|
|
|
Burning Error w/ DVD Shrink and Nero7
|
|
|
akaonohi
Newbie
|
4. March 2007 @ 08:37 |
Link to this message
|
I've been using DVDFAB, DVDShrink and Nero 7 lately and haven't had any problems until I came across The Break Up, Flushed Away, and The Prestige. Not sure why it won't burn. DVDFAB and DVDShrink don't seem to have a problem ripping and encrypting. Just the burn. Here's the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.5.7.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 5, 7, 0
Recorder: <PLEXTOR DVDR PX-708A> Version: 1.12 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00CAA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W4012A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-708A E: CDRom0
PLEXTOR CD-R PX-W4012A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572340kB)
Free physical memory: 915MB (937960kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.3.2007
NeroAPI
5:23:11 PM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started
5:23:11 PM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)
5:23:11 PM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
5:23:11 PM #4 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:23:11 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:23:11 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
5:23:11 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
5:23:11 PM #8 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media
5:23:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1726671 (383:42.21, 3372MB)
5:23:44 PM #10 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO
5:23:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: PLEXTOR DVDR PX-708A, Media type: DVD+R
5:23:44 PM #12 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW.)
5:23:44 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1726672 (1726672) = #1726672/383:42.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1726672 blocks [Main]
--------------------------------------------------------------
5:23:44 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [PLEXTOR DVDR PX-708A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3536224256, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1726672 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1726672 | 0 | 0x00
1726672 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
5:23:44 PM #15 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:23:44 PM #16 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
5:23:44 PM #17 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.
5:23:44 PM #18 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
5:23:44 PM #19 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 8x (11,080 KB/s)
5:23:44 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:23:44 PM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x00cbc200: Len x804
5:23:44 PM #22 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes
5:29:22 PM #23 TRANSFER -25 File Reader.cpp, Line 333
Error reading data
5:29:22 PM #24 Text 0 File Reader.cpp, Line 336
Exception value: -1
5:29:47 PM #25 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 8x (11,080 KB/s)
5:29:47 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
5:29:47 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
5:29:47 PM #28 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed
5:29:47 PM #29 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
|
|
Advertisement
|
  |
|
|
|
laddyboy
AfterDawn Addict
|
4. March 2007 @ 09:10 |
Link to this message
|
|
|
|
akaonohi
Newbie
|
4. March 2007 @ 14:01 |
Link to this message
|
Thanks for the reply. I'm using verbatim DVD+R disc.
I don't have Nero 7 over Nero 6 because I only own Nero 7 and I just reformatted my hd. Sorry I don't mean to sound like a smartass. Should I still try to reinstall Nero 7?
|
|
laddyboy
AfterDawn Addict
|
4. March 2007 @ 15:35 |
Link to this message
|
Hello again.
Quote:
Using interface version: 6.3.1.4
The above appears to be a Nero 6 file. I don't know why it's showing up in your log. I doubt it's causing the problem.
Try creating an image file instead of burning directly to the disk. Use ImgBurn to burn the image to a disk. If that works, you know the problem is with Nero.
|
|
Car.Mike
AfterDawn Addict
|
4. March 2007 @ 15:37 |
Link to this message
|
|
akaonohi,
Keep 7 for now and this is one reason I do not like the logs in 7 as it does not tell you what DVD blank you are using. Your error is below. Re-Rip the DVD as the computer is having a problem reading the files that you rippped. If you did not use this ripper then use Ripit4Me to rip the DVD to the HD and make sure you use the 1 click mode
5:23:44 PM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x00cbc200: Len x804
5:23:44 PM #22 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes
5:29:22 PM #23 TRANSFER -25 File Reader.cpp, Line 333
Error reading data
5:29:22 PM #24 Text 0 File Reader.cpp, Line 336
Exception value: -1
|
|
PacMan777
AfterDawn Addict
|
5. March 2007 @ 02:05 |
Link to this message
|
6.3.1.4 is a version number from Nero 6 for the Burning ROM and Nero Express. Did you have Nero 6 before you did your format and installed Nero 7? It's strange to see it in a version of Nero 7. Was that a full format done where the drive got wiped clean or just a reinstallation of Windows? Don't mean to be a smartass, but that file doesn't look right in there. That was one of the troublesome versions Nero released as well. I'd suggest using the Nero clean tool and completely clean out Nero and then do a fresh install of Nero 7. Then see if 6.3.1.4 shows up again.
|
|
Car.Mike
AfterDawn Addict
|
5. March 2007 @ 02:33 |
Link to this message
|
PacMan777,
If I am not mistaken "Using interface version: 6.3.1.4 " is normal in Nero 7.
|
|
PacMan777
AfterDawn Addict
|
5. March 2007 @ 14:36 |
Link to this message
|
I've got Nero 7. I used the Nero cleaner tool to get rid of all remnants of Nero 6 and made sure the Nero folder was gone before I did a clean install. Here's one of my burn logs. Note no 6.3.1.4 and the media is identified by the program.
====== *** Nero Burning ROM, History File *** ======
1C82-xxxx-xxxx-xxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 11:54:32 AM
NT-SPTI used
Nero Version: 7.0.1.3
Internal Version: 7, 0, 1, 3
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716AL> Version: 1.02 - HA 1 TA 0 - 7.0.1.3
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PLEXTOR DVDR PX-716AL >Version: 1.02 - HA 1 TA 0 - 7.0.1.3
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : IVI Virtual CD 0.5a iviVD Port 0 ID 0 DMA: Off
DiskPeripheral : ST3250620AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3250620AS atapi Port 2 ID 0 DMA: On
DiskPeripheral : WDC WD2500JB-55EVA0 nvatabus Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD3000JB-00KFA0 nvatabus Port 3 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716AL nvatabus Port 3 ID 2 DMA: On
CdRomPeripheral : HP DVD Writer 740b nvatabus Port 3 ID 3 DMA: On
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716AL F: CDRom0
HP DVD Writer 740b G: CDRom1
IVI Virtual CD I: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096340kB)
Free physical memory: 1325MB (1357604kB)
Memory in use : 35
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.2.2007
Burn DVD Image
9:42:16 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
9:42:16 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
9:42:16 PM #3 Text 0 File Writer.cpp, Line 113
Writer F: PLEXTOR DVDR PX-716AL running
9:42:16 PM #4 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
9:42:16 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2274340 (505:24.40, 4442MB)
9:42:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
9:42:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-716AL, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
9:42:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:42:16 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2274341 (2274341) = #2274341/505:24.41
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274341 blocks [F: PLEXTOR DVDR PX-716AL]
--------------------------------------------------------------
9:42:16 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: PLEXTOR DVDR PX-716AL] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4657850368, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2274341 | lead-out | 1 | 0x41 | 0x00
9:42:16 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:42:16 PM #12 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8,310 KB/s)
9:42:16 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:42:16 PM #14 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY....
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
9:42:16 PM #15 Text 0 File DVDR.cpp, Line 5683
Drive: PLEXTOR DVDR PX-716AL
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
9:42:16 PM #16 CDR -1211 File DVDR.cpp, Line 5321
Book Type set to: DVD-ROM
9:42:16 PM #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
9:42:18 PM #18 Text 0 File Cdrdrv.cpp, Line 1197
21:42:18.265 - F: PLEXTOR DVDR PX-716AL : Queue again later
9:52:10 PM #19 Text 0 File WriterStatus.cpp, Line 116
<F: PLEXTOR DVDR PX-716AL> start writing Lead-Out at LBA 2274341 (22B425h), length 0 blocks
9:52:10 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:52:32 PM #21 Text 0 File DVDR.cpp, Line 5683
Drive: PLEXTOR DVDR PX-716AL
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
9:52:32 PM #22 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 6x (8,310 KB/s)
10:29:01 PM #23 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2274340 (505:24.40, 4442MB)
10:29:01 PM #24 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
10:29:01 PM #25 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-716AL, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:29:01 PM #26 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
10:29:01 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: PLEXTOR DVDR PX-716AL] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4657850368, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2274341 | lead-out | 1 | 0x41 | 0x00
10:29:01 PM #28 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:29:01 PM #29 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8,310 KB/s)
10:29:01 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:29:01 PM #31 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY....
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
10:29:01 PM #32 Text 0 File DVDR.cpp, Line 5683
Drive: PLEXTOR DVDR PX-716AL
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
10:29:01 PM #33 CDR -1211 File DVDR.cpp, Line 5321
Book Type set to: DVD-ROM
10:29:01 PM #34 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
10:29:03 PM #35 Text 0 File Cdrdrv.cpp, Line 1197
22:29:03.140 - F: PLEXTOR DVDR PX-716AL : Queue again later
10:38:55 PM #36 Text 0 File WriterStatus.cpp, Line 116
<F: PLEXTOR DVDR PX-716AL> start writing Lead-Out at LBA 2274341 (22B425h), length 0 blocks
10:38:55 PM #37 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:39:16 PM #38 Text 0 File DVDR.cpp, Line 5683
Drive: PLEXTOR DVDR PX-716AL
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
10:39:16 PM #39 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 6x (8,310 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
This message has been edited since posting. Last time this message was edited on 5. March 2007 @ 14:37
|
|
Car.Mike
AfterDawn Addict
|
5. March 2007 @ 16:05 |
Link to this message
|
PacMan777,
Your log looks like it came from Nero Recode. My log below came from a really old burn I did( and I have no idea why I kept this log as I ususally delete them) and I only used the burning Rom as that is what Shrink uses. I think that is what the difference is here. One using the burning Rom and the other using Recode along w/ the burning Rom. Could I be incorrect, Hell it will not be the first time. Never had Nero 6 on this new computer as it is still on my older computer
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/16/2005 9:24:35 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Edit: Deleted the rest of the log
This message has been edited since posting. Last time this message was edited on 5. March 2007 @ 16:06
|
|
PacMan777
AfterDawn Addict
|
5. March 2007 @ 18:01 |
Link to this message
|
Maybe the older version number 6.3.1.4 came up with some older versions of Nero 7, but I don't remember seeing it. If you notice the segment I marked in red, Nero Express is where the log came from, not Recode. Since Express and the Burning ROM utilize the same burning engine, they share the same version numbers. Use infotool and check software to see if you have 6.3.1.4 listed for any of the programs. Here's mine and no 6.3.1.4.
|
|
SStrummer
Suspended due to non-functional email address
|
6. March 2007 @ 04:26 |
Link to this message
|
Hi Guys - great site! I got here from Google as I am experiencing the same problem with DVD Shrink/Nero combination. I'll give your advice a go and report back if successful.
The main reason I'm posting this is that my Nero [OEM 6?? I think] will not burn DVD-R format disc but it will still burn DVD+R discs!
I must also add that I often use Sonic Record Now to copy discs and this is performing identically to Nero, happily burning +format discs but not -format.
Thanks again for your advice.
|
|
PacMan777
AfterDawn Addict
|
7. March 2007 @ 00:57 |
Link to this message
|
Sometimes Sonic (Roxio) and Nero don't play well together. There's even been cases where Roxio and Nero played well together for a long time and something with an update set them at odds. Some people can have the different software on their systems and never suffer a problem while others have nothing but conflicts and have to settle for one or the other.
Since you mentioned the format issue, that sounds more like a burner problem than the software. Media compatiblity and firmware sound more like the issues. DVD Identifier (free download) will give manufacturer info you need to give us on your media. Also, what model burner do you have and what is your firmware version?
|
|
SStrummer
Suspended due to non-functional email address
|
7. March 2007 @ 04:06 |
Link to this message
|
Thanks for reply Pacman - the drive is a 'NEC ND-2510A DVD drive'which has also been quoted as having the same problem on this site [http://forums.afterdawn.com/thread_view.cfm/378746]
I had Roxio Easy Creator bundled with the computer but I found it such a useless program I unistalled it, preferring Nero for most burning jobs; the only part of Roxio I kept was the Sonic Record Now as it doesn't try to hog my D drive as the full Roxio did.
As far as media is concerned I have been successfully using Tesco +format and -format discs and have never had even 1 coaster yet with them; for more 'important' jobs I've used TDK -format discs; and for storage and back-ups I've used Phillips + and - format DVD-RW's.
As I say I've never encountered any probs with any of these discs before.
Again thanks for help Pacman - I apologise if I don't reply quickly to answers but I have no internet access at home and have to rely on local library; this incidentally makes it difficult to download stuff that helps sort out these sorts of problems!
|
|
PacMan777
AfterDawn Addict
|
7. March 2007 @ 04:23 |
Link to this message
|
|
Forums aren't exactly known for punctual responses. Sounds as though you're familiar with software conflicts and what to look for. I may be wrong, but for media formats not being recognized (- or +) it looks beyond the software. Good luck.
|
|
SStrummer
Suspended due to non-functional email address
|
7. March 2007 @ 04:30 |
Link to this message
|
Cheers Pacman - I'll try every combination of removing and reinstalling programs and then run them through Nero using the 'Simulate' function for all my disc types.
Thanks again for reply
|
|
PacMan777
AfterDawn Addict
|
7. March 2007 @ 04:38 |
Link to this message
|
Originally posted by SStrummer:
Cheers Pacman - I'll try every combination of removing and reinstalling programs and then run them through Nero using the 'Simulate' function for all my disc types.
Thanks again for reply
Simplify that. Delete all the recording software so there won't be a conflict. Then load the free ImgBurn and try burning + and - with it. If it's still a no go, look to the media and burner compatibility.
|
|
laddyboy
AfterDawn Addict
|
7. March 2007 @ 04:59 |
Link to this message
|
Hello.
Have you tried going back to an earlier restore point when the burner still burned -R media. I had a NEC 2500 that also refused to burn -R media years ago. It didn't like the media and after I changed to Verbatim, it was fine. It still burns very well although it's semiretired. Usually though, when a burner fails to burn only one format of media, it's usually a hardware problem.
The only reliable, consistently high quality media are Verbatim and Taiyo Yuden. Made in Japan labeled media from Sony and Fuji are included since they likely will be Taiyo Yuden manufactured.
You might also try running the Nero Driver Clean Tool to remove any potentially offending drivers.
http://www.nero.com/nero6/enu/Driver_Cle...tryChecker.html
The 2510 is a pretty old drive and I doubt the firmware has been updated to handle newer media, especially 16X media. Since this drive was used as an oem drive, there are different firmware versions about.
http://forum.rpc1.org/dl_firmware.php?download_id=1837
Is your media 8X? If it's 16X, ty some 8X if you can find it.
Have you tried uninstalling the drive with Device Manager and then letting the OS reinstall it upon restart?
You could also do a physical uninstall/reset by disconnecting both the data and power cables and restarting your system a couple of times before reseating the cables.
If you have access to another system, take your burner out and install it in that other system. If it works there, you know it has something to do with your setup.
I don't use very much -R media myself, so this "feature" of your burner wouldn't bother me if I couldn't isolate the problem. Just be aware it could be a symptom of your burner heading the wrong direction. New ones are so cheap these days, you might want to consider retiring it, especially if you really need/want to use -R media.
|
|
SStrummer
Suspended due to non-functional email address
|
14. March 2007 @ 10:42 |
Link to this message
|
Thanks for the input laddyboy; I think I'm going to end up with egg on the face here! I thought my problem was with either the programs or even the burner ['cause I thought all discs were built to the same quality] but following advice here I've tried burning to TDK minus format discs and Verbatim 8X minus format discs and all is well!
Sorry if I've wasted your time folks but I guess it's a lesson learned for me [and anyone else reading this thread] - I checked through the Nero toolkit [didn't know what it was for until now]and it tells you in there if a disc CAN be burned to and if so at what speed.
I did have a problem with 16X discs a while ago but the ones that weren't burning were 8X tesco discs.
Cheers again for your help and saving me a load of wasted time and probably a few cock ups along the way.
|
|
Advertisement
|
|
|
|
laddyboy
AfterDawn Addict
|
14. March 2007 @ 11:54 |
Link to this message
|
|
OK, not a problem; that's what the forums are for.
|
|
