my xbox i was just gonna jtag has now decided to stop working alltogehter after a xclamp fix, i just got the stuff ready to jtag and it goes :( whats the best fix for this? i have no picture or anything it just boots to black screen and 3 red lights?
A reflow is the best fix. Either pay someone with a reflow station to do it or do it yourself with a heatgun. Pennies, towels, overheating nor x-clamp alone repair the broken solder causing the red ring
Originally posted by w00ly: A reflow is the best fix. Either pay someone with a reflow station to do it or do it yourself with a heatgun. Pennies, towels, overheating nor x-clamp alone repair the broken solder causing the red ring
i tried to heatgun the xbox and when it cooled i got 3 red lights then error,
E03: possibly Power problem could be the PSU could be the GPU/CPU, somehow the console isn't getting clean power from the power supply.
looked at the gpu and realised there was 2 little chip things missing, so i took 2 off my old xbox and soldered them onto this box, only to get 3 red lights
E10: Unconfirmed: CPU error, generally caused by a poor connection to the mainboard (cold solder joints/bridged solder joints). This can also be triggered by an error with the TSOP, heatgunned again and still the same, i just chicked it in the bin, its doin my head in now lol just gutted as it was JTAGABLE :(
