put both files on the disk?
Also I have a few backup's that aren't .iso or .dvd they are actually saying .000 as an extension...any ideas of what to do with these?
This message has been edited since posting. Last time this message was edited on 30. August 2010 @ 10:24
|
AfterDawn Addict
2 product reviews
|
30. August 2010 @ 10:35 |
Link to this message
|
Originally posted by DJScrew:
Yes very true about the 4...Duh...I need coffee..lol
So if I just select the dvd file it should work?I don't have to put both files on the disk?
Also I have a few backup's that aren't .iso or .dvd they are actually saying .000 as an extension...any ideas of what to do with these?
Again, make sure you are running the ISO through ABGX. Don't change the booktype, leave it the way it is. Make sure you have the .ISO and the .dvd files in the same folder. Load up IMGBurn and select the .dvd. This will setup the layerbreak for you.
Rename the .000 to .ISO and then run through ABGX.
|
|
DJScrew
Newbie
|
30. August 2010 @ 11:25 |
Link to this message
|
Originally posted by leerage:
Originally posted by DJScrew:
Yes very true about the 4...Duh...I need coffee..lol
So if I just select the dvd file it should work?I don't have to put both files on the disk?
Also I have a few backup's that aren't .iso or .dvd they are actually saying .000 as an extension...any ideas of what to do with these?
Again, make sure you are running the ISO through ABGX. Don't change the booktype, leave it the way it is. Make sure you have the .ISO and the .dvd files in the same folder. Load up IMGBurn and select the .dvd. This will setup the layerbreak for you.
Rename the .000 to .ISO and then run through ABGX.
Okay so I put both files in a folder and opened up imgburn...do I burn both the .iso and the .dvd to the disc?I clicked the .dvr and it did nothing...I'm bout to try to burn 1 more before I put my head on the desk and start crying...
|
|
Advertisement
|
|
|
|
DJScrew
Newbie
|
30. August 2010 @ 17:12 |
Link to this message
|
|
Kay I solved it....I was in build mode instead of write...jeez i'm stupid...thank you for your help :)
|
|
