|
|
|
DVD Shrink fails after 1% of burning to blank disc
|
|
|
dcrusse
Newbie
|
10. August 2007 @ 14:04 |
Link to this message
|
I have been using DVD Shrink for a long time and I have never had a problem with it until I Installed a wireless router for high speed internet and wireless printer for my laptop. I have upgraded to nero 7 and uninstalled then reinstalled DVD Shrink. If anyone can give me some advice on drivers, firewall settings, router settings, etc.. I would greatly appreciate it.
|
|
Advertisement
|
 |
|
|
Moderator
1 product review
|
10. August 2007 @ 14:14 |
Link to this message
|
The error message you are getting from DVD Shrink would be helpful as well as the program(s) you are using to rip the disc with as well as the name of the movie.
|
|
dcrusse
Newbie
|
10. August 2007 @ 15:47 |
Link to this message
|
After I encode the movie and DVD shrink ejects the movie and asks for the blank cd, I insert the blank cd however, it only gets to 1%...stalls for about 3 mins...then ejects the disc saying burning failed. It is doing this to EVERY movie I try which has been about 10 movies. This is the log I recieved on the last failed burn:
1C83-7221-10E5-477X-405C-3740-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 12:43:16 PM
NT-SPTI used
Nero API version: 7.10.1.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 10, 1, 0
Recorder: DVD RW DRU-710A> Version: BYX5 - HA 1 TA 1 - 7.10.1.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD+-RW ND-3530A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160828AS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-3530A D: CdRom0
SONY DVD RW DRU-710A E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1014MB (1038412kB)
Free physical memory: 387MB (396796kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.8.2007
NeroAPI
7:37:37 PM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started
7:37:37 PM #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)
7:37:37 PM #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
7:37:37 PM #4 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
7:37:37 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
7:37:38 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
7:37:38 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
7:37:38 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
7:38:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1910111 (424:28.11, 3730MB)
7:38:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO
7:38:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
7:38:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
7:38:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1910112 (1910112) = #1910112/424:28.12
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1910112 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
7:38:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3911909376, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1910112 | 0 | 0x00
1910112 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:38:00 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
7:38:00 PM #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
7:38:00 PM #17 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
7:38:00 PM #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
7:38:00 PM #19 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
7:38:00 PM #20 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 4x (5,540 KB/s)
7:38:00 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:38:00 PM #22 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
7:38:00 PM #23 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
7:38:00 PM #24 Text 0 File Cdrdrv.cpp, Line 9869
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:38:00 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
7:38:34 PM #26 Text 0 File Cdrdrv.cpp, Line 1352
19:38:34.000 - E: SONY DVD RW DRU-710A : Queue again later
7:40:48 PM #27 SPTI -500 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 04 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x05100840: Len x10000
0x00 00 01 BA 44 00 1F 4A 54 9D 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 51 56 C5 88 A5 95 11 83 EC
0x08 A7 17 06 A1 0D 95 28 65 B2 84 A2 94 15 1A 0C
7:40:49 PM #28 SPTI -1023 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 04 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
Buffer x03ff4180: Len x10000
0x00 00 01 BA 44 00 1F 4A 54 9D 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 51 56 C5 88 A5 95 11 83 EC
0x08 A7 17 06 A1 0D 95 28 65 B2 84 A2 94 15 1A 0C
7:40:49 PM #29 CDR -1023 File Writer.cpp, Line 303
Command sequence error
E: SONY DVD RW DRU-710A
7:40:50 PM #30 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 1023 (3FFh)
7:40:50 PM #31 Phase 38 File APIProgress.cpp, Line 285
Burn process failed at 4x (5,540 KB/s)
7:40:50 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
7:40:50 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
7:40:50 PM #34 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:40:52 PM #35 Text 0 File Cdrdrv.cpp,
|
|
dcrusse
Newbie
|
10. August 2007 @ 17:46 |
Link to this message
|
Originally posted by dcrusse:
After I encode the movie and DVD shrink ejects the movie and asks for the blank cd, I insert the blank cd however, it only gets to 1%...stalls for about 3 mins...then ejects the disc saying burning failed. It is doing this to EVERY movie I try which has been about 10 movies. This is the log I recieved on the last failed burn:
1C83****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 12:43:16 PM
NT-SPTI used
Nero API version: 7.10.1.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 10, 1, 0
Recorder: DVD RW DRU-710A> Version: BYX5 - HA 1 TA 1 - 7.10.1.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD+-RW ND-3530A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160828AS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-3530A D: CdRom0
SONY DVD RW DRU-710A E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1014MB (1038412kB)
Free physical memory: 387MB (396796kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.8.2007
NeroAPI
7:37:37 PM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started
7:37:37 PM #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)
7:37:37 PM #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
7:37:37 PM #4 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
7:37:37 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
7:37:38 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
7:37:38 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
7:37:38 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
7:38:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1910111 (424:28.11, 3730MB)
7:38:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO
7:38:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
7:38:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
7:38:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1910112 (1910112) = #1910112/424:28.12
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1910112 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
7:38:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3911909376, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1910112 | 0 | 0x00
1910112 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:38:00 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
7:38:00 PM #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
7:38:00 PM #17 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
7:38:00 PM #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
7:38:00 PM #19 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
7:38:00 PM #20 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 4x (5,540 KB/s)
7:38:00 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:38:00 PM #22 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
7:38:00 PM #23 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
7:38:00 PM #24 Text 0 File Cdrdrv.cpp, Line 9869
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:38:00 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
7:38:34 PM #26 Text 0 File Cdrdrv.cpp, Line 1352
19:38:34.000 - E: SONY DVD RW DRU-710A : Queue again later
7:40:48 PM #27 SPTI -500 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 04 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x05100840: Len x10000
0x00 00 01 BA 44 00 1F 4A 54 9D 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 51 56 C5 88 A5 95 11 83 EC
0x08 A7 17 06 A1 0D 95 28 65 B2 84 A2 94 15 1A 0C
7:40:49 PM #28 SPTI -1023 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 04 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
Buffer x03ff4180: Len x10000
0x00 00 01 BA 44 00 1F 4A 54 9D 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 51 56 C5 88 A5 95 11 83 EC
0x08 A7 17 06 A1 0D 95 28 65 B2 84 A2 94 15 1A 0C
7:40:49 PM #29 CDR -1023 File Writer.cpp, Line 303
Command sequence error
E: SONY DVD RW DRU-710A
7:40:50 PM #30 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 1023 (3FFh)
7:40:50 PM #31 Phase 38 File APIProgress.cpp, Line 285
Burn process failed at 4x (5,540 KB/s)
7:40:50 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
7:40:50 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
7:40:50 PM #34 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:40:52 PM #35 Text 0 File Cdrdrv.cpp,
|
Moderator
1 product review
|
11. August 2007 @ 04:47 |
Link to this message
|
Quote:
After I encode the movie and DVD shrink ejects the movie and asks for the blank cd
Firstly, this requires a DVD...not a CD
Quote:
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: Off
Your DMA should be enabled for both drives.
Quote:
Disc Manufacturer: RITEKF - 1
Cheap discs...I would recommend Verbatim or Taiyo Yuden. Verbatims will be on sale next week at Best Buy 50 for $12.
Quote:
DVD RW DRU-710A> Version: BYX5
You have the most current version of firmware for your drive, but it two years old and in the future will show less and less compatability with new media. I would use the NEC, mine is still going strong.
It would be handy to see the end of the log to see what drivers are loading while you burn.
|
|
dcrusse
Newbie
|
11. August 2007 @ 06:27 |
Link to this message
|
Of course I am using DVD discs and not CD discs. Like I said I have been using shrink and nero for a long time.
As far as the DMA is concerned, I tried to work with it a little but I can't understand anything about it.
There are 2 Primary IDE Channel Properties:
On the first one, both transfer modes are on DMA if available.
Device 0, The current transfer mode is on Ultra DMA mode 2.
Device 1, The current transfer mode is on PIO mode which I believe it should not be on.
On the second one, both transfer modes are on DMA if available.
Device 0, The current transfer mode is on Ultra DMA mode 5.
Device 1, The current transfer mode is on Not Applicable.
The second IDE Channel Properties:
Device 0 & 1, both transfer modes are on DMA if available.
Device 0 & 1, both current transfer modes are on Not Applicable.
I have 2 Primary IDE Channel properties:
First one - Device Usage, it is enabled.
Second one - Device Usage, it is shadowed not allowing me to select it. No words are in the shadowed part.
The second IDE Channel Properties:
Device Usage, it is enabled.
Under the driver tab, the driver is 5.1.2600.2180
The Driver for the NEC DVD+-RW ND-3530A and the SONY DVD RW DRU-710A is 5.1.2535.0
I hope that's what you are asking about if not please let me know. You mentioned you needed more info from the log I sent, I copy/pasted the entire log.
One more thing, When I uninstalled and reinstalled DVD Shrink and Upgraded to Nero 7, When I go to Backup/Target Device/Select Backup Target now I am seeing the NEC and the SONY drive. Before only the Sony drive showed up and I believe that it is because The sony is the master and the NEC is the slave. Please tell me your thoughts on that.
|
Moderator
1 product review
|
12. August 2007 @ 04:06 |
Link to this message
|
Quote:
On the first one, both transfer modes are on DMA if available.
Device 0, The current transfer mode is on Ultra DMA mode 2.
Device 1, The current transfer mode is on PIO mode which I believe it should not be on.
Correctamundo...here is a guide. I think this should fix your problem.
This message has been edited since posting. Last time this message was edited on 12. August 2007 @ 05:17
|
|
dcrusse
Newbie
|
12. August 2007 @ 05:14 |
Link to this message
|
|
That sends me to a lot of different forums. Is there one in particular you want me to look at.
|
Moderator
1 product review
|
12. August 2007 @ 05:16 |
Link to this message
|
|
|
dcrusse
Newbie
|
12. August 2007 @ 06:01 |
Link to this message
|
I did exactly what the link told me to. I uninstalled the primary ide channel properties that was showing PIO mode. I restarted the computer, it recognized the new hardware, reinstalled it, and put both devices in PIO mode. I changed both to DMA if available and restarted the computer. After reboot I checked the condition and the device 1 is still in PIO mode. However, I tried to burn movies with the NEC and it does work. It even works faster than the SONY ever did. I don't understand why it worked before I hooked the wireless router up and wireless printer.
I guess since it worked before, even though I have another burner, I still want the other one to work again.
|
Moderator
1 product review
|
12. August 2007 @ 06:10 |
Link to this message
|
|
Should have nothing to do with your wireless connections. Data transfer mode switches from DMA to PIO after "x" amount of read errors...I believe it is six. If the transfer mode cannot be changed then the drive may be bad and need replacing.
|
|
dcrusse
Newbie
|
12. August 2007 @ 06:27 |
Link to this message
|
I had the SONY drive for a couple of years. Since I've had it I burned about 350 dvd's. I have over 700 dvd's total. That is a lot of burning so I wouldn't doubt that the burning is going up. Thank you for all your help. What's done is done. But like I said, the NEC is faster than the SONY. NO BIGGY!
|
|
Advertisement
|
|
|
Junior Member
|
12. August 2007 @ 14:35 |
Link to this message
|
I see your copy speed for the DVD- is set at the right speed, did you or have you ever cleaned the burner by using a DVD cleaner, might be some dust, you could also check the next burn by doing this, open and start DVD Shrink and select the read drive and burn drive for NEC burner, I have 4 burners and every once in a while I have to use 1 of the others to do the burn, I noticed also that you reinstalled NERO or did an upgrade, well NERO dosnt come with the ASPI drives for DVD Shrink anymore it has its own, there is a NERO tool to see if you have the ASPI drives installed, when you run the app. it will show NERO ASPI working, Windows NOT WORKING so you have to download and install new ASPI drivers for Windows
http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm
hope this will work for you,
|
|
