|
Post Your Bad Media Experiences Here
|
|
Staff Member
2 product reviews
|
9. October 2004 @ 05:07 |
Link to this message
|
If you bought media and had problems with it, post information about the media and the merchant you got it from here. Make sure to mention if the media was what it was advertised to be based on the media code (see this thread for instructions on verifying the media code: http://forums.afterdawn.com/thread_view.cfm/6348), if the media was damaged when you got it, if it was poorly packed or appeared to have been damaged during shipping, and any other relevant details. Don't post questions in this thread.
Try to make it look something like this (not a real complaint):
Media: Ridata G04 Spindle of 50
Merchant: AMadeUpStore.com
Media Code: RITEKG04
Half the media had visible scratches on it. Out of the first 5 discs, 3 produced coasters so I called AMadeUpStore and they replaced the spindle. I got the replacement in 5 days. This is the 3rd spindle of Ridatas I've bought from them, and it was the first time I've gotten bad media.
This message has been edited since posting. Last time this message was edited on 9. October 2004 @ 05:13
|
|
Advertisement
|
|
|
|
|
qetuo
Junior Member
|
9. October 2004 @ 08:04 |
Link to this message
|
|
I ve got the Bulkpaq Orange DVD-R 8X. This is crap. They only write at 4X, (all times I tried at 6X or 8X it gotlots of coasters), and even at 4X they sometimes fail to write.
Media: Bulkpaq Orange DVD-R 8X (25 Cakebox)
Merchant: www.svp.co.uk
Media Code: TYGO2 (I think fake)
|
|
madmax69
Junior Member
|
9. October 2004 @ 22:19 |
Link to this message
|
|
Media: Ridata G04
Merchant: meritline.com
Media Code: G05
Ordered 50 pack of non branded shiny silver DVD-R 4x and received media code G05. 8 burns..8 coasters. Excees glue and horrible edges. Never had this problem with branded G04's. Almost impossible to contact customer service..was issued an RMA number and will return the discs for refund. Will notify you guys how long it takes to get my credit .
Media:Prodisc White printable DVD-R 4x
Merchant:rima.com
Media Code:S04
50% success rate on about 10 burns. Previous MCC media code had a 95% succes rate. Have contacted rima and they will issue refund and have also offered to provide me with samples of other discs if I desire to make sure they are ok..Lets see how that works out...I have yet to return the discs.
|
|
svpcomm
Newbie
|
10. October 2004 @ 11:51 |
Link to this message
|
|
Hi
Just to respond to this post:
-----------
I've got the Bulkpaq Orange DVD-R 8X. This is crap. They only write at 4X, (all times I tried at 6X or 8X it gotlots of coasters), and even at 4X they sometimes fail to write.
Media: Bulkpaq Orange DVD-R 8X (25 Cakebox)
Merchant: www.svp.co.uk
Media Code: TYGO2 (I think fake)
------------
We do not and never have sold any fake TY code DVDR.
We have sold 2 versions of the 8x Bulkpaq DVD-R.
1) Prodisc S04. This was described on the website as 8x in NEC 2500/2510/3500 only. 4x in other 8x drives. (It's a firmware issue).
2) Fujicode . Still in stock and actually a good value disc.
Hope you don't mind me clarifying this.
In our business reputation is everything and I don't agree with selling discs with a fake TY code. It degrades the reputation of genuine TY media.
Steve
Director
SVP Communications
This message has been edited since posting. Last time this message was edited on 10. October 2004 @ 11:52
|
|
pieman
Senior Member
2 product reviews
|
10. October 2004 @ 13:11 |
Link to this message
|
|
media: Datawrite 8x full face printable
merchant:disccity.co.uk
media code: Taiyo yuden tygo2 (fake)
And the buggers are still selling it!I bought mine end of august and have told them.Luckily i only had 25 (all coasters...bit like princo really) so it wasnt worth posting them back.Was offered a credit onmy next order (yeah right).
By the way steve,those tys youre selling are the dogs nuts.Real impressed.After using them no way am i going back to Ritek.Price has no relevance when it comes to quality.Thanks for providing a great store
pork pie,fish pie,cherry pie,hairy pie.Ill eat em all
|
|
rick5446
Suspended due to non-functional email address
|
11. October 2004 @ 04:56 |
Link to this message
|
Anybody else had this problem with their DVD writer!!!
I bought ProDisc DVD-R,from Supermediastore.com
Previous orders were media
ID ProdiscSO3,Manufacturer-Prodisc Tech Inc.They burned perfect at 4x,all 50 per spindle
The last order I placed was media ID MCC 02RG20,Mitsubishi,By Mitsubishi Chemical corp.
These Disc only burn at 2x for me & the last Disc on every spindle of 50 is Blemished.(Inferior Packing)
I'm USEING-NEC DVD_RW ND 1300A-burner,& Nero 6.0
This is not a complaint!Just a heads up!I've already notified Supermediastore.com,of this.They were super nice,they offered to replace the Disc w/originals.But I deemed not to,because of return shipping.If anybody else is haveing problems Please make sure you Notify your supplier & request the original ProDiscSO3.I know this is not a media problem,(except for the last Disc being Blemished).This is Firmware's,in need of being updated.Which for me at this present time is unavalible.
But I honestly feel that suppliers should be notified of these type of changes.So as to pass on to us (the consumer)these changes in media ID prior to ordering.So we can decide which one to purchase,prior to ordering
|
|
brasscap
Suspended due to non-functional email address
|
15. October 2004 @ 17:51 |
Link to this message
|
I've had a problem like rick5446 with DVD-Rs from Supermedia. I bought a stack of 50 Riteks and the first twenty tries got me ten coasters. Here's the info:
--------------------------------------------------------------------------
Unique Disc Identifier : [DVD-R:RITEKG04]
--------------------------------------------------------------------------
Disc Type : [DVD-R]
Manufacturer ID : [RITEKG04]
Manufacturer Name : [Ritek Co.]
Disc Application Code : [Unrestricted Use : Consumer Purpose]
Recording Speeds : [1x , 2x , 4x] (8x Cannot Be Detected)
Blank Disc Capacity : [2,298,496 Sectors = 4,489.3MB = 4.38GB (4.71GB)]
--------------------------------------------------------------------------
[DVD Identifier - http://DVD.Identifier.CDfreaks.com]
--------------------------------------------------------------------------
The price was right:
50 Pack Ritek Ridata G04 DVD01X0058-050F 26.00
4X DVD-R Matte Finish in cake box
Free Ground Shipping
I'm burning with a LITE-ON LDW-411S with the latest firmware upgrade, and I've had no more than the usual problems with LEADDATA01, OPTODISCR004, and BeAll G40001. I'm running WinXP SP2 with an Athlon 1333 and 512MB of memory.
Supermedia claims to be a direct Ritek distributor, and I'd heard so much praise for Ritek that I thought I'd try them, especially at the price, and as I'm in Texas, there was no sales tax as Supermedia is in California. But I remember in reading this formum some time back that our buddies in the UK were having problems with bogus media. Maybe it's not bogus crap! Just crap.
While I'm posting this, the only thing I've changed before trying this media was to install ASPI. I think I'll try disabling ASPI and see if anything changes.
Thanks for "listening."
"You can always tell quality snake oil. It comes with a brass cap." Mark Twain.
|
|
slider78
Newbie
|
18. October 2004 @ 22:51 |
Link to this message
|
|
Media:TDK 2x/4x DVD-R Silver Face
Merchant:Costco
About 150 backups and counting, haven't thrown one out yet. A little pricy at 1.59CDN and a little slow on the burn side.
|
|
brasscap
Suspended due to non-functional email address
|
19. October 2004 @ 04:49 |
Link to this message
|
|
I have to update the RITEK problem. It wasn't the blanks, it was ASPI. Don't know why, but when I took the ASPI files off my computer, DVD-Decrypter started working just fine, and I haven't had a coaster since.
|
|
blktalon
Newbie
|
19. October 2004 @ 15:21 |
Link to this message
|
|
Media: TDK 25 pack DVD-R 4x
Retailer: Costco Hawaii
Media Code: TTG01
Burner: Lite-On SOHW-1213s
Purchased 2 spindles, both had the same media code. 2 bad media out of 30 discs tested which wasn't good but not too bad. Media looks physically good, no excess dye or uneven dye spread, rounded polished edges. Discs play generally well, a few skips/pauses on standalone Toshiba and Sony DVD players. Problem occurs when I want to copy the burned discs. I have used DVD-Decryptor and Clone and both programs stop citing read errors at different parts of the disc. Decryptor will skip first read error but will find others further in the track. I have gone through 10 of my burns on TDK's and all have read errors at varying parts. It is the media as the Taiyo's and Mitsui's burn/play/read fine.
|
|
rick5446
Suspended due to non-functional email address
|
21. October 2004 @ 05:28 |
Link to this message
|
|
Another problem I found with these new Prodisc-
(Mitsubishi MCC 02RG20).When useing DVDShrink if u use the max allowable 4.35 Gig the last 200Meg are corrupt.So it is best to use custom setting & reduce the max by a couple of hundred megs.The Disc looks good,but I wonder if it is a dye or glue problem?I sure hope these Disc hold up down the line a way.
I sure liked the originals I got (ProdiscS03),They're good writing surface,& u could print on them all the way to the hub.You did'nt have to miss anything when printing.
Any body else having these kind of problems with this Disc?
|
|
64026402
Senior Member
|
31. October 2004 @ 07:26 |
Link to this message
|
|
The MCC media from prodisc are 8x media. The 1300s don't support the new media without a firmware upgrade. I have 2 1300s. They work fine with MCC at 4x now. They always burned perfectly in my 2500 NECs.
Donald
|
|
rick5446
Suspended due to non-functional email address
|
31. October 2004 @ 19:50 |
Link to this message
|
|
Hey their 64026402 where'd u get the firmware update? I can't seem to find any for the 1300a
Also they were sent 2 me labeled as 4x not 8x
|
|
64026402
Senior Member
|
1. November 2004 @ 02:20 |
Link to this message
|
http://forum.rpc1.org/portal.php
The firmware page.
My 8x media matched the code for your MCC.
With all the complaints about Ritek multiple brands I figured I would stay with what worked best for me. I have never recieved a bad batch of Prodisc. Unlike cheaper brands they burn all the way to the end with no errors detected when testing or playback.
Donald
|
|
rick5446
Suspended due to non-functional email address
|
1. November 2004 @ 09:36 |
Link to this message
|
|
Hey Their again 64026402: Next question which firmware to download? I have 1.05 now,but they list from 1.06 through 1.16,hate to download the wrong one.they've got a new one called 1.0C.
I,ve been burnig these Disc's( Mitsubishi MCC 02RG20)with my Plextor PX708A.But I can't burn more then 4.10 Gig without having bad clusters at end of Disc.
Are u useing CD Check or DVD infopro to check your Disc's
This message has been edited since posting. Last time this message was edited on 1. November 2004 @ 09:46
|
|
64026402
Senior Member
|
1. November 2004 @ 18:11 |
Link to this message
|
|
1.0c should be fine.
I normally use DVDinfo, and of course watch the movie.
You should update the Plextor also since your having problems. I have only used the Mistubitsi discs for a few weeks but I haven't had a single defect yet. I like them.
Donald
|
|
rick5446
Suspended due to non-functional email address
|
2. November 2004 @ 12:52 |
Link to this message
|
|
Thanks 64026402! I installed the 10b that cured my writing problem on the NEC 1300.My Plextor does a fine job.But as I stated if on Either writer,I burn past 4.09 Gig's I end up w/bad sectors on the tail end (no Biggie)just a little xtra work adjusting DVD Shrink.But on all 4 packs of 50 Disc's,the last Disc was unusable.Really scratched up,Bad sectors throughout the Disc's.
HEY!You read anywhere about upgradeing firmware for the Plextor PX708A to burn at 8x? I thought I read it somewhere,but don't remember where.
Hope it's so!!!Maybe not though 4x is Damn good
This message has been edited since posting. Last time this message was edited on 2. November 2004 @ 12:54
|
|
Blessedon
Member
1 product review
|
3. November 2004 @ 03:13 |
Link to this message
|
|
Reveived from Meritline order of 100 Ritek silver/shiny G04's packed in 4-25 cakebox's last week. Returned same day after opening 1st pack and 1st burned disc was jumpy. I've been a loyal Ritek user for a year now with no problems, and thanks to Afterdawn's forums I knew what to look for and do with this order.
I found 150 Verbatim MCC02RG20 for $90US and will never go back!
|
|
rick5446
Suspended due to non-functional email address
|
3. November 2004 @ 07:33 |
Link to this message
|
|
Hello their Blessedon: When u find bargains,it sure would be nice if u would Pass on to everybody where u bought them.We all have problems every once & a while.But as u say we all look for QUALITY,at it's best price.So where u buy would be helpful to all
Thanks
|
|
Blessedon
Member
1 product review
|
3. November 2004 @ 14:26 |
Link to this message
|
|
Hi back Rick. Am thrilled to be a part of the team now, willing to help always. ' should have disclosed the vendor, thanks for the reminder! This deal, like many I have found, are at Best Buy when they have a sale. Over now, sorry. Check them every Sunday and there's always some superb bargain.
|
|
64026402
Senior Member
|
3. November 2004 @ 17:19 |
Link to this message
|
|
Those are the same code as the prodisc from above.
They are $39 per 100 from rima.com.
They burn very well at 8x on my 2500 NECs.
Donald
|
|
BiG_IsH
Newbie
|
4. November 2004 @ 11:41 |
Link to this message
|
Media: ONIDTECH - 100 Pack DVD-R 4x
Retailer: http://www.ultran.com.tw/ and http://www.ebay.com/
Media Code: ONIDTECH (FAKE)
Burner: Memorex DVD+/-DLRWL1 F16
dont you ever buy this type of disk guys not real i i burnt 20 movies so far all of them hap problems and im not a noob to this is just those disk sucks ight
|
|
oquillia
Suspended due to non-functional email address
|
8. November 2004 @ 10:58 |
Link to this message
|
|
Media: 100 Pack Ritek Ridata 4X DVD-R Media G04 4.7GB (Silver Shiny) DVDR Discs, $0.45 Each
Merchant: meritline.com
Media Code: G04
been happy with meritline for a while up until recently. purchased go4 silver shiny's as always and got calibration errors with the first 5 dvd-r's. used a pioneer dvd-r and a memorex dvd-r and they worked fine. kim he at meritline's customer service told me that they must be a "bad batch" and agreed to mail me 100 back. i will give an update once i get the new "good" batch. what's the deal? are they goin nuts with supplying too many dvd-r's and started to skimp on quality dye?
|
|
64026402
Senior Member
|
8. November 2004 @ 17:16 |
Link to this message
|
|
Its best to get branded Riteks or the printables. The shiny tops haven't been reliable.
Donald
|
|
Advertisement
|
|
|
|
oquillia
Suspended due to non-functional email address
|
9. November 2004 @ 02:33 |
Link to this message
|
|
right you are! so, i just started using my replacements (god knows what they are - don't see any distinguishing brand names only numbers) and they work fine. will try the branded or printables next time. thanks for the advice. any tips on another seller other than meritline?
|
