The most up-to-date tutorial and most current softmod files can be found at How to softmod your Xbox with SID 4.0

How to Softmod
Written by AzzidReign (on aD - azzidrain)

Requirements:

Newest Microsoft Dashboard

Action Replay:




1 of these 3 games:





SID 4.0 - Softmod/Linux files (Each download contains all files for all 3 games):
Download

NOTE: After you download this file, go to the file location, double click it and extract it. Do NOT extract any more files! When you try to transfer the game save over and you get an INVALID GAMESAVE error, then you did not read this note.
If you have linux files from another tutorial, delete them and use these since these are the essentials to this softmodding tutorial.
Only extract the SID-4.0-Nknave.rar, NOTHING MORE.

Step 1: Install the software that came with your Action Replay (will be referred as AR from now on). If you are confused at what this means, a disc comes with AR, put that in and install it.

Step 2: Plug in your AR USB adapter into your USB port on your computer. Make sure your memory card is in the adapter now.

Step 3: Bring up the AR program. It should look like this:



Step 4: Take the SID4.NK.Launcher file from your folder you saved it to and drag it to the Memory Card (MC) slot on your AR software. It should look like this:



Step 5: Now, there are 4 files left for each game that I stated above in the requirements (2 for Splinter Cell). Take the file that is associated with the game you are going to use. NOTE: Splinter Cell has PAL and NTSC, please choose the appropriate file. If you do not know what to chose, please ask someone from the site for assistance.
Depending on which game you use, this is about what it should look like (this is exactly what Splinter Cell users should see):



Step 6: Once you have both files on your MC, remove it from the AR adapter and bring it over to your Xbox. Plug it into your controller and boot up your Xbox without a game in the drive.

Step 7: Transfer the files onto your hard drive (hdd). To do this go to the "Memory" screen from the main standard MS Dashboard. When you get into the memory menu, click on the memory card (by pressing left on the D-Pad) and select it by pressing A. When you get into your memory card and find the file, you might have to press the right button on your D-Pad to select the file and then choose copy. Do this for BOTH files or else the installation will not work/start.

Step 8: Now that the files have been transfered to the Xbox, put the game in that you are going to use to softmod with (Splinter Cell, Mechassault, 007:AUF). Each game is different when it comes to how to load linux. Here's the break down:

Splinter Cell: Go to Start Game, click LINUX, and you wont see any check points, but still press A for the Check Points twice. Then the installer should load up. Pics of the process:





Mechassault: Go to Campaign, click Run Linux and that should load the installer. Mechassualt is known to be harder to get the installer loading since it requires a certain edition. Please be sure that when you have 'Run Linux' highlighted, the files description is as follows:
Controls: Normal
Difficulty: Regular
Current Level: Going Down Hard
If that does not show up, then you will have to get a different version or get Splinter Cell or 007.
Pics of the process:



007: Go to Load Mission, then select the Xbox Hard Disk option and that should load the installer. Pics of the process:





This is what Softmod Installer Deluxe 4's menu should look like:



Step 9: This is a KEY step! Now that the installer has loaded, go to 'CREATE MS BACKUP'. This is incase you want to unmod your Xbox for any reason/technical reason.

Step 10: This is another essential step! Go to 'CREATE EEPROM BACKUP'. If you do not do this step, the installer will NOT let you move on. After you click that, a new menu will come up. In that menu, click 'CREATE EEPROM BACKUP'. When that is done, click 'BACK TO MAIN MENU'.

Step 11: Once you are back to the Main Menu, scroll down to 'Install Softmod'. Here's what you should be choosing for each menu (this goes in order):
a] Click Dual Boot for NTSC or PAL (which ever one is for you, if you do not know, please contact someone for assistance)
b] Click Knaves Ndure, Open tray = Retail
c] Choose either the Installation for EvolutionX or UnleashX. For a Novice, I would suggest UnleashX.

Step 12: Three messages will pop up. After reading and understanding each, Press A. On the 3rd message, you will get this message: "All requirements pass. Continue Install?" Click Yes.

Step 13: After the installation is complete, you will get this message:
"Softmod successfully installed, your virtual eeprom must be patched, after eeprom, now you'll boot to installer"
That sentence did not make sense to me, so just press OK. Now a new message pops up:
"The installer will now boot to patching system after it is completed, please turn off Xbox and power back on without game disc to finish install."
Click YES.

Step 14: Press eject and take out your disc and then close the tray. Turn it off. Once off, turn it back on by pressing the power button. When it boots up, UnleashX will appear with a "Softmod Successful" message. It says that it needs 1 more step to finish the install. PRESS A.

After it is finished installing everything, your Xbox will automatically reboot and your UnleashX dashboard should appear. Congratulations! You have just successfully softmodded your Xbox!

Please read this tutorial to insure that you will never have a broken Xbox from being softmodded.

Trouble Shooting and FAQ
If you are having problems with this tutorial or ran into a problem, read [URL]http://www.se7ensins.com/forums/xbox-softmod-tutorials/17600-sid-4-information-faq-troubleshooting.html[/URL] This is a very detailed guide as to how SID works and how you can fix your Xbox if something happens to go wrong.

How to get on LIVE!
IMPORTANT: When doing this, make sure your LED is green. GREEN = safe to access LIVE! RED = Not safe to access live and can result in a permanent Xbox ban!
Step 1: Hit Eject. Make sure the LED is GREEN! If it's red, you can get banned.
Step 2: Put the game in you wish to play on LIVE!
Step 3: Sign in to Xbox LIVE!
Step 4: Play and ENJOY!
NOTE: I've been told that you may have to change your IP to DHCP (aka automatic IP) to access LIVE via the modded dash (most likely UX)!

NOTE: This tutorial does NOT let you evade the banhammer from Bungie and Halo 2 modded maps.

Other Useful Tutorials/Links:
FTP-your-xbox.html" target="_blank">How to FTP
Halo2-maps-off-your-hdd-mod-them.html" target="_blank">FTP to your Halo 2 Maps
How to Mod Halo 2 for Beginners
How to Burn Games
Emulator Downloads
How to Use Auto-Installer Deluxe



©AzzidReign at http://www.Se7enSins.com/



CREDITS: Pictures of the installer and the games menu's from the SID 4.0 manual. Thanks goes out to those that made this happen: Nknave, DJB, Pirrup, and everyone else mentioned in the manual for the great installer and the manual for me to encode for the non-so-technical group of people. Their site: http://www.xbox-hq.com/

http://my.afterdawn.com/azzidrain/ <--- Visit my aD page for up to date info about how tomod Xbox 360, Modern Warfare 2 glitches, etc. All you 360 needs in 1 place.

This message has been edited since posting. Last time this message was edited on 25. May 2007 @ 07:40

This message has been edited since posting. Last time this message was edited on 5. December 2006 @ 18:02

http://my.afterdawn.com/azzidrain/ <--- Visit my aD page for up to date info about how tomod Xbox 360, Modern Warfare 2 glitches, etc. All you 360 needs in 1 place.

This message has been edited since posting. Last time this message was edited on 7. June 2007 @ 09:54

http://my.afterdawn.com/azzidrain/ <--- Visit my aD page for up to date info about how tomod Xbox 360, Modern Warfare 2 glitches, etc. All you 360 needs in 1 place.

This message has been edited since posting. Last time this message was edited on 5. March 2006 @ 14:08

This message has been edited since posting. Last time this message was edited on 5. March 2006 @ 19:12