|
Fable 3 black screen on LT+ firmware
|
|
|
dorian614
Junior Member
|
25. November 2010 @ 15:30 |
Link to this message
|
Hey everyone, if this has been answered, I apologize, I searched and couldn't find anything on it. I found info on JTAG'ed consoles, but not regular ones.
I have a 360 with a Liteon that has the new LT+ firmware on it, with a Kinect dashboard.
Fable 3 no longer gives me the "disc unreadable" error when I put it in, but now it begins to boot, goes to a black screen... and that's it.
Does anyone know what the problem could be?
|
|
Advertisement
|
|
|
|
|
Thosmos
Member
|
25. November 2010 @ 17:10 |
Link to this message
|
Originally posted by dorian614:
Hey everyone, if this has been answered, I apologize, I searched and couldn't find anything on it. I found info on JTAG'ed consoles, but not regular ones.
I have a 360 with a Liteon that has the new LT+ firmware on it, with a Kinect dashboard.
Fable 3 no longer gives me the "disc unreadable" error when I put it in, but now it begins to boot, goes to a black screen... and that's it.
Does anyone know what the problem could be?
After the new flash, will the liteon play your older back ups? If so, I would say, a bad burn??
Lite-On 74850, Ben-Q 64930, Hitachi 47DJ, Samsung MS28.
|
|
Thosmos
Member
|
25. November 2010 @ 17:12 |
Link to this message
|
Originally posted by Thosmos:
Originally posted by dorian614:
Hey everyone, if this has been answered, I apologize, I searched and couldn't find anything on it. I found info on JTAG'ed consoles, but not regular ones.
I have a 360 with a Liteon that has the new LT+ firmware on it, with a Kinect dashboard.
Fable 3 no longer gives me the "disc unreadable" error when I put it in, but now it begins to boot, goes to a black screen... and that's it.
Does anyone know what the problem could be?
After the new flash, will the liteon play your older back ups? If so, I would say, a bad burn??
Do you have any other AP25 titles that you could test? NFS:HP or AC:B?
Lite-On 74850, Ben-Q 64930, Hitachi 47DJ, Samsung MS28.
|
|
dorian614
Junior Member
|
25. November 2010 @ 17:13 |
Link to this message
|
Originally posted by Thosmos:
Originally posted by dorian614:
Hey everyone, if this has been answered, I apologize, I searched and couldn't find anything on it. I found info on JTAG'ed consoles, but not regular ones.
I have a 360 with a Liteon that has the new LT+ firmware on it, with a Kinect dashboard.
Fable 3 no longer gives me the "disc unreadable" error when I put it in, but now it begins to boot, goes to a black screen... and that's it.
Does anyone know what the problem could be?
After the new flash, will the liteon play your older back ups? If so, I would say, a bad burn??
Originally posted by Thosmos:
Originally posted by dorian614:
Hey everyone, if this has been answered, I apologize, I searched and couldn't find anything on it. I found info on JTAG'ed consoles, but not regular ones.
I have a 360 with a Liteon that has the new LT+ firmware on it, with a Kinect dashboard.
Fable 3 no longer gives me the "disc unreadable" error when I put it in, but now it begins to boot, goes to a black screen... and that's it.
Does anyone know what the problem could be?
After the new flash, will the liteon play your older back ups? If so, I would say, a bad burn??
yes it does play the other backups, I was hoping that wasn't it as I am out of disks, gonna have to fight the black friday crowd in hopes of finding one.
|
|
dorian614
Junior Member
|
25. November 2010 @ 17:14 |
Link to this message
|
Originally posted by Thosmos:
Originally posted by Thosmos:
Originally posted by dorian614:
Hey everyone, if this has been answered, I apologize, I searched and couldn't find anything on it. I found info on JTAG'ed consoles, but not regular ones.
I have a 360 with a Liteon that has the new LT+ firmware on it, with a Kinect dashboard.
Fable 3 no longer gives me the "disc unreadable" error when I put it in, but now it begins to boot, goes to a black screen... and that's it.
Does anyone know what the problem could be?
After the new flash, will the liteon play your older back ups? If so, I would say, a bad burn??
Do you have any other AP25 titles that you could test? NFS:HP or AC:B?
I have AC:B but it's not on a DVD yet.. sigh, going to have to go buy some disks.
|
Senior Member
|
25. November 2010 @ 17:19 |
Link to this message
|
Has your Fable 3 been patched with the anti-AP2.5 patches released a day or two ago? If not, that could be why.
|
|
jpizzle
Senior Member
|
25. November 2010 @ 17:20 |
Link to this message
|
you are running the ISO through ABGX 1.0.4 before burning right ?
|
|
dorian614
Junior Member
|
25. November 2010 @ 17:21 |
Link to this message
|
Originally posted by funksoulb:
Has your Fable 3 been patched with the anti-AP2.5 patches released a day or two ago? If not, that could be why.
definitely not. I'm sure there's threads that detail this, but the anti AP 2.5 patches you speak of... this is the first I've heard of them.. Can you point me in the right direction?
|
|
dorian614
Junior Member
|
25. November 2010 @ 17:22 |
Link to this message
|
Originally posted by jpizzle:
you are running the ISO through ABGX 1.0.4 before burning right ?
No, I have had the disc I tried for a while and all I did was use the 360 waves patcher on it to make it wave 3... Obviously I am missing steps, can someone point me the right way? I apologize for my ignorance.
|
|
jpizzle
Senior Member
|
25. November 2010 @ 17:23 |
Link to this message
|
run your backup ISO through ABGX and then burn
download new ABGX HERE
This message has been edited since posting. Last time this message was edited on 25. November 2010 @ 17:24
|
Senior Member
|
25. November 2010 @ 17:23 |
Link to this message
|
Originally posted by dorian614:
Originally posted by jpizzle:
you are running the ISO through ABGX 1.0.4 before burning right ?
No, I have had the disc I tried for a while and all I did was use the 360 waves patcher on it to make it wave 3... Obviously I am missing steps, can someone point me the right way? I apologize for my ignorance.
Rip the disc to an ISO with ImgBurn in read mode. Run that ISO through abgx360 1.0.4 which will patch it and create a .DVD file ready to burn it, then burn it and you should be good to go. The only other games affected at the moment are AC: Brotherhood and NFS Hot Pursuit, but patches for those are available via abgx360 too.
Click HERE for up to date 360 tutorials that may help you! This message has been edited since posting. Last time this message was edited on 25. November 2010 @ 17:25
|
|
dorian614
Junior Member
|
25. November 2010 @ 17:26 |
Link to this message
|
Originally posted by funksoulb:
Originally posted by dorian614:
Originally posted by jpizzle:
you are running the ISO through ABGX 1.0.4 before burning right ?
No, I have had the disc I tried for a while and all I did was use the 360 waves patcher on it to make it wave 3... Obviously I am missing steps, can someone point me the right way? I apologize for my ignorance.
Rip the disc to an ISO with ImgBurn in read mode. Run that ISO through abgx360 1.0.4 which will patch it and create a .DVD file ready to burn it, then burn it and you should be good to go. The only other games affected at the moment are AC: Brotherhood and NFS Hot Pursuit, but patches for those are available via abgx360 too.
awesome. Thank you. are there any specific settings I have to use or do I just load it up and go from there?
|
Senior Member
|
25. November 2010 @ 17:36 |
Link to this message
|
Originally posted by dorian614:
are there any specific settings I have to use or do I just load it up and go from there?
These are the items I have checked: -
Options tab: -
Check/Create .dvd file
Check Stealth
Verify if Stealth passes
Use colors
Check for AnyDVD style game data corruption
Check for updates + Include the CSV
Check Game Partition CRC when needed
Autofix tab: -
Autofix Threshold - Set to level 3 (You don't necessarily want to use this setting if you're ripping your own games though)
All other boxes checked on that tab
Misc tab: -
Your console's region code (You don't need to set this, but you can if you like)
SplitVid - Add it if it doesn't exist or isn't valid
Once you've got the settings set up how you like, go to File - Save Settings... and hit OK, then it'll remember the settings in future.
Click HERE for up to date 360 tutorials that may help you! This message has been edited since posting. Last time this message was edited on 25. November 2010 @ 17:38
|
|
dorian614
Junior Member
|
25. November 2010 @ 17:43 |
Link to this message
|
Originally posted by funksoulb:
Originally posted by dorian614:
are there any specific settings I have to use or do I just load it up and go from there?
These are the items I have checked: -
Options tab: -
Check/Create .dvd file
Check Stealth
Verify if Stealth passes
Use colors
Check for AnyDVD style game data corruption
Check for updates + Include the CSV
Check Game Partition CRC when needed
Autofix tab: -
Autofix Threshold - Set to level 3 (You don't necessarily want to use this setting if you're ripping your own games though)
All other boxes checked on that tab
Misc tab: -
Your console's region code (You don't need to set this, but you can if you like)
SplitVid - Add it if it doesn't exist or isn't valid
Once you've got the settings set up how you like, go to File - Save Settings... and hit OK, then it'll remember the settings in future.
Thank you all so much, you've been really helpful and I will do everything this says.. Now I just need some darn discs :-)
|
|
Thosmos
Member
|
25. November 2010 @ 17:57 |
Link to this message
|
Originally posted by dorian614:
Originally posted by funksoulb:
Has your Fable 3 been patched with the anti-AP2.5 patches released a day or two ago? If not, that could be why.
definitely not. I'm sure there's threads that detail this, but the anti AP 2.5 patches you speak of... this is the first I've heard of them.. Can you point me in the right direction?
With LT+ -- you just run though ABGX 104.
Lite-On 74850, Ben-Q 64930, Hitachi 47DJ, Samsung MS28.
This message has been edited since posting. Last time this message was edited on 25. November 2010 @ 18:01
|
|
tozadog
Junior Member
|
26. November 2010 @ 04:41 |
Link to this message
|
Just to add i too had the same blank screen problem as above and followed the guide ran the iso thru ABGX with the settings listed above did a reburn and now works perfect!
Thanks guys!
|
|
Thosmos
Member
|
26. November 2010 @ 19:08 |
Link to this message
|
Originally posted by tozadog:
Just to add i too had the same blank screen problem as above and followed the guide ran the iso thru ABGX with the settings listed above did a reburn and now works perfect!
Thanks guys!
Now I've run into the same issue, using the ABGX settings that I did with the earlier version of ABGX, and then transfering the settings to my new 103 -- the AP25 titles play fine on my Hitachi 47 -- but my first flash with a BenQ to LT+ using the same disk that played in the Hitachi got a black screen (and locked the machine from everything -- had to power off). Saw the title in the dash -- which had been updated to Kinect... All other titles played. Sims 3 included. just not AC:B or NFS:HP. Need to go back and check my settings in ABGX now as well!! ;)
Lite-On 74850, Ben-Q 64930, Hitachi 47DJ, Samsung MS28.
|
|
Thosmos
Member
|
26. November 2010 @ 21:57 |
Link to this message
|
Originally posted by tozadog:
Just to add i too had the same blank screen problem as above and followed the guide ran the iso thru ABGX with the settings listed above did a reburn and now works perfect!
Thanks guys!
I set everyting in 104 to match the above, and reburned. The only difference was that I had to uncheck video padding in Options. Could that have caused it? I'll try the new burn on Monday on the Benq LT+ and let you know how it went.
Lite-On 74850, Ben-Q 64930, Hitachi 47DJ, Samsung MS28.
|
|
Thosmos
Member
|
26. November 2010 @ 22:42 |
Link to this message
|
Originally posted by tozadog:
Just to add i too had the same blank screen problem as above and followed the guide ran the iso thru ABGX with the settings listed above did a reburn and now works perfect!
Thanks guys!
Loading with 104 now, with padding unchecked, it does give me the error that the AP25 replay sector is blank, and downloads a repair. I think this is the file that it needs for the BenQ with LT+.
Lite-On 74850, Ben-Q 64930, Hitachi 47DJ, Samsung MS28.
This message has been edited since posting. Last time this message was edited on 26. November 2010 @ 22:42
|
|
lepine
Suspended due to non-functional email address
|
21. January 2011 @ 11:48 |
Link to this message
|
Originally posted by Thosmos:
Originally posted by tozadog:
Just to add i too had the same blank screen problem as above and followed the guide ran the iso thru ABGX with the settings listed above did a reburn and now works perfect!
Thanks guys!
Loading with 104 now, with padding unchecked, it does give me the error that the AP25 replay sector is blank, and downloads a repair. I think this is the file that it needs for the BenQ with LT+.
heyy i just got my xbox moded made 3 games all worked 100 persent my 360 was 2009 so i think its the benQ not sure but my xbox goes black screen and locks up as well made 2 copys wasted 2 disks :( is all you did is uncheck padding for it to fix the problem?? please email me at lepine_infinity@hotmail.com thanks :)
|
|
Advertisement
|
|
|
|
Tommy12Hips
Newbie
|
17. March 2011 @ 03:48 |
Link to this message
|
I had this same problem and ended up wasting 3 discs until finally finding the solution on my 4th disc
Basically it was because of the AP25 thing but I didn't have a clue what this meant or did. Although, I did notice you guys were using abgx version 104 when mine was only 102. So I updated to 105 and when I ran it on the iso it started doing AP25 checks (which it doesn't on 102, im not sure which version it comes in) and then when I burnt it everything worked perfectly.
Just update to the latest version if my problem sounds familiar, download from www.abgx360.net
|
