Not sure what to do here. I carried out a ylod repair to a fat 60gb and when i tried to test it after putting it all back together i am not getting a red stand by light. It seems completely dead. No bleeps no ylod indications, nothing.
I swapped the power pack with a known working unit and still nothing.
Does anyone know why this is. I have carried out numerous ylod repairs and I have never came across this, so I don't think it was anything to do with my repair process, however I could be wrong.
Any help with this would be greatly appreciated as it is not my console and I would dearly like to repair it.
Originally posted by fairboz: Not sure what to do here. I carried out a ylod repair to a fat 60gb and when i tried to test it after putting it all back together i am not getting a red stand by light. It seems completely dead. No bleeps no ylod indications, nothing.
I swapped the power pack with a known working unit and still nothing.
Does anyone know why this is. I have carried out numerous ylod repairs and I have never came across this, so I don't think it was anything to do with my repair process, however I could be wrong.
Any help with this would be greatly appreciated as it is not my console and I would dearly like to repair it.
Thanks
hi, i have a 60gb ps3 and i also had the ylod, so i did the reflow once then the second time i did it i put it all back together and had no lights or anything. but what i did notice was that there was still a surge of power going through the power suply. so i looked and asked on the net and found out that it was the on/off button, so what o did was take the small wirestrip out of the board and turned it around and put it back in and it worked. you will need a new one in time as there get worn down, hope this is what it is for you and hope it works
