|
|
|
Tried buying new DVD-Rs, still having trouble...please help.
|
|
|
ShockTXB
Junior Member
|
15. October 2005 @ 19:14 |
Link to this message
|
|
Ok, I had trouble the other night with burning using TDKs and everyone said get better disks so I went and picked up Fujifilm DVD-Rs as suggested. Still not able to burn...getting the failure message as soon as I put in a blank disk and it starts to read.
Anyways here's the error message...Please can someone tell WTF is going on?
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR CD-R PX-W4824A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST380011A atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR CD-R PX-W4824A D: CDRom0
PIONEER DVD-RW DVR-105 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 20 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.10.2005
NeroAPI
11:07:10 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
11:07:10 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
11:07:10 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
11:07:10 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
11:07:10 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:07:10 PM #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
11:07:10 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:07:10 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:07:10 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:08:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
11:08:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
11:08:28 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
11:08:28 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD-R/RW.)
11:08:28 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
11:08:28 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
11:08:28 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
11:08:28 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
11:08:28 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
11:08:28 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
11:08:28 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:08:28 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
11:08:28 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
11:08:28 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No
11:08:28 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:08:31 PM #25 Text 0 File Cdrdrv.cpp, Line 1286
23:08:31.187 - PIONEER DVD-RW DVR-105\H0 T1 : Queue again later
11:08:38 PM #26 SCSI -1061 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x01060000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x18 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
11:08:38 PM #27 CDR -1061 File Writer.cpp, Line 311
Internal target failure
11:08:38 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:08:38 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:08:38 PM #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 767
11:08:38 PM #31 Phase 133 File APIProgress.cpp, Line 276
Writing short lead-out
11:08:38 PM #32 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04
11:08:38 PM #33 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
11:08:38 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
11:08:38 PM #35 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
11:08:38 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:08:38 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 10/1/2005 1:55:34 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
|
temj
Member
|
15. October 2005 @ 20:36 |
Link to this message
|
Quote:
"Sense Key: 0x04 (KEY_HARDWARE_ERROR) "
KEY_HARDWARE_ERROR - Indicates that the target detected a non-recoverable hardware failure while performing the command or during a self test. (your drive might be malfunctioning)
Have you installed SP2 for XP?
|
|
ShockTXB
Junior Member
|
15. October 2005 @ 20:45 |
Link to this message
|
I'm pretty sure I have service Pack 2 installed yes. I have been able to burn DVDs for more than a year or so, this has just been giving me trouble in the last week or two. All of a sudden instead of having a DVD fail 1/10 times, it's more like 8/10 lately.
Like I said, I got new disks of a different brand but still having trouble. I haven't edited or changed any settings on my PC either.
Think the drive is just dying on me? Do I need a new burner?
Also...in case someone is interested in seeing the errors I was getting before witht the TDK disks, here's a link to my first thread last week:
http://forums.afterdawn.com/thread_view.cfm/243018
Note that the first error was before I updated Nero, and the 2nd in that thread was the error I was still getting after updating...
So I'm at a loss...any help would be appreciated...and if someone actually figures out what's wrong and I can get back to burning bliss, you'll be my hero of the day.
This message has been edited since posting. Last time this message was edited on 15. October 2005 @ 20:52
|
|
calhounm
Suspended due to non-functional email address
|
15. October 2005 @ 21:36 |
Link to this message
|
|
do you have trouble burning other discs and also as far as media is concerned you have to find what works best for you burner mine likes verbatum
Duck tape is like the force, it has a light side, a dark side and it holds the world together.
|
|
ShockTXB
Junior Member
|
15. October 2005 @ 21:43 |
Link to this message
|
|
I haven't tried verbatim...just TDK and Fuji, and long ago I believe I've used some Magnavox ones. I never had any problem with any kinds till recently. I only tried one Fuji tonight after buying them at Best Buy. They had the Verbatim there too, but not the Data something or other ones someone mentioned, so I got the Fujifilm disks.
I really don't want to have to buy every brand there is...that can't be right.
I'd hate to keep going and buying packs of disks and end up with more coasters. There has to be something wrong, not just that my drive doesn't like some brand or whatever. Otherwise why didn't I have any problem for the last year plus.
I'm starting to think I just need a new DVD burner. Thinking of just getting an external Sony Dual Layer burner and giving that a go...
Unless someone can give me a better idea other than buying every brand disk there is and hoping one works...that just can't be the best way to go about it.
|
|
calhounm
Suspended due to non-functional email address
|
15. October 2005 @ 22:35 |
Link to this message
|
|
no lets not spend all of your money I was talking about doing research on your drive and seeing if there is a preference. also you did not answer my question do you have a problem burning other things. by the way you can buy good discs online alot cheaper than bert buy but lets try to fix the cheaper option first.
Duck tape is like the force, it has a light side, a dark side and it holds the world together.
|
|
ShockTXB
Junior Member
|
15. October 2005 @ 22:42 |
Link to this message
|
|
I'll try burning a CD...I'll get back to you. Also not sure how to research what types of media my drive likes.
PIONEER DVD-RW DVR-105
That's my drive. I don't know why I wouldn't have had a problem burning until now if it were a matter of disks. Anyways, I'll try ripping a CD quick and get back to you. Also, I'll try just copying data to a DVD and see how that goes.
Thanks.
This message has been edited since posting. Last time this message was edited on 15. October 2005 @ 22:43
|
|
ShockTXB
Junior Member
|
15. October 2005 @ 23:01 |
Link to this message
|
|
Ok something odd is going on...when I view the drive in My Computer I can see the CR-RW Drive (D:) and DVD-RW Drive (E:)
If I put a blank DVD in the E: drive, either the TDK or the Fuji, it switches to say CD Drive (E:) and if i double click to open it i get an error message saying the drive is not accessible.
However, if I put in a DVD it correctly shows the DVD title and (E:) drive. And I am also able to decode the DVD in DVD Shrink, so reading it is not a problem.
I also tried putting in a backup of a DVD I was able to successfully burn a little while ago with the same results, which is one of the TDK disks from the pack I've been having trouble with now.
So it seems it's reading DVD's with info already on them, but when I put either blank TDK DVD-R or a Fujifilm DVD-R it's acting like there's nothing in the drive...what's up with that?
This message has been edited since posting. Last time this message was edited on 15. October 2005 @ 23:03
|
|
ShockTXB
Junior Member
|
15. October 2005 @ 23:48 |
Link to this message
|
Ok, just keeps getting more strange. for the hell of it, I just tried opening Nero and adding the files that shrink encoded to a temp folder and burned. Apparently, I was able to burn the DVD after ripping the files with shrink but by opening Nero directly and using that, rather than using shrink to burn. does that make any sense? i used the TDK discs. burned fine, and i tried it out in my dvd player and everything is cool.
anyone have a clue why this would happen?
|
Moderator
|
16. October 2005 @ 02:12 |
Link to this message
|
i'll get my slight moan out of the way, you could have persevered with the original problem here - http://forums.afterdawn.com/thread_view.cfm/243018 - it just makes our job harder that's all..
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
- re the 4465MB - you're burning too close to outer edge of discs. Set target size to 4300MB in DVD Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD-R/RW.)
- what happened there
Quote:
Existing drivers:
- your ATAPI drivers aren't listed here, reload them via this - http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 16. October 2005 @ 02:14
|
|
ShockTXB
Junior Member
|
16. October 2005 @ 07:59 |
Link to this message
|
Sorry for the trouble...I changed my target size to 4300 and I am reading the link you posted about ATAPI drivers...I think the "brand name" controller says it's a AMD-768 PCI Bus Master IDE Controller V1.43
So I found this page on AMDs site:
http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_...
after I downloaded it and tried to run it, it said, cannot install as this driver has already been installed...
I'll give Shrink a shot again now that I have changed the target size and see if that helps. If that doesn't work maybe I can just use Nero directly again and rely on that.
Thanks for the info again.
This message has been edited since posting. Last time this message was edited on 16. October 2005 @ 08:07
|
Senior Member
|
16. October 2005 @ 12:04 |
Link to this message
|
@ShockTXB,
If i read this correctly: Quote:
Ok something odd is going on...when I view the drive in My Computer I can see the CR-RW Drive (D:) and DVD-RW Drive (E:)
If I put a blank DVD in the E: drive, either the TDK or the Fuji, it switches to say CD Drive (E:) and if i double click to open it i get an error message saying the drive is not accessible.
However, if I put in a DVD it correctly shows the DVD title and (E:) drive. And I am also able to decode the DVD in DVD Shrink, so reading it is not a problem.
I also tried putting in a backup of a DVD I was able to successfully burn a little while ago with the same results, which is one of the TDK disks from the pack I've been having trouble with now.
So it seems it's reading DVD's with info already on them, but when I put either blank TDK DVD-R or a Fujifilm DVD-R it's acting like there's nothing in the drive...what's up with that?
Windows doesn't read blank media, it needs some kind of data to display correctly. When i try to access blank media in my drive by going in to my computer in windows, it shows the drive as a CD, and nothing in it (even though there is a perfectly good blank Taiyo Yuden DVD in there). I think that is normal, and not a problem. Once you have data on a disc, windows then knows what type of disc is in the drive. Now if Nero, or shrink doesn't recognize it as blank media, then you have a problem. It is usually media, or firmware out of date on drive. Sometimes the drive is shot, or worn out, or dirty lens on burner. You have plenty of free memory, and pioneers are good drives. Quote:
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
11:08:28 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD-R/RW.)
strange, it knows you have a fuji disc -R and yet it says insert empty disc? You don't have to go out and by a spindle of every brand, but Best Buy just happens to have 50 packs of Sony +R and -Rs on sale this week for 18 bucks. Those +Rs are Taiyo Yuden if MIJ.
Quote:
Session fixation error
11:08:38 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
Post another burn log, and if you have it checked in Nero, Un-Check the Disc At Once option. I get coasters most every time i attempt that, but it works fine when unchecked. I am in no big hurry to make a coaster, so i have it write to HD just to be safe.
Quote:
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x18 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
11:08:38 PM #27 CDR -1061 File Writer.cpp, Line 311
Internal target failure
Drive or media? I am not sure on that one.
Die CMC Mag!!! |
|
ShockTXB
Junior Member
|
16. October 2005 @ 12:37 |
Link to this message
|
|
sorry, but where do i uncheck disk at once? never mind...i found it in the nero advanced properties and unchecked it...i'll keep you posted if that helps...currently i have another dvd that seems to be working so far...its 14% done...and that was after setting the target down to 4300.
This message has been edited since posting. Last time this message was edited on 16. October 2005 @ 12:40
|
Moderator
|
16. October 2005 @ 12:50 |
Link to this message
|
|
good luck!. yup, keep us posted, good or bad..(or indifferent)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
ShockTXB
Junior Member
|
16. October 2005 @ 13:28 |
Link to this message
|
Ok...I was able to burn a disc onto the TDK before unchecking the Burn disc at once in Nero, and I tried another movie after unchecking that in Nero and it failed. This time I used a Fuji disk and it did the same thing I've been having trouble with before. The odd thing is in the error it mentioned the burn disk at once failure, and i double checked in Nero. i opened the burn video dvd and looked in the configuration and it has that unchecked.
here's the message from shrink
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR CD-R PX-W4824A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST380011A atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR CD-R PX-W4824A D: CDRom0
PIONEER DVD-RW DVR-105 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 20 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.10.2005
NeroAPI
5:17:09 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
5:17:09 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
5:17:09 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
5:17:09 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
5:17:09 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:17:09 PM #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
5:17:09 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:17:09 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:17:10 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
5:25:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2002527 (445:00.27, 3911MB)
5:25:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
5:25:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
5:25:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD-R/RW.)
5:25:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2002528 (2002528) = #2002528/445:0.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2002528 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
5:25:10 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4101177344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2002528 | lead-out | 1 | 0x41 | 0x00
5:25:10 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
5:25:10 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
5:25:10 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
5:25:10 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
5:25:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:25:10 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
5:25:10 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
5:25:10 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No
5:25:10 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:25:12 PM #25 Text 0 File Cdrdrv.cpp, Line 1286
17:25:12.593 - PIONEER DVD-RW DVR-105\H0 T1 : Queue again later
5:25:15 PM #26 SCSI -1061 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x01AC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x02 0xFE 0x18 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
5:25:15 PM #27 CDR -1061 File Writer.cpp, Line 311
Internal target failure
5:25:15 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:25:15 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:25:15 PM #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 767
5:25:15 PM #31 Phase 133 File APIProgress.cpp, Line 276
Writing short lead-out
5:25:15 PM #32 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04
5:25:15 PM #33 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
5:25:15 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
5:25:15 PM #35 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
5:25:15 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
5:25:15 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 10/1/2005 1:55:34 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I'm going to just try burning directly from Nero this time onto the fuji disc. if that works, that's just how im going to keep doing it from now on because for whatever reason it seems shrink is crapping out on me during the burn process. it reads and encodes fine tho. im out of ideas.
|
Moderator
|
16. October 2005 @ 13:32 |
Link to this message
|
you're sooo close to taming Nero now.....
Quote:
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD-R/RW.)
- you just gotta sort that bit now...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
ShockTXB
Junior Member
|
16. October 2005 @ 13:47 |
Link to this message
|
|
Ok more nonsense. After successfully burning a disk earlier before unchecking disc at once...i was unable to burn with nero on both TDK and Fuji. The Fuji it seems it acts like it can't tell what's in there and with the TDK I get the same power calibration crap and so forth like the errors I get in shrink. I tried puting it back on and got another coaster with the same power calibration error with a TDK disc in Nero.
So I'm staring at about 20 coasters I've ended up with over the last couple weeks and wondering why I've been able to do about 300 or so over the last year or so and now out of blue my computer is burn-retarded.
This is really just making me think the drive is dead. I don't understand why it could be the media if I've been able to do hundreds of these things in the past and now I'm on a losing streak like no other.
Any ideas? I'm totally lost.
Here's the couple of error logs I ended up with...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PLEXTOR CD-R PX-W4824A>Version: 1.03 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR CD-R PX-W4824A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST380011A atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR CD-R PX-W4824A D: CDRom0
PIONEER DVD-RW DVR-105 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 21
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.10.2005
UDF/ISO compilation
5:39:56 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
5:39:56 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
5:39:56 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:39:56 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
5:39:56 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
5:39:56 PM #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
5:39:56 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:39:56 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:39:56 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
5:39:56 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2002527 (445:00.27, 3911MB)
5:39:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
5:39:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193
5:39:56 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:39:56 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2002528 (2002528) = #2002528/445:0.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2002528 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
5:39:56 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4101177344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2002528 | lead-out | 1 | 0x41 | 0x00
5:39:56 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:39:57 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
5:39:57 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:39:57 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
5:39:57 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:39:57 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
5:39:57 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
5:39:57 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
5:39:57 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:39:58 PM #25 Text 0 File Cdrdrv.cpp, Line 1286
17:39:58.078 - PIONEER DVD-RW DVR-105\H0 T1 : Queue again later
5:40:55 PM #26 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C180000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03
5:40:55 PM #27 CDR -1106 File Writer.cpp, Line 311
Power calibration error
5:40:55 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:40:55 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:40:56 PM #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 767
5:40:56 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 10/1/2005 1:55:34 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
__________________________________________________-
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PLEXTOR CD-R PX-W4824A>Version: 1.03 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR CD-R PX-W4824A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST380011A atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR CD-R PX-W4824A D: CDRom0
PIONEER DVD-RW DVR-105 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 21
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.10.2005
UDF/ISO compilation
5:43:30 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
5:43:30 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
5:43:30 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:43:30 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
5:43:30 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
5:43:30 PM #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
5:43:30 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:43:31 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:43:31 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
5:43:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2002527 (445:00.27, 3911MB)
5:43:31 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
5:43:31 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193
5:43:31 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:43:31 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2002528 (2002528) = #2002528/445:0.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2002528 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
5:43:31 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4101177344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2002528 | lead-out | 1 | 0x41 | 0x00
5:43:31 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:43:31 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
5:43:31 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:43:31 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
5:43:31 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:43:31 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
5:43:31 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
5:43:31 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
5:43:31 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:43:32 PM #25 Text 0 File Cdrdrv.cpp, Line 1286
17:43:32.656 - PIONEER DVD-RW DVR-105\H0 T1 : Queue again later
5:44:30 PM #26 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C270000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03
5:44:30 PM #27 CDR -1106 File Writer.cpp, Line 311
Power calibration error
5:44:30 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:44:30 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:44:30 PM #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 767
5:44:30 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 10/1/2005 1:55:34 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 16. October 2005 @ 13:51
|
|
ShockTXB
Junior Member
|
16. October 2005 @ 13:56 |
Link to this message
|
|
If you think I should try those Taiyo Yuden discs, can I get those at Best Buy or something? Link? I've never heard/seen them before.
But seriously, why would I be having this problem after so long of no problems if it's a matter of discs? So now both TDK and Fuji are useless.
I'm bout ready to toss the drive to the curb and just try a new Sony dual layer external drive and see how that goes...but I do want to hear what you guys think after looking over more of those logs I posted a bit ago...it's all jibber jabber to me.
|
|
ShockTXB
Junior Member
|
16. October 2005 @ 19:40 |
Link to this message
|
|
Anyone? I might try to borrow a friend's external tomorrow and see if it works.
|
|
calhounm
Suspended due to non-functional email address
|
16. October 2005 @ 19:54 |
Link to this message
|
If you can borrow one then fine but I know discs are cheaper than drives unless you just want one. for discs DVD-R-media.html?WT.mc_id=AdWordsDVD-RMediaTaiyoYuden&WT.srch=1" class="korostus" target="_blank">http://www.supermediastore.com//taiyo-yuden-DVD-R-media.html?WT.m... or google it and find a better deal I use verbatum but that is me.
Duck tape is like the force, it has a light side, a dark side and it holds the world together.
|
|
ShockTXB
Junior Member
|
16. October 2005 @ 21:16 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 16. October 2005 @ 21:51
|
|
temj
Member
|
16. October 2005 @ 22:19 |
Link to this message
|
Quote:
"5:44:30 PM #27 CDR -1106 File Writer.cpp, Line 311
Power calibration error "
This is taken from the actual Nero website:
I get a 'Power calibration error' or 'Calibration area (almost) full' error message. Why?
Power Calibration is controlled by the recorder.
Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC).
This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.
If you receive the "Power calibration error" or "Power calibration area is (almost) full" error message, the cause will be either poor media, poor power, or a defective recorder.
Please try the following solutions:
1. Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
2. Try another brand of media.
3. Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.
4. Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
5. Send the recorder in for service.
|
|
shrimant
Suspended permanently
|
16. October 2005 @ 22:53 |
Link to this message
|
|
I would Suggest You try some other DVD burning software like Alchol 120% or ROXIO, just try majing a simple DATA DVD, it the error is same even with other Softwares...Then I truly beleive its a DRIVE ERROR, But the Pioneer ones are really trust worthy as I too have one...so at this moment I can think of a Faulty NERO installation with Wrong ASPI versions.
TRY ROXIO 7.5 with dvdregion free thats the Best.
This message has been edited since posting. Last time this message was edited on 16. October 2005 @ 22:54
|
|
calhounm
Suspended due to non-functional email address
|
16. October 2005 @ 23:42 |
Link to this message
|
though I realy dislike roxio making yourself a data disc w/nero is a good idea. You may like other software but Nero has proven itself to me. but that is my opinion. but yes those discs are good be careful if you bought the 4x's burn at 2x or close to that I never burn at over 4x because of quality
Duck tape is like the force, it has a light side, a dark side and it holds the world together.
|
|
Advertisement
|
|
|
Moderator
|
16. October 2005 @ 23:46 |
Link to this message
|
@shrimant -
Quote:
I can think of a Faulty NERO installation with Wrong ASPI versions.
- the Nero logs show no installation problems, however i'd agree a reinstall of Nero (after full uninstall and running of Nero's Clean Tools) would be worth doing. As to ASPI versions, there's no mention in the logs of ASPI other than Nero's own. Problems with ASPI can be proved via Nero's info-tool, but as i say, there's no problems i see in the logs above so in my opinion it's not ASPI.
Quote:
TRY ROXIO 7.5 with dvdregion free thats the Best.
- i only agree with trying Roxio as in to see if Roxio itself works. Roxio interferes with Nero so it would only makes things worse for Nero. It is looking like a drive problem as all the Nero tweaks have been suggested/made. The original poster would probably be better off trying something like imgburm (www.imgburn.com, temj has probably used it, i haven't got round to it yet as i love my Nero). Anyway, adding Roxio just makes things worse in my humble opinion
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 16. October 2005 @ 23:48
|
|
