|
|
|
Premodded XBOX 360 will not play the games i burn
|
|
|
sk68
Newbie
|
14. October 2010 @ 09:11 |
Link to this message
|
Hello All,
This is for my son for whom I got a premodded xbox 360 (PAL). The console plays the copies I got from the store. Some of the copies are on MELODY media, which is basically supposed to be of inferior quality.
I have googled all over on how to burn xbox 360 backups. I have done everything using imgburn, and got successful burns. Initially I used Imation DVD+R DL (DISC ID: RITEK). The two times I tried, I got no errors, but both times, the game did not play beyond the intro video.
Basically I want you to know that I have done the layerbreak, set the booktype, burnt at 2.4x???
Then I bought a couple of TDKs (made in india) but still no luck.
I searched for VERBATIM but the only ones I could find were made in India (which i felt would be the same as TDK basically) so i did not buy those.
I have a LITE-ON SOHW 1673s which i have flashed to 1693s, after going through a lot of forums.
Any help would be appreciated.
|
|
Advertisement
|
|
|
|
|
coorva
Suspended due to non-functional email address
|
14. October 2010 @ 09:46 |
Link to this message
|
|
try and burn them at 4x speed,,if i burn at 2.4x,,the games dont work,,what kind of burner to you have??
microsoft after a ban wave |
|
coorva
Suspended due to non-functional email address
|
14. October 2010 @ 09:46 |
Link to this message
|
|
also what OS are you using
,,XP seems to be the best for this kinds stuff,,
microsoft after a ban wave
This message has been edited since posting. Last time this message was edited on 14. October 2010 @ 09:49
|
|
sk68
Newbie
|
14. October 2010 @ 10:00 |
Link to this message
|
Originally posted by coorva:
try and burn them at 4x speed,,if i burn at 2.4x,,the games dont work,,what kind of burner to you have??
Thanks for your prompt reply coorva.
I have a liteon sohw 1673s which for which I have upgraded the firmware so that it shows me that i have a liteon sohw 1693s.
The media I was using was 8x and I tried to set the write speed on imgburn to 4x (for both the media as well as the drive), but when it starts writing, it gives a write speed mismatch error and then it defaults to 2.4x??
I am pretty certain the drive should support writing at 4x for dvd+r DL?
Thanks in advance...
|
|
coorva
Suspended due to non-functional email address
|
14. October 2010 @ 10:11 |
Link to this message
|
yea i have an LG burner,,and it will not read any games if i burn it 2.4x,,only 4x,
microsoft after a ban wave
|
|
sk68
Newbie
|
14. October 2010 @ 11:24 |
Link to this message
|
Originally posted by coorva:
also what OS are you using
,,XP seems to be the best for this kinds stuff,,
Yes, I am using XP SP3.
The problem seems to be the 'write speed mismatch'.. dunno why imgburn is unable to write at 4x?
Here is the imgburn log from one of my 'successful' writing attempts:
//****************************************\\
; ImgBurn Version 2.5.2.0 - Log
; Thursday, 07 October 2010, 18:49:16
; \\****************************************//
;
;
I 18:02:14 ImgBurn Version 2.5.2.0 started!
I 18:02:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 18:02:14 Total Physical Memory: 1,047,788 KB - Available: 395,728 KB
I 18:02:14 Initialising SPTI...
I 18:02:14 Searching for SCSI / ATAPI devices...
I 18:02:15 -> Drive 1 - Info: LITE-ON DVDRW SOHW-1673S JS0C (G:) (ATA)
I 18:02:15 -> Drive 2 - Info: SCSI DVD-ROM 1.0 (H:) (SCSI)
I 18:02:15 Found 1 DVD-ROM and 1 DVD±RW!
I 18:08:15 Operation Started!
I 18:08:15 Source File: F:\torrents\FiFA 11 [PAL][Xbox360][Spanish][www.consolasatope.com]\FiFA 11 [PAL][Xbox360][Spanish][www.consolasatope.com].dvd
I 18:08:15 Source File Sectors: 3,827,488 (MODE1/2048)
I 18:08:16 Source File Size: 7,838,695,424 bytes
I 18:08:16 Source File Volume Identifier: DVD_ROM
I 18:08:16 Source File Volume Set Identifier: ec67c000MS UDFBridge
I 18:08:16 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 18:08:16 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 18:08:16 Source File File System(s): ISO9660, UDF (1.50)
I 18:08:16 Destination Device: [2:0:0] LITE-ON DVDRW SOHW-1673S JS0C (G:) (ATA)
I 18:08:16 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x)
I 18:08:16 Destination Media Sectors: 4,173,824
I 18:08:16 Write Mode: DVD
I 18:08:16 Write Type: DAO
I 18:08:16 Write Speed: 4x
I 18:08:16 Link Size: Auto
I 18:08:16 Lock Volume: Yes
I 18:08:16 Test Mode: No
I 18:08:16 OPC: No
I 18:08:16 BURN-Proof: Enabled
W 18:08:16 Write Speed Miscompare! - Wanted: 5,540 KB/s (4x), Got: 3,324 KB/s (2.4x)
I 18:08:16 Book Type Setting: DVD-ROM
I 18:08:16 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes
I 18:08:16 User Specified L0 Data Zone Capacity: 1,913,760
I 18:09:04 Set L0 Data Zone Capacity Succeeded!
I 18:09:04 Filling Buffer... (40 MB)
I 18:09:05 Writing LeadIn...
I 18:09:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 18:09:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 18:09:07 Writing Layer 0... (LBA: 0 - 1913759)
I 18:28:28 Writing Layer 1... (LBA: 1913760 - 3827487)
I 18:47:51 Synchronising Cache...
I 18:47:52 Closing Track...
I 18:47:59 Finalising Disc...
I 18:48:56 Exporting Graph Data...
I 18:48:57 Graph Data File: C:\Documents and Settings\user\Application Data\ImgBurn\Graph Data Files\LITE-ON_DVDRW_SOHW-1673S_JS0C_THURSDAY-OCTOBER-07-2010_6-08_PM_MBIPG101-R10-65_4x.ibg
I 18:48:57 Export Successfully Completed!
I 18:48:57 Operation Successfully Completed! - Duration: 00:40:40
I 18:48:57 Average Write Rate: 3,293 KB/s (2.4x) - Maximum Write Rate: 3,413 KB/s (2.5x)
I 18:49:16 Close Request Acknowledged
I 18:49:16 Closing Down...
I 18:49:16 Shutting down SPTI...
I 18:49:16 ImgBurn closed!
This message has been edited since posting. Last time this message was edited on 14. October 2010 @ 11:40
|
|
Advertisement
|
|
|
|
sk68
Newbie
|
14. October 2010 @ 11:49 |
Link to this message
|
Originally posted by coorva:
yea i have an LG burner,,and it will not read any games if i burn it 2.4x,,only 4x,
What kind of media are you using?
|
|
