|
|
|
problems with dvd shrink
|
|
|
jamie1972
Newbie
|
31. January 2006 @ 02:08 |
Link to this message
|
|
could someone help me with a problem with dvd shrink? i tried making a back up copy of flight plan and got an error. i am using dyson 8x. i am using dvd43 for decrypt and the nero software that came with my computer. i have tried burning at 2x and 4x and have mad more coasters than back ups the last 2 weeks. please be easy on me as i am new to this.the following is the error that i received:
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 10:18:06 PM
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: GA02 - HA 0 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8483B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : HDS722516VLSA80 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552 E: CDRom0
HL-DT-ST CD-ROM GCR-8483 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513792kB)
Free physical memory: 190MB (194700kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.1.2006
NeroAPI
6:38:46 AM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
6:38:46 AM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
6:38:46 AM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
6:38:46 AM #4 Text 0 File Reader.cpp, Line 118
Reader running
6:38:46 AM #5 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H552B running
6:38:46 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:38:46 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:38:46 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:38:46 AM #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media
6:38:46 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2141039 (475:47.14, 4181MB)
6:38:46 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO
6:38:46 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
6:38:46 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:38:46 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2141040 (2141040) = #2141040/475:47.15
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2141040 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
6:38:46 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4384849920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2141040 | lead-out | 1 | 0x00 | 0x41
6:38:46 AM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
6:38:46 AM #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
6:38:46 AM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
6:38:46 AM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)
6:38:46 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:38:46 AM #21 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
6:38:46 AM #22 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
6:38:46 AM #23 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
6:38:46 AM #24 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:38:54 AM #25 Text 0 File Cdrdrv.cpp, Line 1294
06:38:54.562 - TSSTcorp CD/DVDW TS-H552B\H0 T0 : Queue again later
6:48:52 AM #26 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03830000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x08 0xFB 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
6:48:52 AM #27 CDR -1135 File Writer.cpp, Line 304
Write error
6:48:52 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:48:52 AM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
6:48:52 AM #30 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 588735
6:48:52 AM #31 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2x (2,770 KB/s)
6:48:52 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
6:48:52 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 10:07:32 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thank you for your help.
This message has been edited since posting. Last time this message was edited on 31. January 2006 @ 02:47
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
31. January 2006 @ 02:33 |
Link to this message
|
Firstly, edit your post and remove the serial number so that it does not get pilfered. It is at the top and begins with 1A20...
Quote:
Nero API version: 6.3.1.17
Your nero needs to be updated as this version is ancient. Get it here:
http://ww2.nero.com/nero6/enu/nero-up.phpQuote:
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: GA02
The latest firmware for your drive is GA04 and is available here: http://forum.rpc1.org/dl_result.php?kaj=1&isces
Quote:
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8483B atapi Port 0 ID 1 DMA: Off
You need to enable your DMA as you are in PIO mode which is real slow. You can follow the instructions located here:
http://home.comcast.net/~bbmayo/checking%20DMA.pdf
Quote:
Physical memory : 501MB (513792kB)
Free physical memory: 190MB (194700kB)
Memory in use : 62 %
You should try to free up some memory, no multi-tasking during the burn process.
Quote:
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
The recorder does not like the media being used. The firmware update should help with this. I would recommend using Taiyo Yuden, Verbatim, Maxell, and Sony Media (made in Japan for the last two). Your Riteks should be okay too.
These are high quality medias. Do not use memorex unless you enjoy coasters.
Get these items corrected and give it another go. 4x burn speed will be okay.
Cheers.
This message has been edited since posting. Last time this message was edited on 31. January 2006 @ 03:49
|
AfterDawn Addict
|
31. January 2006 @ 03:18 |
Link to this message
|
Quote:
Disc Manufacturer: RITEKG - 05
Not bad media, however some people do have problems with these. Try the updates and see if this solves the problem.
|
|
jamie1972
Newbie
|
31. January 2006 @ 03:37 |
Link to this message
|
|
THANK YOU FOR THE HELP. I AM MAKING THESE CORRECTIONS AND WILL LET YOU KNOW HOW IT TURNS OUT.
I WENT TO CHECK TO SEE IF MY DRIVE IS IN DMA MODE AND NOTICED THAT I HAVE 2 PRIMARY IDE CHANNELS.
THE FIRST LOOKED FINE BUT THE SECOND READ IN IPO MODE. I CHACNGE THE SECOND "PRIMARY" TO DMA IF APPLICABLE BUT THE " CURRENT TRANSFER MODE LINE DID NOT CHANGE.
I ASSUME THIS WILL CHANGE WHEN I RESTART MY COMPUTER.
THANK YOU.
|
AfterDawn Addict
|
31. January 2006 @ 03:50 |
Link to this message
|
|
Yes, it should when you reboot. Turn off the caps lock. It's against the forum rules as it makes folks think you are shouting at them.
Cheers.
|
Moderator
1 product review
|
31. January 2006 @ 03:59 |
Link to this message
|
|
Mornin ruger...check your PM
|
AfterDawn Addict
|
31. January 2006 @ 05:44 |
Link to this message
|
|
Did, back at ya.
|
|
jamie1972
Newbie
|
31. January 2006 @ 10:49 |
Link to this message
|
Thanks Ruger:
Flight PLan worked perfect. It seemed to encode a little slower than before. i put in a bad blank disc so it would cancel to check to see if I updated everything correctly. i noticed that I was still GA02. then I followed the install directions again for that. I included the error message for a question I had. I think that I got all the updates correctly. before i reinstalled the ga04 and restarted the computer, I noticed that the DMA for cd/dvdw ts-h552b still said off. but after the restart the error message below states all are on.
Last question:
Now that my firmware is GA04 and the drivers DMA are all on, will my encode time be lower. flight plan took 45 minutes to encode and cold creek manor took 1 1/4 hours to encode. both were movie only w/o subtitles and english only. compression a was 100% and b was 95%.
Thank you for all the help.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: GA04 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8483B atapi Port 0 ID 1 DMA: On
DiskPeripheral : HDS722516VLSA80 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552B E: CDRom3
HL-DT-ST CD-ROM GCR-8483B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513792kB)
Free physical memory: 234MB (240464kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.1.2006
NeroAPI
3:38:22 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
3:38:22 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
3:38:22 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
3:38:26 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
3:38:26 PM #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running
3:38:26 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:38:26 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:38:26 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:38:26 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
3:39:15 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285887 (507:58.37, 4464MB)
3:39:15 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
3:39:15 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
3:39:15 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
3:39:15 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2285888 (2285888) = #2285888/507:58.38
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285888 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
3:39:15 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681498624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285888 | lead-out | 1 | 0x41 | 0x00
3:39:16 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
3:39:16 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
3:39:16 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
3:39:16 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
3:39:16 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:39:16 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
3:39:16 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Super Link -> ON
3:39:16 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
3:39:16 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:39:27 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
15:39:27.687 - TSSTcorp CD/DVDW TS-H552B\H0 T0 : Queue again later
3:43:46 PM #26 SCSI -1064 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00D70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0A 0x66 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x00
3:43:46 PM #27 CDR -1064 File Writer.cpp, Line 311
Invalid block address
3:43:46 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:43:46 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:43:46 PM #30 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 681695
3:43:46 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
3:43:46 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
3:43:46 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 10:07:32 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
AfterDawn Addict
|
31. January 2006 @ 11:07 |
Link to this message
|
Quote:
Now that my firmware is GA04 and the drivers DMA are all on, will my encode time be lower.
That depends on your system. Certainly having DMA enabled will improve performance, but a lot depends on your processor speed and the amount of ram that you have. Looks to me like you have 512mb ram and your system uses approximately half of that to run the system. That leaves you with about 256mb to do your processing with. I would upgrade my ram to 1 gig as soon as possible to improve performance.
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285887 (507:58.37, 4464MB)
I would set my target size to 4300 as this indicates that you are burning too close to the edge of the media. When you burn too close to the edge you will have pauses and pixelations in the burn copy which can be annoying.
Cheers.
|
|
