|
|
|
DVD SHRINK downunder
|
|
|
hamsplace
Newbie
|
14. June 2006 @ 03:10 |
Link to this message
|
|
Hi , and I hope you can help me.
I have been hapily burning DVD's for some time now ( much to my families delight ) and having spent all day reading various forums for help and advice '
, I am resigned to the fact that whatever I seem to try , nothing fixes my problem---- The problem many others seem to have experienced with DVD Shrink and Nero. Till now all has been simple -- untill the WRITE ERROR .I upgraded from the original disc that came with the BenQ 1620 Burner some 18 months ago - Nero 6.3.something .
and upgraded to Nero Ultra 7. While Dvd Shrink semms to analyse and encodes successfuly , as soon as Nero starts I only get as far as the lead in before the disc pops out and I get the bad news about a write error.
I have tried going back to my original Nero version as well as several other versions that many posts have deemed to be successful but alas I am still unable to burn a DVD.
I have used several different discs and have tried to burn the files "left behind" just with Nero but still no luck .
Is my burner KAPUT or is there something I can do to get back in the game,??
I just tried burning Golf For Dummies without success and here is the Hijack This log Post with the burn failure attatched. Is there any help anyone can give me before I ....
|
|
Advertisement
|
|
|
|
|
hamsplace
Newbie
|
14. June 2006 @ 03:15 |
Link to this message
|
YIKES !! Forgot to leave the Hijack this post as I said .
Here it is
5C82001080000000005666827687
*5C82001080000000005666827687
**5C82001080000000005666827687
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00JKC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-115 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
BENQ DVD DD DW1620 D: CDRom0
PIONEER DVD-ROM DVD-115 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 206MB (211168kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
NeroAPI
7:17:21 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
7:17:21 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
7:17:21 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
7:17:22 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
7:17:22 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
7:17:22 PM #6 Text 0 File Writer.cpp, Line 113
Writer D: BENQ DVD DD DW1620 running
7:17:22 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
7:17:22 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
7:17:22 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
7:17:22 PM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
7:17:22 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1603839 (356:24.39, 3132MB)
7:17:22 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO
7:17:22 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: BENQ DVD DD DW1620, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
7:17:22 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:17:22 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1603840 (1603840) = #1603840/356:24.40
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1603840 blocks [D: BENQ DVD DD DW1620]
--------------------------------------------------------------
7:17:22 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3284664320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1603840 | lead-out | 1 | 0x41 | 0x00
7:17:22 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:17:23 PM #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
7:17:23 PM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
7:17:23 PM #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
7:17:23 PM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 16x (22,160 KB/s)
7:17:23 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:17:23 PM #23 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
7:17:23 PM #24 Text 0 File MMC.cpp, Line 21541
Set BUFE: Seamless Link -> ON
7:17:23 PM #25 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
7:17:23 PM #26 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:18:37 PM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x08230000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7:18:38 PM #28 CDR -1135 File Writer.cpp, Line 302
Write error
D: BENQ DVD DD DW1620
7:18:38 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:18:49 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:18:50 PM #31 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1
7:18:50 PM #32 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 16x (22,160 KB/s)
7:18:50 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
7:18:51 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
14. June 2006 @ 04:12 |
Link to this message
|
@hamsplace
I'm not the best at reading these logs but it's for sure you're trying to burn the media at too high a speed (16X) cut it back to 4X then up to 8X (in good time)with good media. What media are you using? There is a Medium _key_error in the log as if the drive does not like or recognize your media.
Maybe Gwendolin or Binkie7 will come along and help you better than I. Both very good with Nero logs.
|
|
Dogman5
Member
|
14. June 2006 @ 04:20 |
Link to this message
|
|
garmoon I would have to agree on what you said about burn speed and media. hamsplace I would also switch to Nero 6.6 I tried Nero Ultra 7 and had problems with it so I went back to Nero 6.6 which works great and no problems. Good Luck
This message has been edited since posting. Last time this message was edited on 14. June 2006 @ 04:23
|
Moderator
1 product review
|
14. June 2006 @ 05:04 |
Link to this message
|
Quote:
Nero API version: 7.0.0.0
Update Nero with this link, use the clean tools and then reinstall. I would suggest 6.6.0.18 as it seems to work better for some, I use Nero 7 and have no problems with it...but since you have access to both version I'll leave that decision up to you.
http://my.afterdawn.com/locoeng/blog_entry.cfm/280
These guys have hit it right on the head with the media you are using...
Quote:
Recorder: BENQ DVD DD DW1620, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
TDK's are terrible, try some Verbatims. Also don't burn at more than one half the rated speed of your media....16X is waaaay too fast.
|
|
hamsplace
Newbie
|
14. June 2006 @ 05:20 |
Link to this message
|
Hi again ,.
Thanks for your replies , I greatly appreciate it.
Apologies for sounding totally inept but Can you tell me how to adjust the burn speed as Nero just seems to burn at the speed the discs are rated at . the TDK and Sony discs I have are 16 speed. I have been using these for 6-8 months with no problems up till now . I have also tried going back to Nero 6.6 after downloading the clean-up tool and searching out all associated remnant files also but was still unable to get a burn going after DVD Shrink finished analysing and encoding.
I have also had an occasional error saying Cannot connect TRF --
Thanks again.
|
Moderator
1 product review
|
14. June 2006 @ 06:05 |
Link to this message
|
In DVD Shrink once you've clicked backup and the new window pops up where you select your target, the last tab should be burn settings...choose your speed there. Make sure you have a blank disc in the drive or you will only get the default speeds in Nero (if no speed is selected the default in maximum). You must select your speed for each burn because Nero reverts back to default after each burn. You could also create an ISO with DVD Shrink and use Imgburn to burn, once you select your speed that becomes the default speed.
|
|
hamsplace
Newbie
|
14. June 2006 @ 13:47 |
Link to this message
|
Thanks Locoeng ,
I have installed Imgburn - looks simple -- how do I get DVD Shrink to create the ISO from the DVD and get that into Imgburn . Can you "walk me through" that ? Yes I know - dumb Aussie .
|
|
hamsplace
Newbie
|
14. June 2006 @ 14:29 |
Link to this message
|
|
Update -- I managed to get my head around that and oganised the iso file , sent it to Imgburn and all began well for about 10 seconds - then I got the dreaded write error and the burn was terminated.
I had halved the 16 speed disc to 8 as advised.
Does this mean that the burner is stuffed ? Any other ideas ?
Thanks for your time again.
|
|
hamsplace
Newbie
|
14. June 2006 @ 15:26 |
Link to this message
|
Just to add to the last post -- I just burnt a music CD directly with Nero --and that worked fine . I tried originally to do this using the burning facillity directly in WM Player but that was unable to due to an unspecified error.
|
Senior Member
|
14. June 2006 @ 15:37 |
Link to this message
|
|
i would try burning at 4X speed because i have TDK's rated at 16X speed too and have tried at 8X speed and have failed. but have not failed burning at 4X speed once
|
Moderator
1 product review
|
14. June 2006 @ 15:58 |
Link to this message
|
You didn't happen to save that Imgburn log did you? That BenQ drive should last alot longer than 18 months unless you burn 1000 discs a month. Also post your last Nero log, it should be different than the one that you've already posted.
Run this little tool and see if your system ASPI layer or Nero ASPI is corrupt.
http://www.afterdawn.com/software/cdr_software/cdr_tools/nero_inf...
|
|
hamsplace
Newbie
|
14. June 2006 @ 17:38 |
Link to this message
|
Hi ,
I installed the tool - under system aspi it says Not Installed --under Nero aspi it says installed and working properly. I will try and post another burn log from Nero and Imgburn again
Thanks for the advice so far.
|
Moderator
1 product review
|
14. June 2006 @ 17:43 |
Link to this message
|
|
No problems keep us posted.
|
|
hamsplace
Newbie
|
14. June 2006 @ 18:05 |
Link to this message
|
5C82001080000000005666827687
*5C82001080000000005666827687
**5C82001080000000005666827687
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00JKC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-115 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
BENQ DVD DD DW1620 D: CDRom0
PIONEER DVD-ROM DVD-115 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 81MB (83948kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.6.2006
NeroAPI
11:49:31 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
11:49:31 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
11:49:31 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
11:49:32 AM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 64512KB of Memory
11:49:32 AM #5 Text 0 File Reader.cpp, Line 124
Reader running
11:49:32 AM #6 Text 0 File Writer.cpp, Line 113
Writer D: BENQ DVD DD DW1620 running
11:49:32 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:49:32 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
11:49:32 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
11:49:32 AM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
11:49:32 AM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2179631 (484:21.56, 4257MB)
11:49:32 AM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO
11:49:32 AM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: BENQ DVD DD DW1620, Media type: DVD-RW
Disc Manufacturer: TDK502 - sakuM3
Disc Application Code: 64, Disc Physical Code: 214
11:49:32 AM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:49:32 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2179632 (2179632) = #2179632/484:21.57
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2179632 blocks [D: BENQ DVD DD DW1620]
--------------------------------------------------------------
11:49:32 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4463886336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2179632 | lead-out | 1 | 0x41 | 0x00
11:49:32 AM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:49:34 AM #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
11:49:34 AM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
11:49:34 AM #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
11:49:34 AM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
11:49:34 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:49:34 AM #23 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
11:49:34 AM #24 Text 0 File MMC.cpp, Line 21541
Set BUFE: Seamless Link -> ON
11:49:34 AM #25 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
11:49:34 AM #26 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:49:41 AM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x00db0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:49:41 AM #28 CDR -1135 File Writer.cpp, Line 302
Write error
D: BENQ DVD DD DW1620
11:49:41 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:49:41 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:49:42 AM #31 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1
11:49:42 AM #32 Phase 181 File APIProgress.cpp, Line 278
Writing lead-out...
11:49:42 AM #33 Text 0 File DVDR.cpp, Line 2899
Estimated time for 30mm Borders: 5min 47sec
11:49:42 AM #34 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
11:49:42 AM #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:49:42 AM #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Here is the last Nero burn attempt . I adjusted the speed down to 2.4 but it didn't get a start.I'll do an Imgburn asap
|
|
hamsplace
Newbie
|
14. June 2006 @ 18:28 |
Link to this message
|
Here is the Imgburn attempt -- I hope I've done this correctly
I 12:21:15 ImgBurn Version 1.3.0.0 started!
I 12:21:15 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 12:21:15 Initialising SPTI...
I 12:21:15 Searching for SCSI / ATAPI devices...
I 12:21:16 Found 1 DVD-ROM and 1 DVD±RW!
I 12:22:49 Operation Started!
I 12:22:49 Source File: C:\GOLF_FOR_DUMMIES.ISO
I 12:22:49 Source File Sectors: 1,603,574 (MODE1/2048)
I 12:22:49 Source File Size: 3,284,119,552 bytes
I 12:22:49 Source File Volume Identifier: GOLF_FOR_DUMMIES
I 12:22:49 Source File Implementation Identifier: DVD Shrink
I 12:22:50 Source File UDF Revision: 1.02
I 12:22:50 Destination Device: [1:0:0] BENQ DVD DD DW1620 B7W9 (D:) (ATA)
I 12:22:50 Destination Media Type: DVD-R (Disc ID: SONY08D1) (Speeds: 2.4x, 4x, 8x, 12x, 16x)
I 12:22:50 Destination Media Sectors: 2,298,496
I 12:22:50 Write Mode: DVD
I 12:22:50 Write Type: DAO
I 12:22:50 Write Speed: 4x
I 12:22:50 Link Size: Auto
I 12:22:50 Test Mode: No
I 12:22:50 BURN-Proof: Enabled
I 12:22:50 Filling Buffer...
I 12:22:54 Writing LeadIn...
W 12:23:05 Failed to Write Sectors 0 - 31 - Write Error
W 12:23:05 Retrying (1 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (2 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (3 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (4 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (5 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (6 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (7 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (8 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (9 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (10 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (11 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (12 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (13 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (14 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (15 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (16 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (17 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (18 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (19 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
W 12:23:05 Retrying (20 of 20)...
W 12:23:05 Retry Failed - Invalid Address For Write
E 12:23:27 Failed to Write Sectors 0 - 31 - Write Error
I 12:23:27 Synchronising Cache...
E 12:23:28 Failed to Write Image!
E 12:23:28 Operation Failed! - Duration: 00:00:38
I 12:23:28 Average Write Rate: N/A - Maximum Write Rate: N/A
Doesn't look good , hey.
|
|
Advertisement
|
|
|
Moderator
1 product review
|
15. June 2006 @ 05:23 |
Link to this message
|
Your first log and the log you just posted at the top are identical...
Quote:
Nero API version: 7.0.0.0
Using interface version: 6.3.1.4
Use the clean tool for Nero 6 and install the update for 7 from the link that I provided earlier. Between the two logs I would say get some good media....verbatims are on sale at Best Buy this week, 50 for $15.
|
|
