|
Tutorial: How to FTP in to your Xbox
|
|
Senior Member
|
15. August 2005 @ 05:17 |
Link to this message
|
|
Everthing on your D:\ drive will be your game,just pull everything from that partition to your PC harddrive somewhere on your desktop(if you use this method though you will have to build your iso with the folder you extracted everything to with a XISO program to build the folder that contains all the game files into a XISO)or you can use something easier like Quix 1.0 or Craxtion 4.1 I think that is the latest program.You might have to manually configure them to pull the files from the D:\ drive and set your connection to work with them.I had to do that when I used Quix it isn't hard though and once you get it configured it works like a charm,but what it does is make a XISO without the added steps so you can burn your games on a disc after it finishes.I hope I helped you out,the most confusing part is setting up a connection though like PimpDawg mentioned.Good luck and glad to help you out.
...........................:SiG cReAtEd By Phantom69:............................ |
|
Advertisement
|
 |
|
|
|
tapsta
Junior Member
|
15. August 2005 @ 07:06 |
Link to this message
|
|
I was thinking about this for sometime now. I can't go on Live if i change my MS dashboard. But is it possible to install an evox dashboard, copy your games over, then reinstall the original ms dashboard so you can still play on live afterwards?
|
Senior Member
|
15. August 2005 @ 09:27 |
Link to this message
|
|
Notta my friend,it doesn't work like that because your original M$ Default Dash will not let you notice the games or explore/launch the games off your HDD without Evox or even on disc.Your other dashboard Evox,Avaulanch etc... will give you different possibilities.The M$ default Dashboard doesn't really let you do anything besides play online and play originals.
...........................:SiG cReAtEd By Phantom69:............................
|
|
shawty
Junior Member
|
16. August 2005 @ 11:33 |
Link to this message
|
|
pimpdawg please help
on my evolutionx dashboard, i only havethe options "games and aplications, execute game or dvd, ms dashboard, restart, power off and system utilities" and none of them have the option settings, and system utilities is just made for screen savers.
please help
www.thegtaplace.com go ahead and change your cheap cars for luxurious cars like the 1.5 million Bugatti Veyron!!!
|
|
Quadratic
Senior Member
|
16. August 2005 @ 15:28 |
Link to this message
|
Quote:
on my evolutionx dashboard, i only havethe options "games and aplications, execute game or dvd, ms dashboard, restart, power off and system utilities" and none of them have the option settings, and system utilities is just made for screen savers.
You need to go into system utilities.
Proud Member of Afterdawn and http://www.teammodders.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Want to know how to make backups? Check here:http://forums.afterdawn.com/thread_view.cfm/141037 |
|
modder_x
Suspended due to non-functional email address
|
16. August 2005 @ 16:12 |
Link to this message
|
|
i ftp my xbox fine but y is it when i try to find it on the xbox i cant
<<<<<JON>>>>>
|
|
shawty
Junior Member
|
17. August 2005 @ 22:46 |
Link to this message
|
|
please quadratic
on system utilitys, the only sub menu is screensavers, believe me, there is no settings sub or anything, plz help
thx shawty
www.thegtaplace.com go ahead and change your cheap cars for luxurious cars like the 1.5 million Bugatti Veyron!!!
|
|
Quadratic
Senior Member
|
18. August 2005 @ 07:25 |
Link to this message
|
|
Your evox.ini should look like this:
FTP=YES
SetupNetwork=YES
[Misc]
AutoLaunchGames = No
AutoLaunchDVD = YES
DVDPlayer = "f:\apps\dvdx - DVD Player\default.xbe"
AutoLaunchAudio = No
#AudioPlayer = "c:\evoxdash.xbe"
MSDashBoard = "c:\msxboxdash.xbe"
UseFDrive = Yes
SkinName = matrix modded
IGR = No
UseItems = No
ScreenSaver = 5
#SkinName = Gears
Fahrenheit = Yes
ShadeLevel = 56
[IGR]
Start_Button = Yes
Back_Button = Yes
L_Trig = Yes
R_Trig = Yes
White_Button = No
Black_Button = No
A_Button = No
B_Button = No
X_Button = No
Y_Button = No
[Network]
SetupNetwork = Yes
StaticIP = No
Ip = 192.168.0.103
Subnetmask = 255.255.255.0
Defaultgateway = 192.168.0.1
DNS1 = 0.0.0.0
DNS2 = 0.0.0.0
SkipIfNoLink = No
SetupDelay = 10
[Clock]
JumpToMsDash = No
JumpIfNoLink = Yes
Use24 = Yes
SwapDate = No
SNTP_Server = 216.244.192.3
[FTP]
Enable = Yes
Password = xbox
IGR = No
[Telnet]
Enable = Yes
[RDTOOLS]
Enable = Yes
Name = xbox
IGR = No
Proud Member of Afterdawn and http://www.teammodders.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Want to know how to make backups? Check here:http://forums.afterdawn.com/thread_view.cfm/141037 |
|
PAUL0617
Member
|
18. August 2005 @ 10:16 |
Link to this message
|
|
In your custom Xbox dash (i.e. Evolution X, Avalaunch, Unleash X etc.), make sure your settings are configured for STATIC
how do you do this?
|
|
PimpDawg
Suspended due to non-functional email address
|
18. August 2005 @ 14:50 |
Link to this message
|
|
Paul,
Just copy and paste what Quad wrote above in the evox.ini file. Overwrite the other contents that are there in place of what is below.
FTP=YES
SetupNetwork=YES
[Misc]
AutoLaunchGames = No
AutoLaunchDVD = YES
DVDPlayer = "f:\apps\dvdx - DVD Player\default.xbe"
AutoLaunchAudio = No
#AudioPlayer = "c:\evoxdash.xbe"
MSDashBoard = "c:\msxboxdash.xbe"
UseFDrive = Yes
SkinName = matrix modded
IGR = No
UseItems = No
ScreenSaver = 5
#SkinName = Gears
Fahrenheit = Yes
ShadeLevel = 56
[IGR]
Start_Button = Yes
Back_Button = Yes
L_Trig = Yes
R_Trig = Yes
White_Button = No
Black_Button = No
A_Button = No
B_Button = No
X_Button = No
Y_Button = No
[Network]
SetupNetwork = Yes
StaticIP = No
Ip = 192.168.0.103
Subnetmask = 255.255.255.0
Defaultgateway = 192.168.0.1
DNS1 = 0.0.0.0
DNS2 = 0.0.0.0
SkipIfNoLink = No
SetupDelay = 10
[Clock]
JumpToMsDash = No
JumpIfNoLink = Yes
Use24 = Yes
SwapDate = No
SNTP_Server = 216.244.192.3
[FTP]
Enable = Yes
Password = xbox
IGR = No
[Telnet]
Enable = Yes
[RDTOOLS]
Enable = Yes
Name = xbox
IGR = No
Proud member of the Afterdawn forums! |
|
BJet1
Suspended permanently
|
20. August 2005 @ 18:59 |
Link to this message
|
|
three questions:
1. do you have to have a custome dash before you can FTP?
2. afetr you do have custom dash installed you can never play live again?
3.after dash is insatlled you cant have auto-game sart up? so how do the games start?
If at first you do succeed...try not to look astonished.:/
-BJet1-
|
|
mickmok
Newbie
|
20. August 2005 @ 19:23 |
Link to this message
|
|
Hey, Iv been having trouble connecting the xbox up for FTP also. I did get it working a while ago with a tutorial but since then the site had been shut down. So I assume I have the correct crossover cable as I did get it working once. But I have tried several other tutorials and none will work. Flash FXP will just sit there trying to connect, will either time out or refuse connection. My comps IP is 192.168.1.3 I have set my xbox to 192.168.0.3 and everything else is how is explained. On my comp I set up the IP as 192.168.0.2 i think? subnet mask as normal. However still wont connect.
|
|
PAUL0617
Member
|
20. August 2005 @ 19:25 |
Link to this message
|
|
how do you put the evox .ini file onto a disk? i am going crazy
|
|
BUDSMKER
Junior Member
|
18. September 2005 @ 14:15 |
Link to this message
|
|
Will an ethernet cable connecting from my router to my xbox work?
...
|
|
PimpDawg
Suspended due to non-functional email address
|
18. September 2005 @ 14:22 |
Link to this message
|
Proud member of the Afterdawn forums!
|
|
BUDSMKER
Junior Member
|
18. September 2005 @ 14:33 |
Link to this message
|
|
Ugh I meant instead of cross cables for the Ftp thing, I meant can I use an ethernet cable connecting from my router to my xbox for the Ftp thing?
...
This message has been edited since posting. Last time this message was edited on 18. September 2005 @ 14:35
|
|
PimpDawg
Suspended due to non-functional email address
|
18. September 2005 @ 14:36 |
Link to this message
|
|
That's a yes, it will work.
Did you check the link I gave you above? I'm guessing not, because right at the top it tells you what you need:
Required Hardware for a Router Connection
3 Ethernet Cables with RJ-45 Connectors
NAT Cable/DSL Router
Ethernet NIC for the PC
Proud member of the Afterdawn forums!
|
|
BUDSMKER
Junior Member
|
18. September 2005 @ 14:41 |
Link to this message
|
|
Oh, but I used only 1 ethernet cable to connect to live and I could connect to live.
...
This message has been edited since posting. Last time this message was edited on 18. September 2005 @ 14:42
|
|
PimpDawg
Suspended due to non-functional email address
|
18. September 2005 @ 15:05 |
Link to this message
|
|
Yes, you use 1 cable to connect your Xbox to your router, but you need two more cables, one to hook up from your router to PC, and one to hook up your router to your modem.
If you were going off of a modem only, and did not use a router, then you would just need 1 standard straight through ethernet cable.
Proud member of the Afterdawn forums!
|
|
tapsta
Junior Member
|
18. September 2005 @ 18:21 |
Link to this message
|
|
I have been thinking about something else. I have the evox chip installed but still am using the M$ dashboard...now if I install the evox dashboard, copy my games onto dvd's then reinstall the M$ dashboard, everything should be alright...i think.
if this is possible, where could i get a copy of the M$ dashboard so i could reinstall it after i finished putting my games onto dvd?
|
|
PimpDawg
Suspended due to non-functional email address
|
18. September 2005 @ 21:09 |
Link to this message
|
tapsta, you got a few things mixed up I think...
For one, you do not need to get rid of your M$ dash, you can have your EvoX and M$ dash on your Xbox HD at the same time.
So, what chip do you have for real? Because there is no such thing as an EvoX modchip.
I would just suggest getting slayers from #xbins, and then burn the Slayer XISO you get to a quality DVD-R, pop it in your Xbox, and go to the option "Install EvoX on C: and Apps on E:" Reboot your Xbox, and you should have the EvoX dashboard on there. You can then FTP to your Xbox.
Here is a guide on how to access #xbins if you do not know how, http://teammodders.com/viewtopic.php?t=96
Proud member of the Afterdawn forums!
|
|
tapsta
Junior Member
|
18. September 2005 @ 21:17 |
Link to this message
|
|
ummm i guess i do have a few things mixed up. as for which chip i have...i have no clue. a friend of a friend did it for me and all i do see when i load up my xbox is 'evox' on the top left hand side..then it goes back into the regular m$ dashboard, nothing new nothing changed except that i can now play burnt games. and still play on live when i disable the chip
i was told that if i installed a custom dashboard then i would not be allowed to play on live...so if i were to install the evox dashboard and also have my ms dashboard...wouldn't that suspend my account on live? :S not too sure on this. if not, then great :)
all i really wanted to do was to be able to copy games and also play on live, but i heard if you have the new dashboard that would suspend your account so i thought of installing the evox dashboard to copy the games i want and afterwards to reinstall the m$ dash to be able to play on live.
and thank you for the info about the bins..i actually did not know how to do it :)
|
|
PimpDawg
Suspended due to non-functional email address
|
18. September 2005 @ 21:46 |
Link to this message
|
|
Awesome, ok, well you're friend's friend is lying to you. You can indeed go on Xbox Live still if you have a custom dashbaord such as EvoX on your system. The thing that will be different is that when you turn on your Xbox w/ your modchip on, it will load into your EvoX dashboard instead of your orignal dashboard.
I can see how you got confused w/ what modchip you had. The thing you see on the screen is the bios that was flashed to your modchip. In your case, your friend's friend flashed the EvoX m8 bios on on your chip. I am guessing you have either a DuoX2, Spider, or Aladdin modchip.
Ok, so get comfortable using #xbins, and look for Slayers. Then, just follow what I said above and you'll be golden.
Oh, check your private messages by the way...
Proud member of the Afterdawn forums!
|
|
tapsta
Junior Member
|
24. September 2005 @ 11:43 |
Link to this message
|
|
I was successful in installing with slayers on my xbox. thank you for your help pimpdawg. ^^ the original problem was, i didn't edit the evox.ini file when i burnt the iso over, so i could not backup the xbox. everything works nicely now. thanks a bunch!
|
|
Advertisement
|
|
|
|
PimpDawg
Suspended due to non-functional email address
|
24. September 2005 @ 17:20 |
Link to this message
|
|
Glad to hear you got it working :-)
Proud member of the Afterdawn forums!
|
