|
New Eurovox TX For MMDS
|
|
|
johnno197
Suspended due to non-functional email address
|
2. October 2008 @ 14:21 |
Link to this message
|
Thanks for the help scouser, it sorted itself out overnight, was the only channel affected.
|
|
Advertisement
|
 |
|
|
|
priceyder
Junior Member
|
3. October 2008 @ 09:04 |
Link to this message
|
Originally posted by johnno197:
Thanks for the help scouser, it sorted itself out overnight, was the only channel affected.
Hi.
just wondering if anyone knows how often you need to flash the box is it random or does it happen on a regular basis?
any info appreciated.
priceyder
|
Senior Member
2 product reviews
|
3. October 2008 @ 09:11 |
Link to this message
|
Originally posted by priceyder:
Originally posted by johnno197:
Thanks for the help scouser, it sorted itself out overnight, was the only channel affected.
Hi.
just wondering if anyone knows how often you need to flash the box is it random or does it happen on a regular basis?
any info appreciated.
normally once, but may require updates as situations are subject to change without notice ;)
|
|
priceyder
Junior Member
|
3. October 2008 @ 09:23 |
Link to this message
|
Originally posted by axxxo:
Originally posted by priceyder:
Originally posted by johnno197:
Thanks for the help scouser, it sorted itself out overnight, was the only channel affected.
Hi.
just wondering if anyone knows how often you need to flash the box is it random or does it happen on a regular basis?
any info appreciated.
normally once, but may require updates as situations are subject to change without notice ;)
ta axxxo.
will keep my fingers crossed.
priceyder
|
|
mikeymoo
Newbie
|
21. October 2008 @ 05:50 |
Link to this message
|
Hi there,
I am having problems with my eurovox tx and was hoping someone could shed a bit of light on the problem. here is the story.
I have a eurovox already but i got another one for a mate so i hooked it up as normal to his mmds cable(the same as my own one) and i tried to install the channels but it only picked up 1 channel(now i got this box off another company as the place i got my own were sold out) so i presumed this boxed needed to be flashed..So i flashed the box in accordance to the info giving here.I presume it downloaded as while it was transfering the numbers on the box were going up..When it said the download was complete i hooked up the box as normal like my own but now the box seems to be jamed or stuck.When i turned it on the box was stuck on channel 2 and the box was not responding to the remote nor was anything coming on the tv..Now could the software have locked the box or does anyone know what happened here....Thanks for your help and time on this :)
|
|
glog
Junior Member
|
21. October 2008 @ 05:56 |
Link to this message
|
|
The TX is for MMDS transmissions only.
You mention 'MMDS Cable', can you confirm if its N*L or Cho*us and if it is in fact MMDS or true cable ?
|
|
mikeymoo
Newbie
|
21. October 2008 @ 08:37 |
Link to this message
|
Originally posted by glog:
The TX is for MMDS transmissions only.
You mention 'MMDS Cable', can you confirm if its N*L or Cho*us and if it is in fact MMDS or true cable ?
Its mmds....And its chorus....I was thinkin i might try download the software again ??
Any ideas??
|
|
mikeymoo
Newbie
|
21. October 2008 @ 13:23 |
Link to this message
|
Originally posted by mikeymoo:
Originally posted by glog:
The TX is for MMDS transmissions only.
You mention 'MMDS Cable', can you confirm if its N*L or Cho*us and if it is in fact MMDS or true cable ?
Its mmds....And its chorus....I was thinkin i might try download the software again ??
Any ideas??
Tried to download the software again and it come up on the box undl(which i presume is unavailable download)...it went back to freezing on the channel 2 again????
|
AfterDawn Addict
|
21. October 2008 @ 15:35 |
Link to this message
|
This error is caused by incorrect flashing.
Download this file from Eamos here use winzip, winrar or any other unzip utility to unwrap it first.
SW downloads Procedure: You should download two times to revive boot file.
1) Turn off the STB
2) Access STB Loader 1.1.exe
3) Select Boot File only - > Press Browser and then select boot_e02.bin
4) Press ?Execution ?and then turn on the STB.
5) Wait until box automatically re-boots.
6) If successful download, LED Displays ?boot -> 02 ? - > and then select ?Download ? on the STBLoader 1.1.exe.
7) Press ?Browser ?and then EVX TX_20071210_v002.bin
8) Press ?Execution ?and Wait until box automatically re-boots.
9) If successful download, LED Displayed ?boot -> 02 -> On ?
OK, the box is now ready to flash and will now need the EVX TX_H_071123.bin flash putting on it as normal. You will get it here
Use the loader you have and flash again.
|
|
mikeymoo
Newbie
|
22. October 2008 @ 14:19 |
Link to this message
|
Originally posted by sc0user:
This error is caused by incorrect flashing.
Download this file from Eamos here use winzip, winrar or any other unzip utility to unwrap it first.
SW downloads Procedure: You should download two times to revive boot file.
1) Turn off the STB
2) Access STB Loader 1.1.exe
3) Select Boot File only - > Press Browser and then select boot_e02.bin
4) Press ?Execution ?and then turn on the STB.
5) Wait until box automatically re-boots.
6) If successful download, LED Displays ?boot -> 02 ? - > and then select ?Download ? on the STBLoader 1.1.exe.
7) Press ?Browser ?and then EVX TX_20071210_v002.bin
8) Press ?Execution ?and Wait until box automatically re-boots.
9) If successful download, LED Displayed ?boot -> 02 -> On ?
OK, the box is now ready to flash and will now need the EVX TX_H_071123.bin flash putting on it as normal. You will get it here
Use the loader you have and flash again.
Ok all has worked up to the last point...I got the EVX TX_H_071123.bin
but i dont understand how to find the loader and flash again.If u could explain how to flash it step by step like previous that would be great as i am useless with computers...Thanks a lot
|
|
kopkidda
Member
|
23. October 2008 @ 06:35 |
Link to this message
|
Alright lads,can someone confirm for me the the Eurovox Tx will work in Wexford(Rosslare to be precise) and is wexford a Chorus MMDS area?
|
|
mark_eire
Junior Member
|
23. October 2008 @ 06:50 |
Link to this message
|
|
Hi guys just wondering if anyone had issues with ther EVTX last night? mine rebooted about 7 times during the liverpool match i had to use the switch at the back to turn it off for about 30 secs it worked after that? anyone seen it before ??
|
AfterDawn Addict
|
23. October 2008 @ 07:26 |
Link to this message
|
Quote:
Ok all has worked up to the last point...I got the EVX TX_H_071123.bin
but i dont understand how to find the loader and flash again.If u could explain how to flash it step by step like previous that would be great as i am useless with computers...Thanks a lot
I thought you said you had flashed it previous to your problem and hence you knew how to do it.
|
|
mark_eire
Junior Member
|
23. October 2008 @ 08:56 |
Link to this message
|
Originally posted by kopkidda:
Alright lads,can someone confirm for me the the Eurovox Tx will work in Wexford(Rosslare to be precise) and is wexford a Chorus MMDS area?
there is loads of questions like this on previous pages ring your service provider and find out if your area is MMDS if so a the TX will work i'm on C****s in meath and the EVTX works ok. remember you might only get about 85 channels (like i did) as apposed to over 100 back when i lived in dublin depending on the signal strenght transponder location etc..just do a search @ the top of the page you'll find all the info you need hope this helps
cheers
|
Junior Member
|
23. October 2008 @ 10:11 |
Link to this message
|
Hi can anyone help we have ch-orus mmds and the eurovox wont work as our antenna is a birdsmouth type like a beak shape what type of box would work on this does anyone have any feedback please thanks
kevin
|
|
mark_eire
Junior Member
|
23. October 2008 @ 10:39 |
Link to this message
|
Originally posted by KEVINq001:
Hi can anyone help we have ch-orus mmds and the eurovox wont work as our antenna is a birdsmouth type like a beak shape what type of box would work on this does anyone have any feedback please thanks
kevin
Kevin if its a Eurovox max v it wont work in an MMDS area you need to get a terrestrial receiver eg: EuroVox TX the Box-T or digivox-T not sure about the antenna though maybe scouser can help there....
|
|
mikeymoo
Newbie
|
23. October 2008 @ 12:24 |
Link to this message
|
Originally posted by sc0user:
Quote:
Ok all has worked up to the last point...I got the EVX TX_H_071123.bin
but i dont understand how to find the loader and flash again.If u could explain how to flash it step by step like previous that would be great as i am useless with computers...Thanks a lot
I thought you said you had flashed it previous to your problem and hence you knew how to do it.
Yeah i tried it before but thats where all the problem came from in the 1st place..If you could take me through flashing it step by step i would be most grateful...??
|
Junior Member
|
23. October 2008 @ 12:44 |
Link to this message
|
hi no its a eurovox tx only a few channels work with the antenna cho-us supplied which is aparantly a birds mouth type which can receive broadband also would the digivox t work with that
|
|
roguehawk
Newbie
|
1. November 2008 @ 19:53 |
Link to this message
|
Have eurovox tx and cannot get any channels. what MMDS is used in Greystones?
Roguehawk
|
|
lugnagun
Suspended due to non-functional email address
|
2. November 2008 @ 16:10 |
Link to this message
|
Hi i have a eurovox max 2008 and it keeps shutting down and restarting some times yhe channels are there but not epg and sometimes i have to unplug it before it starts again anyone got the same problem or ideas....
|
AfterDawn Addict
|
2. November 2008 @ 18:53 |
Link to this message
|
Originally posted by lugnagun:
Hi i have a eurovox max 2008 and it keeps shutting down and restarting some times yhe channels are there but not epg and sometimes i have to unplug it before it starts again anyone got the same problem or ideas....
This is a TX related thread. Have a read through Hitecks guide, you may need to reflash it.
|
AfterDawn Addict
|
2. November 2008 @ 18:55 |
Link to this message
|
Originally posted by roguehawk:
Have eurovox tx and cannot get any channels. what MMDS is used in Greystones?
Roguehawk
Its still analogue only, supposed to be upgraded a while back.
|
|
mgb17
Senior Member
|
3. November 2008 @ 02:43 |
Link to this message
|
|
Greystones is N*l mmds.
Btw I don't think there is a analogue only exch*rus mmds transmitter left over. True cable is a other story.
|
|
JRJack
Junior Member
|
3. November 2008 @ 06:18 |
Link to this message
|
Hey. I bought a Eurovox Tx for a mate of mine and it has Tx 11-11-07 (i think) software on it. I know this is wrong as mine has TX 23 software. i have downloaded EVX TX_H_071123.bin which i presume is the update.
Can anyone tell me the procedure to upload this on to the Eurovox
JR
|
|
Advertisement
|
|
|
|
JRJack
Junior Member
|
3. November 2008 @ 15:02 |
Link to this message
|
|
Lads trying to upload the software 23-11-07 but having no joy with it. im uploading the software via a laptop, can i upload it from a laptop or do i need a pc
JR
|
