|
|
|
DVD shrink burning problems
|
|
|
harrysk
Newbie
|
12. November 2005 @ 07:56 |
Link to this message
|
|
I've been burning dvd's with dvd shrink for quite some time but now i start to get the following error message:
---------------------------------------------------------------------
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 6.3.1.4
Installed in: D:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 2
Recorder: <SONY DVD RW DRU-510A> Version: 1.0d - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-510A CDRom0
SONY CD-RW CRX300E CDRom1
Generic DVD-ROM G: CDRom2
Generic DVD-ROM I: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 382MB (391760kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.11.2005
NeroAPI
16:09:32 #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
16:09:32 #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
16:09:32 #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
16:09:32 #4 SPTI -1065 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 20
Buffer x01ff8a00: Len x6
16:09:32 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
16:09:32 #6 Text 0 File Reader.cpp, Line 124
Reader running
16:09:32 #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-510A running
16:09:32 #8 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
16:09:33 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
16:09:33 #10 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
16:09:33 #11 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
16:09:33 #12 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2247007 (499:20.07, 4388MB)
16:09:33 #13 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO
16:09:33 #14 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
16:09:33 #15 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:09:33 #16 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2247008 (2247008) = #2247008/499:20.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2247008 blocks [E: SONY DVD RW DRU-510A]
--------------------------------------------------------------
16:09:33 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4601872384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2247008 | lead-out | 1 | 0x41 | 0x00
16:09:33 #18 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
16:09:33 #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
16:09:33 #20 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
16:09:33 #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
16:09:33 #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5,540 KB/s)
16:09:33 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:09:34 #24 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
16:09:34 #25 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON
16:09:34 #26 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
16:09:34 #27 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:09:45 #28 Text 0 File Cdrdrv.cpp, Line 1197
16:09:45.281 - E: SONY DVD RW DRU-510A : Queue again later
16:10:30 #29 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 08 C0 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x00b70000: Len x10000
0x00 00 01 BA 44 01 25 52 4D D7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 01 7E 14 41 00 15 3D AC 06
0xB7 78 08 0B A0 F0 5D 0E 86 DE 0E 34 1C 24 FE E9
16:13:25 #30 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(21) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 08 C0 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x043a0200: Len x10000
0x00 00 01 BA 44 01 25 52 4D D7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 01 7E 14 41 00 15 3D AC 06
0xB7 78 08 0B A0 F0 5D 0E 86 DE 0E 34 1C 24 FE E9
16:13:25 #31 Text 0 File MMC.cpp, Line 19278
Writer-Buffer for E: SONY DVD RW DRU-510A reduced to 32768Bytes
16:15:02 #32 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(21) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 08 C0 00 00 10 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x03b15200: Len x8000
0x00 00 01 BA 44 01 25 52 4D D7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 01 7E 14 41 00 15 3D AC 06
0xB7 78 08 0B A0 F0 5D 0E 86 DE 0E 34 1C 24 FE E9
16:15:02 #33 CDR -500 File Writer.cpp, Line 302
SCSI command aborted
E: SONY DVD RW DRU-510A
16:15:02 #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:15:02 #35 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
16:15:02 #36 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2239
16:24:29 #37 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(21) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x01ffec00: Len x48
16:24:30 #38 CDR -500 File WriterStatus.cpp, Line 167
SCSI command aborted
E: SONY DVD RW DRU-510A
16:24:30 #39 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
16:29:20 #40 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(21) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x01ffec00: Len x48
16:29:21 #41 CDR -500 File WriterStatus.cpp, Line 172
SCSI command aborted
E: SONY DVD RW DRU-510A
16:29:21 #42 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession
16:30:58 #43 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 4x (5,540 KB/s)
16:30:58 #44 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
16:30:58 #45 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
16:30:58 #46 SPTI -500 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 15/08/2005 21:00:57 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
---------------------------------------------------------------------
Could anyone help me out here, its happened about 7 times now.
oh and when i try to play the dvds they actually work but the last 3 have crashed quite early in the burning process (2%) etc. The rest crashed about 99% (these ones work).
The one that i tried to burn today crashed and the DVD Drive has disapperead from My Computer and the eject button is not working.
Any help?
|
|
Advertisement
|
|
|
|
Moderator
1 product review
|
12. November 2005 @ 08:32 |
Link to this message
|
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
Your PC is not recognizing your drive.
Quote:
CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
DMA should be on for all of these drives. Go into Device Manager and enable DMA on all drives.
Quote:
Recorder: <SONY DVD RW DRU-510A> Version: 1.0d
Your firmware is 2 versions behind. You can update it here: http://forum.rpc1.org/dl_result.php?kaj=1&isces
Quote:
Physical memory : 1023MB (1048048kB)
Free physical memory: 382MB (391760kB)
Memory in use : 62 %
A gig of memory is good but your using a bit too much of it...close down any unneeded progs to free up some before encoding and burning.
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2247007 (499:20.07, 4388MB)
You are burning to close to the edge. Change your target size to 4300.
Quote:
Disc Manufacturer: FUJIFI - LM03
Fuji is generally good if made in Japan.
These are good suggestions to get you started burning again, but others will be by with more suggestions as I have probably overlooked something.
|
Senior Member
|
12. November 2005 @ 09:38 |
Link to this message
|
Quote:
16:09:33 #14 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
I don't think those are MIJ cause MIJ Fujis are Taiyo Yuden so they should have TY code..
Quote:
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
Here is an alkohol written guide on how to fix DMA in case you're unsure:
((To enable DMA back ON by "uninstalling" it's driver ?for Win XP users?))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on + sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of "IDE ATA/ATAPI Controllers"
(B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel")
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps.
Quote:
16:09:33 #12 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2247007 (499:20.07, 4388MB)
Like LOCOENG said you are writing too close to the edge, here is how you fix it in case you don't know:
In Shrink go to Edit>Preference>under the first tab scroll down in box until you reach 'custom'>then in box beside it type in 4300.
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
This is fine if you have an external drive, if you don't then you have a problem.
|
|
harrysk
Newbie
|
12. November 2005 @ 11:39 |
Link to this message
|
|
Thanks for the replies.
"In Shrink go to Edit>Preference>under the first tab scroll down in box until you reach 'custom'>then in box beside it type in 4300."
Do i have to do this as i have burned quite a few dvd's without changing this. I have used your advice and changed it though.
Also what can i do about this problem that you have stated, because i don't a have an external drive.
Quote:
--------------------------------------------------------------------------------
Bus Type : default (0) -> ATAPI, detected: ?
--------------------------------------------------------------------------------
"This is fine if you have an external drive, if you don't then you have a problem. "
Anyway i've done everything else and i'll give an update once i try another burn.
|
Senior Member
|
12. November 2005 @ 14:34 |
Link to this message
|
Quote:
Do i have to do this as i have burned quite a few dvd's without changing this. I have used your advice and changed it though.
You don't have to do it in the same sense you don't have to go to a docter when you sick. You will get better quality burns if you do and will probably last longer.
The atapi thing:
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
I think you've got your jumpers installed incorrectly meaning you probably have to drives on 'master', usually the DVD burner should be the only thing on master. Are you sure you intalled your drives correctly? You can't just take it out of the box b/c they have the jumpers on a default that isn't 'master' and your first drive, the one that came w/ the comp, will usually be installed as the master so you have to change that as well.
|
|
harrysk
Newbie
|
13. November 2005 @ 01:40 |
Link to this message
|
I checked and the DVD-RW Drive is on Master and the CD-RW Drive is on Slave. I tried a burn after i did everything mentioned above but another fail.
Here is the output if it helps:
---------------------------------------------------------------------
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 6.3.1.4
Installed in: D:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 2
Recorder: <SONY DVD RW DRU-510A> Version: 1.1a - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-510A E: CDRom0
SONY CD-RW CRX300E F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 457MB (468300kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.11.2005
NeroAPI
11:02:41 #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
11:02:41 #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
11:02:41 #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
11:02:41 #4 SPTI -1065 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 20
Buffer x02057a00: Len x6
11:02:42 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
11:02:42 #6 Text 0 File Reader.cpp, Line 124
Reader running
11:02:42 #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-510A running
11:02:42 #8 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:02:42 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:02:42 #10 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:02:42 #11 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
11:02:42 #12 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202143 (489:21.68, 4301MB)
11:02:42 #13 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO
11:02:42 #14 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
11:02:42 #15 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:02:42 #16 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [E: SONY DVD RW DRU-510A]
--------------------------------------------------------------
11:02:42 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202144 | lead-out | 1 | 0x41 | 0x00
11:02:43 #18 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:02:43 #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
11:02:43 #20 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
11:02:43 #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
11:02:43 #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5,540 KB/s)
11:02:43 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:02:43 #24 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
11:02:43 #25 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON
11:02:43 #26 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
11:02:43 #27 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:02:50 #28 Text 0 File Cdrdrv.cpp, Line 1197
11:02:50.859 - E: SONY DVD RW DRU-510A : Queue again later
11:03:38 #29 SPTI -1106 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 08 C0 00 00 20 00 00 00
Sense Area: 0xF1 00 03 FF FD 00 00 12 00 00 00 00 73 03
Buffer x00b70000: Len x10000
0x00 00 01 BA 44 01 27 FB 74 D7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 C0 28 2B 50 A2 5A B8 5E AA
0x81 C1 50 A2 C0 F4 F9 46 D5 14 49 58 D1 BD A3 25
11:03:38 #30 CDR -1106 File Writer.cpp, Line 302
Power calibration error
E: SONY DVD RW DRU-510A
11:03:38 #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:03:38 #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:03:39 #33 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2239
11:03:39 #34 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 4x (5,540 KB/s)
11:03:39 #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:03:39 #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 15/08/2005 21:00:57 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
---------------------------------------------------------------------
My coaster collection is getting big.
|
AfterDawn Addict
|
13. November 2005 @ 05:07 |
Link to this message
|
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
All the Nero 7 logs are coming through this way you can check other posts and they read the same. My log shows this also whether I am using internal/external drive. It is something in the program.
|
Senior Member
|
13. November 2005 @ 08:32 |
Link to this message
|
Oh i'm sorry I didn't know, I don't have Nero 7 and I guess I didn't recognize it, haven't seen '7' all that much.
Do you think they'll change it? Is it a mistake that they'll fix or is it just like that?
|
AfterDawn Addict
|
13. November 2005 @ 11:47 |
Link to this message
|
@GlueEater
As to the Nero7 lack of Atapi, I thought is was my computer and then started checking the 7 logs being posted and realized it was all of them. I even reformated thinking there was something wrong. Just posted to creaky about this, so now we will both be looking out to see what is going on with the new Nero.
|
Moderator
1 product review
|
13. November 2005 @ 15:37 |
Link to this message
|
@arnie
Have you had successful burns with Nero 7? I have but I've never looked at the log to see if mine says the same.
@harrysk
Have you tried to burn with DVD Decrypter instead of Nero? If so, any luck?
|
AfterDawn Addict
|
13. November 2005 @ 16:44 |
Link to this message
|
|
@LocoEng
Yes my burns with 7 have all been successful. However just went back and put in Nero 6 to see what it would show, and it comes up
Bus Type : default (0) -> ATAPI, detected: ATAPI
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
With 7 it showed ATAPI, detected: ?
And it did not show atapi.sys drivers
Something is definitely different. However if you are using Recode it will not show the atapi.sys drivers in the Existing Drivers at the end. Comes up looking like 7
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
This message has been edited since posting. Last time this message was edited on 13. November 2005 @ 16:47
|
|
harrysk
Newbie
|
16. November 2005 @ 06:30 |
Link to this message
|
I will try to burn with DVD Decrypter but i do not want to waste any more dvds so i've placed an order for some DVD-RWs - when they arrive i'll have a try.
I have also noticed something else, the first log that i put in this post had the following error:
---------------------------------------------------------------------
"Could not perform end of Disc-at-once"
&
"Could not perform EndSession"
---------------------------------------------------------------------
But the second log that i posted after making the changes you stated had the error:
---------------------------------------------------------------------
"Power calibration error"
---------------------------------------------------------------------
What does this mean???
|
AfterDawn Addict
|
16. November 2005 @ 08:02 |
Link to this message
|
Power Calibration Error in Nero
Power Calibration Error
Error code:
Quote:
4:18:59 AM #25 CDR -1106 File Writer.cpp, Line 301
Power calibration error
4:18:59 AM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:18:59 AM #27 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
4:18:59 AM #28 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 31
4:18:59 AM #29 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 4x (5,540 KB/s)
Cause:
Power Calibration is controlled by the recorder.
Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC).
This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.
If you receive the "Power calibration error" or "Power calibration area is (amost) full" error message, the cause will be either poor media, poor power, or a defective recorder.
Solution:
This error can be caused in conjunction with some (cheap) medias, try to burn them alternative with lower speed or switch to another brand of discs.
If you cant solve this error by using recommend medias, pls. try out these steps , if they fail, drive is defect, you should claim it immediate to your dealer.
Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
It is recommend that device should be connected to secondary IDE port as master. Dont use fast ATA 133/166/233 and 266, unit should connected with delivered UDMA-2 cable(40pin)
Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
First deinstall all your burnersoftware(s), also clean registry*.
(*it is recommend to use cleaning tools from NERO:
General Clean Tool http://www.nero.com/en/631940828445001.html
Registry Checker and DriverClean tool http://www.nero.com/en/631938356417810.html
InCD Clean Tool http://www.nero.com/en/631938356212815.html
Nero 5 Clean Toolnero clean tool http://www.nero.com/en/631938364095950.html )
Install actual mainboard driver (Busmaster/ Chipset driver). Contact in this case manufacturer of your mainboard. For test you can also try to burn without DMA mode, ( only possible under Windows XP and Windows 2000 ) in the device manager - "IDE ATA/ ATAPI controllers", you can switch from DMA to PIO mode. Pls. notice: If problems caused by NFORCE Chipset drivers, you should better reinstall MS standard IDE drivers.
More than one installed burnersoftwares can cause problems (**some softwares replace ASPI driver by their own! ) so install only one, especially actual trial release of NERO [ http://www.nero.com ] and check burn project again.
**If needed, install actual ASPI Driver (contact manufacturer of your burnersoftware e.g. www.nero.com )
Use our recommended medias , with other medias there`s no guarantee, they will be written correctly and with maximum speed.
For Problems with InCD, pls. contact Nero support. Be informed device works only with InCD, Mt.Rainier (e.g. directCD) is not supported.
You can deactivate for test (only with Windows XP) "IMAPI CD-Burning COM Service", go to menu "start" > "settings" > "administration" > "services", search "IMAPI CD-Burning COM Service", rightclick and deactivate "starttyp".
--------------------------------------------------------------------------------
Last edited by cynthia : 21 Jan 2005 at 03:30 PM.
From Digital Digest
http://forum.digital-digest.com/showthread.php?s=&threadid=45942
This message has been edited since posting. Last time this message was edited on 16. November 2005 @ 08:04
|
|
harrysk
Newbie
|
19. November 2005 @ 05:19 |
Link to this message
|
I tried another burn but with a DVD-RW (Imation DVD+RW 4x) and it worked so i tried it with another DVD (Datawrite DVD-R 8x - Printable Surface) but i crashed again.
Then i tried another type of media that i had lying around (Datawrite DVD-R 8x - Yellow Top) and it worked perfectly so i think it was the media.
But the funny thing is that i've been using these Datawrites for ages (burned about 70 discs) and no crashes and they are all from the same batch cause i bought 8 packs (25 in each) and it started to crash about half way through the 3rd pack?
I'll open another pack and see if it was just that pack that wa defective.
|
Moderator
|
19. November 2005 @ 09:01 |
Link to this message
|
Datawrite use some truly appalling disc manufacturers... they're yet another company whose products are a pick 'n mix of quality, snippet from here - http://forums.afterdawn.com/thread_view.cfm/202427 -
Quote:
As for Datawrite, this is not a complete or up to date list, but there's not a great deal of quality to choose from here -
Datawrite Classic Grey DVD-R 4x (PRODISC S03)
Datawrite Classic Grey DVD-R 8x (FUJIFILM03)
Datawrite Classic Grey DVD-R 8x (Prodisc F01)
Datawrite Classic Red DVD-R 4x (PRINCO......)
Datawrite Classic Titanium DVD+R 8x (CMC MAG. AE1)
Datawrite Classic Yellow DVD+R 8x (MCC 003)
Datawrite Classic Yellow DVD+R 8x (PRODISC R03) Rev03
Datawrite Classic Yellow DVD-R 1x (PRINCO......)
Datawrite Classic Yellow DVD-R 4x (PRINCO......)
Datawrite DVD+R 2.4X (PRODISC R01)
Datawrite DVD+RW ?x (PRODISC W01)
Datawrite DVD-R 4x (RITEKG04....)
Datawrite DVD-R 8x Printable (CMC MAG AE1)
Datawrite DVD-RW 2x (PRINCO......)
Datawrite Red (V2) DVD-R 4x (AN31........)
Datawrite Red (V2) DVD-R 4x (INFOSMART01.)
- the media codes are in brackets, a mixed bag of quality. Plus i've come across some 'MCC' coded Datawrites that were appalling.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
dhaynes
Newbie
|
21. November 2005 @ 12:00 |
Link to this message
|
I've also been unsuccessful in burning with the DVD Shrink software. In fact, I cannot back up an existing DVD with Nero either; though I've successfully burned other sorts of data. I'm unsure whether the problem is with the computer, software, burner, or media. I'm using Memorex DVDR+ with an HP Media Center ~2004 model. I've been concerned in the past that the burner is faulty; it seems to become unresponsive at times for no reason. However, this weekend, determined to successful back up a dvd for the first time, I destroyed about 10 blank discs with different combinations of Nero, DVD Shrink, and DVD Decrypter. I can succuessfully analyze and shrink a DVD, but the burn is never successful; even at speeds as low as 2.4X. I'm wondering what it is about that type of data that my burner won't accept? It either burns and returnds a data verification error, or never finishes burning - I've noticed some of the discs look as though the laser faded in and out, leaving an uneven looking burn. I have successfully burned other data though, which makes me think the problem might not be the burner. Any suggestions?
|
Moderator
1 product review
|
21. November 2005 @ 13:44 |
Link to this message
|
@dhaynes
Make sure that your firmware is up to date for your burner. You can look here: http://forum.rpc1.org/dl_all.php
You can find your burner's model# and firmware version in DVD Decrypter, by going to Tools->Drive->Capabities.
Also make sure that when burning you are not multi-tasking. Close all unneccessary progs.
This message has been edited since posting. Last time this message was edited on 21. November 2005 @ 13:45
|
|
Advertisement
|
|
|
AfterDawn Addict
|
21. November 2005 @ 16:11 |
Link to this message
|
Quote:
I'm using Memorex DVDR+
Try another brand of media, Memorex are not noted for giving consistent burns. Better media is Verbatim, Sony, Fuji (Made in Japan) and Maxell.
|
|
