i have been using dvd shrink for a couple of years now.the last time that i used it was yesterday. when i atempted to use it today i get an error message stating that shrink failed to initalize aspi device.
can someone please help me to solve this problem?
@ DPizzle:
Found this info in AD search. Hope this is helpful.
Installing a working ASPI layer
For years people have had various problems with the so called ASPI layer, which is required by many Windows CD-R software?s. This article aims to successfully install a good and working ASPI setup.
What is ASPI?
The term "ASPI" stands for Advanced SCSI Programming Interface. It?s a universal driver layer that operates in between software and the CD-R hardware. It is often referred as 'ASPI layer', ?ASPI driver?, 'ASPI Interface', which are all synonymous terms for the same thing. Windows 95/98/ME ships with a poorly implemented ASPI layer, while NT/2000/XP has no ASPI layer built in. You can check your current ASPI setup by using the ASPICHK tool that comes with the Adaptec ASPI distribution.
Many software titles install their own drivers to the operating system and therefore do not need an ASPI layer. Such software titles include CloneCD, DiscJugger, GEAR, Blindwrite and many others. On the other hand there is a large number of software that require an ASPI driver installed: Exact Audio Copy, Feurio!, BurnAtOnce, CD-R Indetifier, and so on. Nero Burning ROM comes with it?s own ASPI layer that other software can utilize too.
The symptoms of ASPI related problems
Problems that may occur if there is no proper ASPI setup:
-The CD/DVD devices are not detected by the software
-The CD/DVD devices don?t operate correctly with some program
There are also some reports on the Internet of the ASPI layer affecting the performance of a program (like audio ripping quality) but they have not been properly verified.
Solution 1: Get the latest Adaptec ASPI layer
Since the version Adaptec has been offering their drives freely for public. Their drivers should operate in any Windows version, including XP. There are however various reports of problems with these drivers. I tested Adaptec?s ASPI 4.72a2 in my computer, but programs utilizing it recognized only my SCSI connected CD drives - the IDE devices were not detected.
Download latest Adaptec ASPI
Solution 2: Get the Nero ASPI by Ahead Software
Ahead software also offers their ASPI layers free. They also promise support for USB/FireWire devices. Most programs should operate with Ahead?s ASPI, and there are many positive reports about the performance of this driver.
We on the other hand had a slight issue with Ahead ASPI. The Feurio! audio CD recording software wasn?t always able to lock the CD-R drive during the burning process.
Solution 3: ForceASPI
ForceASPI is based on older Adaptec ASPI 4.60(1021) version. This version of Adaptec ASPI refuses to install if there are no Adaptec products installed on the computer (Software or hardware), but the ForceASPI package solves this issue by inserting the drivers to the operating system with it?s own installer script.
Get ForceASPI
Adaptec ASPI doesn?t promise Windows 2000 or XP compliancy for the driver version 4.60, but public experience is that they work very well, even in Windows XP. On our test bench computer the ForceASPI was the best solution as an ASPI driver. It works flawlessly in every program tested.
Final words
I would recommend that you try these solutions in this order. If latest Adaptec ASPI works for you, or the Nero ASPI then good. If not, then go for the ForceASPI as the last solution.
