I have a lite on drive and a spare benq drive which is flashed, the lite on isn't flashed, and i have heard that lite on drives are hard to flash since it needs soldering and i suck at soldering, so i want to use benq drive.
Now obviously i need to spoof benq, so to do that i need the lite on drive's key and i don't know how to do that. I have read the jungleflasher manual and i don't understand it well. If you look at my other posts, you see i already killed my benq drive because i wasn't sure what i was doing. So i don't want to repeat the same mistake again.
Can anyobdy help me on how to extract lite on drive's key and spoof it to benq drive. My benq drive is flashed with the latest lite touch firmware. So once i extract the key from lite on and spoof it to benq, will i need to flash benq again?
you can't spoof with the latest firmware... Everyone is going to tell you what the Jungle Flasher guide will tell you about soldering and cutting, or you can use a probe since it's not update, so no soldering and cutting will be required and once you have your key you won't need to cut and solder, if you check You Tube there are many tutorials.If you haven't soldered before I'd suggest you get someone to do it and dump the keys and give it to you.
Also the latest Lite Touch firmware is LT+, the drive will have to be flashed again with the Lite On key but the spoofing will be detected and you will be banned. Also the Lite touch firmware does not support spoofing. So if you get the key from the lite on stick with the Lite On drive.