|
starview problems help needed please
|
|
Senior Member
1 product review
|
10. August 2007 @ 09:05 |
Link to this message
|
Originally posted by scunny:
Hello all, I got a "THE BOX" yesterday on the basis that it was plug and play. Well I've plugged but it only makes a row of lights across the front move.I just moved it into the place my starview is working put all leads in right places but it never gets to ON. When I replace the starview into that position on same leads ect it starts just the same, lights moving across but within a couple of seconds it shows on and works fine. Am I missing something ? I aren't too hot on a computer so don't fancy giving that a try. Any help much appreciated.
probably no firmware on it m8 !
click the link ( starview) under my post and follow that. come back if your still stuck...
|
|
Advertisement
|
 |
|
|
|
ps1960
Newbie
|
10. August 2007 @ 09:05 |
Link to this message
|
mainam
yeah all my settings in the gt rom were as you put on here
except for the com port which comes up as access denied but
i think thats the one for my monitor so i change it to com 2
and as i've said before my pc sounds like its tryin to work
on it but all i get is the flash update fail message come up.
is there anything else in the port settings that could be causing
it??.
my box has the 25x7 vents so from what you say it looks like
its a genuine. i've probably asked you this before but not
sure if you gave me an answer,when i look in the system info
on the box it shows the ver 3 i flashed to it in may. should
that still be showing on there as it obviously wasn't there
from new??
cheers again
paul
bristol
|
AfterDawn Addict
|
10. August 2007 @ 09:05 |
Link to this message
|
Originally posted by scunny:
Hello all, I got a "THE BOX" yesterday on the basis that it was plug and play. Well I've plugged but it only makes a row of lights across the front move.I just moved it into the place my starview is working put all leads in right places but it never gets to ON. When I replace the starview into that position on same leads ect it starts just the same, lights moving across but within a couple of seconds it shows on and works fine. Am I missing something ? I aren't too hot on a computer so don't fancy giving that a try. Any help much appreciated.
You need to flash the box with the latest firmware, 4.50 for Ireland or 4.51 for the UK.
|
AfterDawn Addict
|
10. August 2007 @ 09:07 |
Link to this message
|
Originally posted by MAINAMN:
Originally posted by scunny:
Hello all, I got a "THE BOX" yesterday on the basis that it was plug and play. Well I've plugged but it only makes a row of lights across the front move.I just moved it into the place my starview is working put all leads in right places but it never gets to ON. When I replace the starview into that position on same leads ect it starts just the same, lights moving across but within a couple of seconds it shows on and works fine. Am I missing something ? I aren't too hot on a computer so don't fancy giving that a try. Any help much appreciated.
probably no firmware on it m8 !
click the link ( starview) under my post and follow that. come back if your still stuck...
Lightning sometimes does strike the same place twice :)
This message has been edited since posting. Last time this message was edited on 10. August 2007 @ 09:12
|
Senior Member
1 product review
|
10. August 2007 @ 09:11 |
Link to this message
|
Originally posted by ps1960:
mainam
yeah all my settings in the gt rom were as you put on here
except for the com port which comes up as access denied but
i think thats the one for my monitor so i change it to com 2
and as i've said before my pc sounds like its tryin to work
on it but all i get is the flash update fail message come up.
is there anything else in the port settings that could be causing
it??.
my box has the 25x7 vents so from what you say it looks like
its a genuine. i've probably asked you this before but not
sure if you gave me an answer,when i look in the system info
on the box it shows the ver 3 i flashed to it in may. should
that still be showing on there as it obviously wasn't there
from new??
cheers again
paul
bristol
hi m8, it depends on when u got it, i doubt it though , it probably had 257 or something.
v3 freezes alot thats why its better to get v4 onto it
|
AfterDawn Addict
|
10. August 2007 @ 09:12 |
Link to this message
|
Originally posted by l33na:
there is just a 0showing .
0 showing sounds like a faulty box, not just a firmware/bootloader issue. Could be the tuner or something else. The Starview is like any electrical device some of them do become faulty. If you said it had leds like this ----, that would indicate a bad flash. Or no power at all would indicate it needed to be jtagged. You could still give the jtag a go as a last resort.
Sorry for been the bearer of bad news.
|
Senior Member
1 product review
|
10. August 2007 @ 09:18 |
Link to this message
|
|
beat me too the punch scouser m8 lol
|
AfterDawn Addict
|
10. August 2007 @ 09:23 |
Link to this message
|
Originally posted by MAINAMN:
beat me too the punch scouser m8 lol
LOL thats me for the evening bit of beering to do, catch you over the weekend Main ;)
|
Senior Member
1 product review
|
10. August 2007 @ 09:32 |
Link to this message
|
|
me too , but ill be here or over on eamo's later
enjoy
all the best m8
|
|
scunny
Junior Member
|
10. August 2007 @ 09:47 |
Link to this message
|
|
Thanks for suggestions but you've nearly blown my thick brickies brain up! I think I will just have to wait for my mate with a brain to return from his holidays.By the way no lights on at all now its connected to pc.
|
|
Advertisement
|
|
|
Senior Member
1 product review
|
10. August 2007 @ 12:00 |
Link to this message
|
|
sorry mate it looks like u have a faulty box .
a jtag as my man scouser has posted may work !
it may just be a conection problem which your mate could have a look at ,' hands on '
lets know how u do .........
|
