|
Super Smash Brawl - Asking for d/l , seeding or posting a direct link = ban
|
|
|
Asking for downloads, seeding or posting a direct link will get you banned.
|
|
kevindd99
Member
|
16. April 2008 @ 12:39 |
Link to this message
|
so how can i burn the dvd dl without having the error code of "could not perform end of disc-at-once"?
|
|
Advertisement
|
 |
|
|
|
juniR
Suspended due to non-functional email address
|
16. April 2008 @ 12:55 |
Link to this message
|
Originally posted by kevindd99:
so how can i burn the dvd dl without having the error code of "could not perform end of disc-at-once"?
You asked about test mode - did you try it? I didn't say it wasn't summat worth trying - you wanted to know if the actual burn was guaranteed. I've used test mode a few times when disks wouldn't burn. One thing it does indicate if test mode doesn't work is that it's prolly not gonna happen when you try the real thing so that would give you a point to start from without wasting more disks just trying. But inevitably you will have coasters until you find the solution to the problem. And that solution might well be changing media, even if it means buying a few different types till you get one that works for you.
Wii 3.2E w/ Wiikey 1.9s :: PSP 3.90 M33-3 :: NDS w/ R4DS :: Nokia N95
|
|
juniR
Suspended due to non-functional email address
|
16. April 2008 @ 12:56 |
Link to this message
|
|
Dupe - dunno how that happened :S
Wii 3.2E w/ Wiikey 1.9s :: PSP 3.90 M33-3 :: NDS w/ R4DS :: Nokia N95
This message has been edited since posting. Last time this message was edited on 16. April 2008 @ 13:12
|
|
jessyrk
Suspended due to non-functional email address
|
17. April 2008 @ 16:46 |
Link to this message
|
hello,
if i am running 3.1J with GC2-D2C chip, can i just let the update from SSDD (Jap version) run and installing itself or do that 15-20% thing? Please advise, thx in advance.
|
|
juniR
Suspended due to non-functional email address
|
17. April 2008 @ 17:13 |
Link to this message
|
Originally posted by jessyrk:
hello,
if i am running 3.1J with GC2-D2C chip, can i just let the update from SSDD (Jap version) run and installing itself or do that 15-20% thing? Please advise, thx in advance.
SSBB - you mean - yeah just take the update all the way. Oh and GC2-D2C is the chipset not the chip. The chip is probably D2CKey as I told you in the other thread.
Wii 3.2E w/ Wiikey 1.9s :: PSP 3.90 M33-3 :: NDS w/ R4DS :: Nokia N95
|
|
jessyrk
Suspended due to non-functional email address
|
17. April 2008 @ 19:21 |
Link to this message
|
|
ok, thanks alot for all your help and quick reply there juniR. I have tried many websites to solve this problem but didn't find a solution till now.
|
|
forte09
Newbie
|
17. April 2008 @ 22:58 |
Link to this message
|
guys. do i have to update my wii like.. 3.1u and 3.2u something??, just to play my back up copy of braw
|
|
natcot
Newbie
|
19. April 2008 @ 17:41 |
Link to this message
|
OK HERE IT IS!!! Do the same thing you do to burn any game iso with image burn and do not set the layer break you don't have too, but heres the catch you need to change the book-type to dvd-rom for it to work i have an LG GSA-H54L dvd burner. To change it you must have a legit brand name lg no oem or it won't work where it says destinations where it says you burner type right click,change book-type LG drive or whatever one you have that is in the list there and change it from dvdr-dl to dvd-rom click change button then ok there you go burn at low speed and it works in the wii with the wasabi no more white screen or nothin, one more thing i used memorex DL and FUJIFILM DL and for those problem dvd drives in the wii that won't even spin up pot steak anticlockwise until it reads dl layer disc BE VERY CAREFULL i'm not responsible for what happens!!!!
|
|
Winton
Newbie
|
19. April 2008 @ 21:04 |
Link to this message
|
Originally posted by forte09:
guys. do i have to update my wii like.. 3.1u and 3.2u something??, just to play my back up copy of braw
Been pouring over these forums...and got a little confused by juniR's reply back to jessyrk above. Then, I see forte09's question....I already have 3.2U firmware, U.S. Wii (NTSC), D2CKey, but SSBB (NTSC U.S.) still requests system update. Why, if I have latest firmware?
Thanks!
|
Junior Member
|
20. April 2008 @ 06:20 |
Link to this message
|
|
omg u dont even read u need to do the update so u can play dual layer games and u need it even if u other region no brick only dual chanels but theres a way u can remove it
|
|
juniR
Suspended due to non-functional email address
|
20. April 2008 @ 06:48 |
Link to this message
|
Winton - the game has an update which is necessary to play it (basically DL update). It also has a firmware version 3.1. It will see what you have and update if necessary. If you have 3.2 it won't update the firmware but it will update to play the game.
Wii 3.2E w/ Wiikey 1.9s :: PSP 3.90 M33-3 :: NDS w/ R4DS :: Nokia N95
|
|
kevindd99
Member
|
21. April 2008 @ 11:44 |
Link to this message
|
Hi, why can't i burn this damn game? I used a Philips DVD+R DL and a generic DVD+R DL both failed burning at 51% in Nero and %50 in ImgBurn. In Nero, the error was "unable to finish end of disc-at-once" and at ImgBurn a very lengthy error code and i only remembered something with "device". why is this happening? i dont wanna waste some DL any more, they're still very expensive nowadays.
|
|
smallworm
Junior Member
|
21. April 2008 @ 12:59 |
Link to this message
|
Originally posted by kevindd99:
Hi, why can't i burn this damn game? I used a Philips DVD+R DL and a generic DVD+R DL both failed burning at 51% in Nero and %50 in ImgBurn. In Nero, the error was "unable to finish end of disc-at-once" and at ImgBurn a very lengthy error code and i only remembered something with "device". why is this happening? i dont wanna waste some DL any more, they're still very expensive nowadays.
Try Verbatim +R DL, it works for me the first time. Did you use layer break? My friend's works w/o layer break, mine works with layer break it.
This message has been edited since posting. Last time this message was edited on 21. April 2008 @ 15:06
|
|
kevindd99
Member
|
21. April 2008 @ 13:07 |
Link to this message
|
the first time i've burned it is on a philips dvd+r without layer break. then i tried it in a generic one with layer break, both failed. the first time you've burned it did it fail? will it fail if you on't use verbatim?
|
|
smallworm
Junior Member
|
21. April 2008 @ 15:00 |
Link to this message
|
Originally posted by kevindd99:
the first time i've burned it is on a philips dvd+r without layer break. then i tried it in a generic one with layer break, both failed. the first time you've burned it did it fail? will it fail if you on't use verbatim?
My first time burning was successfuly (Verbatim +R, No layer break, ImgBurn@2.4x). Second time, With layer break for my d2pro wii because the first one was frozen at the white screen, but my friend's wiikey wii could play it. So basically, both times are successfully from burning to playing.
I only bought Verbatim's DL discs because I don't wanna waste money on trying cheap discs as DL discs still expensive around $2 each. Haven't tried other brands.
This message has been edited since posting. Last time this message was edited on 21. April 2008 @ 15:05
|
|
MattRay
Newbie
|
21. April 2008 @ 18:47 |
Link to this message
|
Hi...
Ive been able to play ssbb for few weeks now.... not and again on the sub missionary thingy... when the vidoes play it freezes and says
"wii disc can not be read blah blah blah"
i usually eject the disc... put it back in... sometime have 2 do this a few time but then it works... well im at 49% and the video will not load at all...... all my other games work which are also backups..... i cant rememba wot speed i burnt it at.... but would it affect the vidoes if it hasnt affected the game
also i cant even skip this video...... still crashes :S
Thanks in advance
Matt
|
|
tboom
Newbie
|
21. April 2008 @ 22:28 |
Link to this message
|
I have a d2c chip and My sssb Works fine on my 32 wire install wii But, I purchased the wii clip with the D2c chip already on it and I put it on a different wii. All my games work except sssb I get a white screen once I press the a button to begin the game. the wii is 3.2U and It did do the update when I first put in sssb. Any help Please.
|
|
kevindd99
Member
|
22. April 2008 @ 00:55 |
Link to this message
|
|
anyone had problems like mine? the problems are stated on my post above
|
|
l46kok
Newbie
|
22. April 2008 @ 04:52 |
Link to this message
|
I got my WII that has a D2CKEY installed.
I burnt the Brawl ISO on a dual layer disc, and WII loads it properly, it's just that the game is "stuck" on a white screen after the "Now Loading" screen.
Does anyone have a solution to this? All other WII backup games works, in case if you were wondering.
Sokwhan Huh
|
|
smallworm
Junior Member
|
22. April 2008 @ 05:14 |
Link to this message
|
tboom and l46kok
Set layer break if not working without it.
AND/OR
Use verbatim DVD+R DL and burn with ImgBurn@2.4x.
This message has been edited since posting. Last time this message was edited on 22. April 2008 @ 05:17
|
|
kevindd99
Member
|
22. April 2008 @ 08:47 |
Link to this message
|
|
So, only Verbatims and no other brand works with this game?
|
|
tboom
Newbie
|
22. April 2008 @ 09:00 |
Link to this message
|
smallworm Thank you very much 10 coasters then smallworm tells me layer break and that was the problem I dont know why a wrong layer break worked on the other wii! By the way for anyone else I used verbatim at layer break 2084960
|
|
juniR
Suspended due to non-functional email address
|
22. April 2008 @ 11:35 |
Link to this message
|
Originally posted by kevindd99:
So, only Verbatims and no other brand works with this game?
No - other brands can work as well. Whether they will for an individial with a particular burner on their Wii isn't something you can generalise about tho. I have some cheap Aones working for me as well as Verbatim. You only have to read a few posts in this thread to see ppl have had success with brands other than verbatim - even some on this very page... doesn't mean to say you will be successful with those tho. Verbatim is what the guy is suggesting you try cos clearly the ones you are using ain't doing it. Ppl always seem to be reluctant to think it can be media when in fact it's the number one problem but is also very dependent on the burner.
Wii 3.2E w/ Wiikey 1.9s :: PSP 3.90 M33-3 :: NDS w/ R4DS :: Nokia N95
|
|
kevindd99
Member
|
22. April 2008 @ 11:41 |
Link to this message
|
so it means my burner have some problems with the media I used? Compatibility problems only? Since all Single Layer DVD I burned were working great.
|
|
Advertisement
|
|
|
|
juniR
Suspended due to non-functional email address
|
22. April 2008 @ 11:45 |
Link to this message
|
Originally posted by kevindd99:
so it means my burner have some problems with the media I used? Compatibility problems only? Since all Single Layer DVD I burned were working great.
Burners vary in how well they work with various brands of media. Verbatim are among the more generally compatible brands. I've seen a fair amount of success with memorex for this game as well tho that brand is generally poor with single layer.
Wii 3.2E w/ Wiikey 1.9s :: PSP 3.90 M33-3 :: NDS w/ R4DS :: Nokia N95
|
