|
[GUIDE]:UPMS-V4 (Sapphire) Installer **DO NOT USE WITH CFW 4.01M33 AND ABOVE!!**
|
|
|
xioxerxes
Newbie
|
10. November 2007 @ 14:07 |
Link to this message
|
|
I got the firmware files. The Pandora v1 with Pandora's GUI v1.5 lite and 150kernel_addon2.rar, etc., I can't find.
|
|
Advertisement
|
 |
|
|
Senior Member
9 product reviews
|
10. November 2007 @ 15:22 |
Link to this message
|
Originally posted by xioxerxes:
I got the firmware files. The Pandora v1 with Pandora's GUI v1.5 lite and 150kernel_addon2.rar, etc., I can't find.
I'm sure that the .cso has all those files...
|
Senior Member
|
10. November 2007 @ 15:43 |
Link to this message
|
Originally posted by xioxerxes:
I got the firmware files. The Pandora v1 with Pandora's GUI v1.5 lite and 150kernel_addon2.rar, etc., I can't find.
Yeah, the cso has all of that built into it already-You would install the patches and updates from the #4 option in the installer menu..The only thing you would need to get above and beyond the cso is the the official 1.50, 3.40, and 3.71 updates...
Please re-read the first post I made in this thread-It will tell you what you need to get started...This is not the manual method you may have read about. Trust me, you dont want to have to do try and make your memory stick the manual way..Just grab the cso, and the OFW updates and follow the directions I listed-its actually quite easy.
|
Senior Member
9 product reviews
|
10. November 2007 @ 15:59 |
Link to this message
|
Originally posted by dEEz_nUtz:
Originally posted by xioxerxes:
I got the firmware files. The Pandora v1 with Pandora's GUI v1.5 lite and 150kernel_addon2.rar, etc., I can't find.
Yeah, the cso has all of that built into it already-You would install the patches and updates from the #4 option in the installer menu..The only thing you would need to get above and beyond the cso is the the official 1.50, 3.40, and 3.71 updates...
Please re-read the first post I made in this thread-It will tell you what you need to get started...This is not the manual method you may have read about. Trust me, you dont want to have to do try and make your memory stick the manual way..Just grab the cso, and the OFW updates and follow the directions I listed-its actually quite easy.
It's very easy...
I looked at the original thread and I was shocked :P
It would take me 5 tries to get that done :P
So, this guide is brilliant.
|
Senior Member
|
10. November 2007 @ 16:21 |
Link to this message
|
|
^^It would take pretty much anybody five tries (or more)to get it right going the manual route (myself included)..I have been using this since it was just the original Pandora(v1) with the add-ons..Once they added the other menus and when it was required to have the multi-IPL on your memory stick, thats when things became confusing...You would not believe the number of times I have had to remake my memory stick because of an update for a newer app so it would work with another one properly, or most recently being the "joker fix"-Yeah, the manual way is not good....
|
Senior Member
9 product reviews
|
10. November 2007 @ 16:45 |
Link to this message
|
Originally posted by dEEz_nUtz:
^^It would take pretty much anybody five tries (or more)to get it right going the manual route (myself included)..I have been using this since it was just the original Pandora(v1) with the add-ons..Once they added the other menus and when it was required to have the multi-IPL on your memory stick, thats when things became confusing...You would not believe the number of times I have had to remake my memory stick because of an update for a newer app so it would work with another one properly, or most recently being the "joker fix"-Yeah, the manual way is not good....
Plus, it would take for at least 1hr-2hrs for that guide...And you need to download so much stuff...
|
Senior Member
|
10. November 2007 @ 17:42 |
Link to this message
|
|
^^At first, yeah...You had to download all of the components seperately until somebody came up with the idea of packaging them all together into about 20 different rar files...But even when v3 came out, it took me about an hour and a half to go through the guide..And that was just basically copy/pasting files and renaming a few text lines..It was not fun at all...
|
Senior Member
9 product reviews
|
10. November 2007 @ 17:47 |
Link to this message
|
Originally posted by dEEz_nUtz:
^^At first, yeah...You had to download all of the components seperately until somebody came up with the idea of packaging them all together into about 20 different rar files...But even when v3 came out, it took me about an hour and a half to go through the guide..And that was just basically copy/pasting files and renaming a few text lines..It was not fun at all...
Hehe, we feel your pain dEEz :P
Anyways, I'm sure this guide will be stickied... It's the best version of Pandora ;D
|
|
xioxerxes
Newbie
|
10. November 2007 @ 17:56 |
Link to this message
|
|
Ok, my problem is I did it the non-manual way. Its not working. Need to make the memory stick only. I have the battery already. The thing is I'm making the memory stick from the slim for the phat. So, any suggestions, ideas, or tips?
|
Member
|
10. November 2007 @ 17:57 |
Link to this message
|
|
Yo deez_nuts, thanks again for creating me the UPMS
I was just wondering something, i have the 1gb sandisk memory with all the Unbricker files, so... is it possible if i copy and paste all those files to my 256mb memory stick? and will it still work ?
because i wanna use my 4GB and 1GB MS, instead of using my 4gb and my 256 MS.
thx again, just wondering if it would work
Winning isn't everything...
IT'S THE ONLY THING !
|
Senior Member
9 product reviews
|
10. November 2007 @ 18:01 |
Link to this message
|
Originally posted by COOLnDRE:
Yo deez_nuts, thanks again for creating me the UPMS
I was just wondering something, i have the 1gb sandisk memory with all the Unbricker files, so... is it possible if i copy and paste all those files to my 256mb memory stick? and will it still work ?
because i wanna use my 4GB and 1GB MS, instead of using my 4gb and my 256 MS.
thx again, just wondering if it would work
It should work.
Just try it... Backup all the files from the 1GB to the desktop. Don't delete the files on your 1GB. Now, place the backed up files onto your 256MS then try the UPMS. If that doesn't work, then I'm afraid that you'll have to stick to the 256MB and 4GB.
|
Senior Member
|
11. November 2007 @ 00:23 |
Link to this message
|
Originally posted by xioxerxes:
Ok, my problem is I did it the non-manual way. Its not working. Need to make the memory stick only. I have the battery already. The thing is I'm making the memory stick from the slim for the phat. So, any suggestions, ideas, or tips?
I am not sure if you can run the installer cso from slim psp-I have not tried it myself...You may end up having to do yours manually.The guide can be found HERE-(scroll down to "Installation for psp slim") Its not as involved as doing a manual fat install, as there are way less files to deal with. I would give that a shot.
|
Senior Member
|
11. November 2007 @ 00:31 |
Link to this message
|
Originally posted by COOLnDRE:
Yo deez_nuts, thanks again for creating me the UPMS
I was just wondering something, i have the 1gb sandisk memory with all the Unbricker files, so... is it possible if i copy and paste all those files to my 256mb memory stick? and will it still work ?
because i wanna use my 4GB and 1GB MS, instead of using my 4gb and my 256 MS.
thx again, just wondering if it would work
No Problem, I am glad its working out for you.
As far as copy/pasting the files over to your 256MB memstick-I would follow the advivce that kikzm33z gave a couple posts up...I dont think it will work, but its worth a try...The reason it may not work is because the IPL is written directly to a sector in the memory stick itself, and you cant copy/paste that.
If worst comes to worst-you would just have to use the installer cso to make one of your own on the 256MB..Provided you have a psp running cfw. If you need help with it, send me a PM.
|
Senior Member
9 product reviews
|
11. November 2007 @ 06:54 |
Link to this message
|
Originally posted by dEEz_nUtz:
Originally posted by COOLnDRE:
Yo deez_nuts, thanks again for creating me the UPMS
I was just wondering something, i have the 1gb sandisk memory with all the Unbricker files, so... is it possible if i copy and paste all those files to my 256mb memory stick? and will it still work ?
because i wanna use my 4GB and 1GB MS, instead of using my 4gb and my 256 MS.
thx again, just wondering if it would work
No Problem, I am glad its working out for you.
As far as copy/pasting the files over to your 256MB memstick-I would follow the advivce that kikzm33z gave a couple posts up...I dont think it will work, but its worth a try...The reason it may not work is because the IPL is written directly to a sector in the memory stick itself, and you cant copy/paste that.
If worst comes to worst-you would just have to use the installer cso to make one of your own on the 256MB..Provided you have a psp running cfw. If you need help with it, send me a PM.
I copied my IPL from another tutorial to get the UPMS to work. I had no IPL in the root of my MS so I just copied that IPL into my MS and now it works.
|
Member
|
11. November 2007 @ 11:00 |
Link to this message
|
|
Ah! Too many options. I'm just going to do the one where you can upgrade both Fat and Slim PSPs to 3.71 M33-2. I don't see why you need 10 different options.
My PSP Firmware History: 2.60 had to return the PSP because it had a dead pixel > new PSP had firmware 2.71 > 1.5 > 3.52 M33 > 3.52 M33-4 > 3.71 M33 > 3.71 M33 with 1.50 kernel
|
Senior Member
|
11. November 2007 @ 12:30 |
Link to this message
|
Originally posted by kikzm33z:
I copied my IPL from another tutorial to get the UPMS to work. I had no IPL in the root of my MS so I just copied that IPL into my MS and now it works.
Thats odd...I didn't think you would be able to do that-I guess if it works for you, then by all means...
|
|
xioxerxes
Newbie
|
11. November 2007 @ 12:40 |
Link to this message
|
Originally posted by dEEz_nUtz:
Originally posted by xioxerxes:
I got the firmware files. The Pandora v1 with Pandora's GUI v1.5 lite and 150kernel_addon2.rar, etc., I can't find.
Yeah, the cso has all of that built into it already-You would install the patches and updates from the #4 option in the installer menu..The only thing you would need to get above and beyond the cso is the the official 1.50, 3.40, and 3.71 updates...
Please re-read the first post I made in this thread-It will tell you what you need to get started...This is not the manual method you may have read about. Trust me, you dont want to have to do try and make your memory stick the manual way..Just grab the cso, and the OFW updates and follow the directions I listed-its actually quite easy.
Confusing me. Am I supposed to manual it, or do it the easy installer way?
|
Senior Member
9 product reviews
|
11. November 2007 @ 12:41 |
Link to this message
|
Originally posted by dEEz_nUtz:
Originally posted by kikzm33z:
I copied my IPL from another tutorial to get the UPMS to work. I had no IPL in the root of my MS so I just copied that IPL into my MS and now it works.
Thats odd...I didn't think you would be able to do that-I guess if it works for you, then by all means...
I got my IPL from Larry's guide. It's from the same stick though...
|
Senior Member
|
11. November 2007 @ 12:48 |
Link to this message
|
Originally posted by xioxerxes:
Confusing me. Am I supposed to manual it, or do it the easy installer way?
If you are using a slim psp then you will need to do it manually
|
|
Alfx
Junior Member
|
11. November 2007 @ 13:21 |
Link to this message
|
|
I got a pandora battery
I have a FAT psp.
What step do I need to follow to downgrade this?
Thanks
I will Always be there
|
Senior Member
9 product reviews
|
11. November 2007 @ 15:26 |
Link to this message
|
Originally posted by Alfx:
I got a pandora battery
I have a FAT psp.
What step do I need to follow to downgrade this?
Thanks
Have you made the Magic memory stick?
|
AfterDawn Addict
|
11. November 2007 @ 15:53 |
Link to this message
|
|
It's easy. In fact, I don't know where it is or what it's called, but there is an app you can run (homebrew) which will format your memstick just like you need via mspinst. It's for total n00bs.
(+[O_O]::) |
|
Alfx
Junior Member
|
11. November 2007 @ 20:41 |
Link to this message
|
Originally posted by kikzm33z:
Originally posted by Alfx:
I got a pandora battery
I have a FAT psp.
What step do I need to follow to downgrade this?
Thanks
Have you made the Magic memory stick?
No, I don't know how.
I don't have access to a psp with CFW, so I'd need the easiest installer to make a magic memory stick.
|
AfterDawn Addict
|
11. November 2007 @ 20:59 |
Link to this message
|
|
Well unfortunately, if you don't already have a psp w/ custom fw or a mate who has one, you're kind of out of luck. You need 1.50 kernel to create the memstick in this format.
(+[O_O]::)
|
|
Advertisement
|
|
|
|
Alfx
Junior Member
|
11. November 2007 @ 22:33 |
Link to this message
|
Originally posted by guano:
Well unfortunately, if you don't already have a psp w/ custom fw or a mate who has one, you're kind of out of luck. You need 1.50 kernel to create the memstick in this format.
I already have the pandora battery, I just need the installer or w/e to make the memory stick
I will Always be there
|
