|
Can't copy saw 3 - **just needs DVDFab Decrypter**
|
|
|
PacMan777
AfterDawn Addict
|
8. January 2007 @ 23:24 |
Link to this message
|
Originally posted by MichaelP1:
clonedvd 2 is your best bet with AnyDVD there made for eachother
It works good. But I don't know if I'd go that far. I have CloneDVD 2, but I haven't used it in a long time. I use AnyDVD most of the time though. I don't have any problems and I've backed up most of the troublesome releases mentioned. With good decryption most of the transcoders and encoders will work okay.
|
|
Advertisement
|
 |
|
|
|
CD0728
Junior Member
|
9. January 2007 @ 00:42 |
Link to this message
|
My best bet is AnyDVD and DVDShrink. This was my first time that
I use CloneDVD2, and I was happy because I was able to decrypt Saw III at last.
|
|
N2DVD
Senior Member
1 product review
|
9. January 2007 @ 04:27 |
Link to this message
|
@CD0728, Any luck posting the AnyDVD 6.1.0.3 status screen on SAW III? Again I'd like myself and everyone to see whats on the SAW III in terms of encryption. Thanks.:P
|
Moderator
|
9. January 2007 @ 15:25 |
Link to this message
|
|
Yeah I wouldn't mind seeing a shot of the copy protection myself.
My guess is since it's a Liongate it probably similar to Cranks - Sony ARccOS, Puppetlock, 8 bad sectors etc.
|
Junior Member
|
9. January 2007 @ 16:25 |
Link to this message
|
|
I read somewhere that it has 99 VTS files. lol
|
|
vkn
Suspended due to non-functional email address
|
13. January 2007 @ 15:30 |
Link to this message
|
lionsgate yea usual arccos and puppetlock
http://www.vknyvz.com
Intel Core 2 Duo E6400 Conroe 2.13GHz
ASUS P5L-MX Socket T (LGA 775) Intel 945G
ASUS TM-250 Black 0.6mm SECC MicroATX
OCZ 1GB 240-Pin DDR2 SDRAM PC2 5400
620GB WD and Seagate HDD in Raid 0
DELL 2007WFP 20 inch Wide-Screen LCD
No Graphic Card atm using onbard will buy soon!
Sony Ericsson P990i
|
Moderator
|
13. January 2007 @ 15:59 |
Link to this message
|
@vkn
What else did you use besides AnyDVD? Do a full backup?
Txs for the pic of the protection from 6.1.0.6
|
AfterDawn Addict
|
13. January 2007 @ 18:12 |
Link to this message
|
Originally posted by vkn:
lionsgate yea usual arccos and puppetlock
With the confirmation from above, I foresee a lot of newbies are going to ask tons of questions, LOL. However, I'm "not" going to worry about it.
Again, after the ripping process, I highly recommend running FixVTS or have VobBlanker or PgcEdit to blank out any suspicious cells, vts or pgcs to prevent your backup from "looping" or getting cripple.
Welcome to the real world of "editing."
|
|
vkn
Suspended due to non-functional email address
|
13. January 2007 @ 18:17 |
Link to this message
|
OK here's my report
- RIPIT4ME fails even reading the drive
- AnyDVD along with Nero recode 2 burns just fine (DVD5 or DVD9) however resulting dvd won't playable, it is weird
- AnyDVD along with clonedvd2 burned with ONLY the movie same result, the output didn't play, it play when you analyze with Nero recode 2
there are 40 protected cells in this DVD some new protection obviously, gotta find a way to rip/copy
some guy said he burned with AnyDVD and clonedvd2 (only the movie tho) but no when i do that it completes but movie won't play on a dvd player
anybody actually succeeded ripping this let me know...
(hey guys i am no noob :) )
http://www.vknyvz.com
Intel Core 2 Duo E6400 Conroe 2.13GHz
ASUS P5L-MX Socket T (LGA 775) Intel 945G
ASUS TM-250 Black 0.6mm SECC MicroATX
OCZ 1GB 240-Pin DDR2 SDRAM PC2 5400
620GB WD and Seagate HDD in Raid 0
DELL 2007WFP 20 inch Wide-Screen LCD
No Graphic Card atm using onbard will buy soon!
Sony Ericsson P990i
|
|
vkn
Suspended due to non-functional email address
|
13. January 2007 @ 18:33 |
Link to this message
|
i ran the fixvts for the output i got from clonedvd2 (w/ AnyDVD in the bg) but still the same not playable
nero recode2 analyzes just fine, movie preview works flawlessly in recode2, it is weird, just won't play in the dvd player
http://www.vknyvz.com
Intel Core 2 Duo E6400 Conroe 2.13GHz
ASUS P5L-MX Socket T (LGA 775) Intel 945G
ASUS TM-250 Black 0.6mm SECC MicroATX
OCZ 1GB 240-Pin DDR2 SDRAM PC2 5400
620GB WD and Seagate HDD in Raid 0
DELL 2007WFP 20 inch Wide-Screen LCD
No Graphic Card atm using onbard will buy soon!
Sony Ericsson P990i
This message has been edited since posting. Last time this message was edited on 13. January 2007 @ 18:52
|
AfterDawn Addict
|
13. January 2007 @ 19:12 |
Link to this message
|
Originally posted by vkn:
i ran the fixvts for the output i got from clonedvd2 (w/ AnyDVD in the bg) but still the same not playable
nero recode2 analyzes just fine, movie preview works flawlessly in recode2, it is weird, just won't play in the dvd player
Are you using the latest FixVTS or RipIt4Me? Have you tried to "blank & delete" some of them useless cells, pgcs or vts and run it through the latest VobBlanker? Or if you can, then it's wise to "delete or blank" some menus to prevent from looping as well.
Most of Lions Gates and newer Sonys usually can cause your backup to "loop" and or "cripple" so your backup can't play.
Hmmm... I'll be sure to grab one when it's out on Tuesday for sure and see what's going to happen. Afterall, SAW III is pretty good -- I saw it at the big screen when it first came out and I sure want to own the DVD now.
|
Moderator
|
13. January 2007 @ 19:27 |
Link to this message
|
@vkn
If you haven't already try DVDFab Decrypter to rip w/ - then run thru VobBlanker or FixVTS.
The disc play on the pc just not the player?
The most I've ever seen AnyDVD report for bad sectors is 9 - 40 is really pushing it :)
Totally lame answer but you may want to email SlySoft and see if they have an answer. You could always zip & send them the ifo files too.
I'd love to get this one early but will more than likely be the 23rd when I pick it up.
|
|
vkn
Suspended due to non-functional email address
|
13. January 2007 @ 19:52 |
Link to this message
|
|
@binkie7
i personally start to dislike dvdfab, it doesn't work as the older versions do, it doesn't get pass the analyzing the disc even on saw 3
the output plays on powerdvd 7 if you specifically open the file
(VTS_08_1.VOB 2 3 4 and 5) these are 0.99gb you know.
but when you choose disc mode and select the video_ts folder then powerdvd freezes. so my answer should be 'no it doesn't even work on the pc'
any work around on SAW III ?
http://www.vknyvz.com
Intel Core 2 Duo E6400 Conroe 2.13GHz
ASUS P5L-MX Socket T (LGA 775) Intel 945G
ASUS TM-250 Black 0.6mm SECC MicroATX
OCZ 1GB 240-Pin DDR2 SDRAM PC2 5400
620GB WD and Seagate HDD in Raid 0
DELL 2007WFP 20 inch Wide-Screen LCD
No Graphic Card atm using onbard will buy soon!
Sony Ericsson P990i
|
|
vkn
Suspended due to non-functional email address
|
13. January 2007 @ 19:58 |
Link to this message
|
|
i REALLY thought SONY was the ACE of this stuff, but no thumbs up for the LIONS GATE lol
i guess i am one of those few people who gets DVDs early here :)
http://www.vknyvz.com
Intel Core 2 Duo E6400 Conroe 2.13GHz
ASUS P5L-MX Socket T (LGA 775) Intel 945G
ASUS TM-250 Black 0.6mm SECC MicroATX
OCZ 1GB 240-Pin DDR2 SDRAM PC2 5400
620GB WD and Seagate HDD in Raid 0
DELL 2007WFP 20 inch Wide-Screen LCD
No Graphic Card atm using onbard will buy soon!
Sony Ericsson P990i
This message has been edited since posting. Last time this message was edited on 13. January 2007 @ 19:59
|
|
MichaelP1
Suspended permanently
|
13. January 2007 @ 20:14 |
Link to this message
|
try ripping it to the HD with the AnyDVD ripping checking the box "Remove unreferenced and blank cells" then transcode with CloneDVD 2 "doing the movie only" and burn no faster than 8x with good blank media (Taiyo Yuden or Verbatim) and let us know how you come out
We shall go to the end,we shall fight in France,we shall fight on the seas and oceans,we shall fight with growing confidence and growing strength in the air,we shall defend our Island,whatever the cost may be,we shall fight on the beaches,we shall fight on the landing grounds,we shall fight in the fields and in the streets,we shall fight in the hills;we shall never surrender
|
Moderator
|
13. January 2007 @ 20:29 |
Link to this message
|
I can sometimes buy them early but I don't think I can on this one.
And I would love to get this one early just to play.
Hang tight if you can - AnyDVD has had 3 beta versions out these past few days so looks like they are really working on it.
They haven't let me down yet so .....
Someone please correct me if I'm wrong or confused :) but Puppetlock and ARccOS are Sony's protection scheme and the rest of the typical pattern that AnyDVD displays.
Lions Gate may be owned by them or bought the copy protection from them?
Kinda funny cause a coworker of mine has a film distributed by Lions Gate (Fear of Clowns) and no new stuff on it :0)
edit: typos, grammar :)
This message has been edited since posting. Last time this message was edited on 13. January 2007 @ 20:36
|
AfterDawn Addict
|
13. January 2007 @ 21:53 |
Link to this message
|
Quote:
Someone please correct me if I'm wrong or confused :) but Puppetlock and ARccOS are Sony's protection scheme and the rest of the typical pattern that AnyDVD displays.
Lions Gate may be owned by them or bought the copy protection from them?
@binkie
You are correct, most of Lions Gate DVDs are encrypted with Sony's ARccOS and Puppetlock. Personally, I think ARccOS and Puppetlock are much tougher/nastier than Macrovision's RipGuard.
Back to the subject (SAW III), hmmm.... I would love to see how complicated this goes when it's out on this coming Tuesday. Anyhow, like always, I have my trust with both DVDFab Decrypter and RipIt4Me with the helps from VobBlanker to blank/delete out corrupted/suspicious cells, vts, pgcs and FixVTS to blank and process afterward.
|
Moderator
|
13. January 2007 @ 22:16 |
Link to this message
|
|
Dang doesn't get released here until 1/23 - I have an extra week to wait to play w/ it :)
Haven't seen Saw III yet but loved the first 2 so it's definitely on my hit list.
|
|
vkn
Suspended due to non-functional email address
|
13. January 2007 @ 22:21 |
Link to this message
|
|
well i just finished watching the movie, well it seems like i will give it a try tomorrow again
hope will figure it out today, coz i will have to return it by 6
http://www.vknyvz.com
Intel Core 2 Duo E6400 Conroe 2.13GHz
ASUS P5L-MX Socket T (LGA 775) Intel 945G
ASUS TM-250 Black 0.6mm SECC MicroATX
OCZ 1GB 240-Pin DDR2 SDRAM PC2 5400
620GB WD and Seagate HDD in Raid 0
DELL 2007WFP 20 inch Wide-Screen LCD
No Graphic Card atm using onbard will buy soon!
Sony Ericsson P990i
|
|
MichaelP1
Suspended permanently
|
13. January 2007 @ 22:30 |
Link to this message
|
|
yeah its released the 23th not the 16th
We shall go to the end,we shall fight in France,we shall fight on the seas and oceans,we shall fight with growing confidence and growing strength in the air,we shall defend our Island,whatever the cost may be,we shall fight on the beaches,we shall fight on the landing grounds,we shall fight in the fields and in the streets,we shall fight in the hills;we shall never surrender
|
|
paschal93
Suspended due to non-functional email address
|
14. January 2007 @ 03:22 |
Link to this message
|
vkn interested in more information using ripit4me first are you using the 1.6.4.0? Second when you said the disk did not read can please try to start ripit4me then insert disk once you get the notification about the autoplay being blocked then play the dvd using any kind of software player for a few seconds, then try using the one click method to rip the dvd. Also be sure AnyDVD is not running. Thank You.
|
|
PacMan777
AfterDawn Addict
|
14. January 2007 @ 03:25 |
Link to this message
|
Quote:
coz i will have to return it by 6
Did we need to know that? ;)
Binkie
I've noticed the same studioes using different levels of copy protection on their releases. I guess they want to protect some more than others. With the AnyDVD info window, I've gotten used to scanning to see what's protecting the DVDs. I'll probably buy Saw III to see what's on it. I've got the other 2. I hope this doesn't turn into a "Friday the 13th 103" deal.
|
|
talonman
Suspended due to non-functional email address
|
14. January 2007 @ 04:18 |
Link to this message
|
it looks like ripit4me is working on it. go here and read what they say http://www.ripit4me.org/. Looks to me like they think they have beat it and schottas.
this is just what I have noticed.
good luck everyone
|
Moderator
|
14. January 2007 @ 06:25 |
Link to this message
|
@PacMan777
lol - that's what I do - wait the few secs for AnyDVD to analysis it then give me the info. I'd probably be lost w/o that feature :)
So far the Saw movies haven't let me down in liking them but yeah how far can they push it.
@vkn
Yep a little more info than we need (may want to edit that out of your post - hint forum rules)
|
|
Advertisement
|
|
|
Moderator
|
14. January 2007 @ 07:12 |
Link to this message
|
Update AnyDVD has been updated now to 6.1.0.7:
6.1.0.7 2007 01 14
- New: Added support for new versions of the SONY Arccos protection
to the option to remove "Protection based on unreadable Sectors"
- New: Improved "Jump to title menu" with some discs containing
TV episodes
- New: Workaround for bug in I/O subsystem of Windows Vista,
which can cause BSOD with copy protected DVDs
- New: Workaround for problem with U3 USB memory sticks
- New: improved display of drive type in AnyDVD status and drive
selection window
|
