Sony giga pocket drivers.
|
|
drews88
Suspended due to non-functional email address
|
11. March 2007 @ 03:31 |
Link to this message
|
In a previous message:
Quote: "ok - just did clean hard drive dump/replacement and upgraded to WINDOWS VISTA ULTIMATE. Everything works but Sony's MPEG Encoder...
It's recognized in the device manager (i tried to rip multiple drivers from sony - none work) but i can't get Windows Media Center to recognize the Tuner card and can't set up the TV. I tried to take Giga pocket off the original recovery discs but since that was XP it won't work. Called sony - they said wait 25-50 years and we'll get an updated driver out. Anyone have any solutions? Here's the specs:
MODEL - SONY VAIO PCV-RZ34G
RUNNING ON VISTA ULTIMATE
PENTIUM 4 - 2.8GHZ
1.5 GIGS RAM
32 BIT OPERATING SYSTEM
RUNNING 2 SIDE BY SIDE 160 GIG HARD DRIVES"
_________________________________________________________
AGAK - Ok I tried the TV Tuner Library update - and loaded in the driver. After I plug the driver in windows cuts out and goes to safe mode. I then reboot and run Windows Media Center to try and set-up the TV - but back to safe mode I go....After I disable the driver everything goes back to normal but no TV. Probably easier to just dump the crappy sony card and go to another brand....
Anyone have a gauranteed to work with Vista Ultimate and Windows Media Center TV tuner card recommendation? Also - I cannot use PCI-e - only AGP/PCI.
thanks,
drew
|
Advertisement
|
|
|
davidpalm
Newbie
|
12. March 2007 @ 21:43 |
Link to this message
|
Hi, Guys
I have a SONY VGC-V517G desktop, when I recently update the system to XP Pro SP2 after I installed SONY shared libaray and the advanced MPEG Encoder Board program it always says fail to update driver, so right now I don't know what to do.
Does anybody know what's the tuner's type or where I can find the driver for it?
Thanks a lot.
|
owesta82
Suspended due to non-functional email address
|
17. March 2007 @ 06:47 |
Link to this message
|
Hey all. .
I am looking now too. Sony is Really bad about providing drivers for their machines. You could probebly get the restore disks from sony for like 20$ plus shipping. Which WILL have all the drivers for the machine at factory Spec. So you should check your machines factory Specs. Mine..('http://www.iq.sony.com/srvs/DocsConnect/docget.asp?manualid=1982&DL=',600,560,10,10,'Manuals')
GET A MAC!!
|
burkdog
Newbie
|
20. March 2007 @ 17:06 |
Link to this message
|
I have a PCV-RZ14G with GP V5.0. The TV tuner works great. However, when trying to record I get an error after a few seconds. "Cannot record because of lack of memory or high load of Windows environment" I have no other programs running, my HD is not full at all, and the PC has 512 Mb of ram. I have done all the sony updates for my model with the same problem. I dont have the original disks anymore and they are not available for purchace either. Should I uninstall the GP V5.0 and load the V4.3 that was posted earlier? Any ideas? Or Does anyone have the original recovery disks?
|
agak
Member
|
21. March 2007 @ 05:08 |
Link to this message
|
Check your pci card type
ver 4.3 is for ENX-15 or 16
Use ramjet's version for ENX-26
|
burkdog
Newbie
|
21. March 2007 @ 05:38 |
Link to this message
|
Agak,
On a previous page of this thread it was stated that the ENX-15 has video outputs. If this is true then I have the ENX-15. It looked like someone else was trying to do the same thing I am. I never heard if it worked.
|
agak
Member
|
21. March 2007 @ 06:03 |
Link to this message
|
ENX-15 does have audio/video outputs but the only application that used them was GigaPocket and the Original version IntervideoDVD that came with Sony.
However you can use graphedit to access and use them if wanted as a video renderer or write your own application as they use a directshow filter.
|
burkdog
Newbie
|
21. March 2007 @ 06:12 |
Link to this message
|
Agak,
I'm just looking to see if I can uninstall GP V5.0 bucause it doesn't record and install GP V4.3 to see if it will take care of the problem. If I had the original disks I would just uninstall V5.0 and reinstall it.
|
xtof
Newbie
|
21. March 2007 @ 11:06 |
Link to this message
|
Hi eveybody
I just need information about the Sony enx-25 board.
During an electric storm, my father's VAIO died 1 year ago. The repair center removed the ENX-25 when changing the mother board (they put an ASUS) and gave the ENX-25 back.
I want to reinstall in his PC (I managed to extract GIGAPOCKET from Sony's DVD). It seems to work (video captured but no sound).
I was wondering if it needs to be connected to the sound adapter (there is a little 4-pin connector on the top of the board).
Do anyone have information about the ENX-25 ?
Many thanks !
Christophe
|
agak
Member
|
21. March 2007 @ 11:45 |
Link to this message
|
Read back through the pages.
This has come up a couple of times.
Some setups do need the audio cable.
|
Ballinn93
Suspended due to non-functional email address
|
23. March 2007 @ 12:48 |
Link to this message
|
Hi I have a Sony Vaio Vgc-RB38G computer. I just put a clean install of the MCE operating system, I tried the sony website and i cant get to download the drivers because I changed my motherboard, also I know my TV TUNER card is a Giga Pocket, and I dont know the model anybody help me out? Thanks!!
|
xtof
Newbie
|
23. March 2007 @ 13:13 |
Link to this message
|
Thank you Agak
I will try next time i see my father and his Vaio and I will keep you informed (some 600 km from me, may take some time before I reply).
Is there a manual somewhere available for download for these Sony capture cards ?
|
agak
Member
|
23. March 2007 @ 14:53 |
Link to this message
|
Ballinn93
Ouch,
If you changed the motherboard, it is not a Vgc-RB38G anymore.
Your card is a ENX-26.
Driver files for this has been posted. Tuner hardware library installation for MCE is the problem.
You could always use the TotalMedia3 software.
Or the GigaPocket software from ramjet.
If you still had your original board, you can restore your harddrive with a NEW 'original' image on it, uninstall the video drivers, shut down and plug in your new board.
As long as it is a similer Intel P4, it will usually reconfigure.(Done it many times)
|
Ballinn93
Suspended due to non-functional email address
|
24. March 2007 @ 08:02 |
Link to this message
|
Well agak my motherboard, and hard drive crashed so i cant so that can you send me the drivers to my email? or if you have an AIM screen name we can get these drivers becuase im in really big trouble here!! I went back through the pages and i couldnt find the drivers, so if you can send me them that would be a big help Asskckr594@aim.com
|
Ballinn93
Suspended due to non-functional email address
|
25. March 2007 @ 05:48 |
Link to this message
|
ok well I found the drivers and i downloaded them, but i am getting a weird message, and it still wont redconize it in my device mananger, can I get some help PLEASEEEE thanks!!
|
agak
Member
|
25. March 2007 @ 14:18 |
Link to this message
|
http://fileho.com/download/f2ce8d867631/Drivers.zip.html
These are the drivers for card install but MCE will want all the tuner library files installed and I not have those on a separate install.
TotalMedia3 only needed the drivers installed and recognized in Hardware Manager.
Should show up in Hardware manager with these or ramjets drivers for GigaPocket.
|
Ballinn93
Suspended due to non-functional email address
|
25. March 2007 @ 16:20 |
Link to this message
|
For some crazy reason the drivers download, but there arent any drivers in the compressed files I downloaded the TotalMedia3 thing and i still wont get my computer to redconize the card, whats going on here?
|
agak
Member
|
25. March 2007 @ 19:16 |
Link to this message
|
Checked the files and ok.
The SMRT drivers may need to be manually installed in hardware manager. Update drivers and point windows to the oem1.inf folder you downloaded.
|
davidpalm
Newbie
|
26. March 2007 @ 19:46 |
Link to this message
|
Anyone has ENX-30 driver?
Thanks a lot
|
Ballinn93
Suspended due to non-functional email address
|
28. March 2007 @ 11:16 |
Link to this message
|
Dear agak,
I have to give you a big thanks, if it werent for you Id ont really even know where I would be!!! All i ahve to say is God Bless You because your a relly nice person and If anyone is reading this and you need any driver or help this guy is your man! I cant say thanks enough!
Your Freind,
Ballinnn 93
|
setspike
Newbie
|
28. March 2007 @ 13:04 |
Link to this message
|
I also have a Sony Vaio RB38G, however my issue is a bit different.
My system crashed before I could create the backup disks, so I installed XP Professional because I didn't have a MCE disk.
If I buy a MCE disk and install it, will it automatically figure out the TV Tuner is in the machine and work? Or do I need to do something else or get some drivers?
Thanks.
Setspike
www.leetwiki.com
|
agak
Member
|
28. March 2007 @ 16:41 |
Link to this message
|
I have been using the TotalMedia3 (see previous pages) for a while (using XP Pro) on my RB38G instead of the original MCE version. Alot simpler than the MCE program and makes mpeg2 files instead of dvr-ms files. If you do go back to MCE, you will need all the original driver and tuner library files. Big pain without the recovery discs. You already have a MCE license when you bought your Vaio. Cheaper and less headache to buy or borrow a recovery disc. (although nothing works better than a nice fresh XP Pro installation)
Decisions, Decisions...
|
setspike
Newbie
|
28. March 2007 @ 17:27 |
Link to this message
|
Yeah well I'm hoping to find someone with a recovery disk.... maybe ballinn93 has his :o)
Setspike
www.leetwiki.com
|
agak
Member
|
28. March 2007 @ 19:21 |
Link to this message
|
I have the recovery disc (somewhere?).
If I can find it this weekend, maybe I can make a Nero Image and upload it. Can't promise what I don't have in my hand.
|
Advertisement
|
|
|
setspike
Newbie
|
28. March 2007 @ 20:56 |
Link to this message
|
Agak if you can make a working image from that disk, you would officially be my best friend ever and I would fly to wherever you live to shake your hand. Keep me posted.
I've got FTP servers if you need somewhere to upload it, as well.
Setspike
www.leetwiki.com
|