|
|
|
DVD shrink stopped working/changed settings
|
|
|
skylar
Newbie
|
12. August 2007 @ 14:53 |
Link to this message
|
so I had been backing things up occasionally with DVDshrink 3.2 and Nero for quite a few months.
recently I tried to back something up and the settings on DVDshrink had all seemingly changed by themselves.
it will no longer let me select "perform deep analysis", it tells me that there is no enough space in the folder selected (even though there is), and won't let me choose to burn with Nero on the last screen in the popup that starts after clicking "Backup!"
has anyone else had a similar problem or would know why this is happening?
|
|
Advertisement
|
|
|
|
|
onya
Suspended permanently
|
12. August 2007 @ 15:20 |
Link to this message
|
Being as Shrink is freeware and always will be, my thoughts are to Un-install shrink and run a cleaner like CrapCleaner (freeware) in Issues mode. Make a restart then download Shrink, make another restart and then re-adjust the settings to Shrink. Running a cleaner AND the restarts, are essential so don't skip them ok?
To make your short story a little longer, Shrink and other freeware apps are now no longer supported. You MAY need altenatives to Rip files etc. We can help with the software and guides if you need them.
|
|
skylar
Newbie
|
12. August 2007 @ 15:22 |
Link to this message
|
|
Thanks for the advice. I'll give the system a good clean and see what happens.
|
|
skylar
Newbie
|
12. August 2007 @ 17:00 |
Link to this message
|
okay, uninstalled. restarted. cleaned the system with that freeware tool. restarted. reinstalled dvdshrink. the options came back, but I got this burn error:
1C82-0000-19E5-MAAX-4001-2032-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 5, 9, 0
Recorder: Version: 2.F9 - HA 1 TA 1 - 7.5.9.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : MAD DOG MD-16XDVD9 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163B D: CDRom0
MAD DOG MD-16XDVD9 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2045MB (2095084kB)
Free physical memory: 1655MB (1695112kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.8.2007
NeroAPI
7:57:41 PM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started
7:57:41 PM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)
7:57:41 PM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
7:57:41 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
7:57:41 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
7:57:41 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
7:57:41 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
7:57:41 PM #8 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
7:57:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2097983 (466:13.08, 4097MB)
7:57:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
7:57:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
7:57:42 PM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:57:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2097984 (2097984) = #2097984/466:13.9
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2097984 blocks [E: MAD DOG MD-16XDVD9]
--------------------------------------------------------------
7:57:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [E: MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4296671232, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2097984 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2097984 | 0 | 0x00
2097984 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:57:42 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:57:42 PM #16 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
7:57:42 PM #17 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
7:57:42 PM #18 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
7:57:42 PM #19 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 2.4x (3,324 KB/s)
7:57:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:57:42 PM #21 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode
7:57:42 PM #22 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: Yes
7:57:42 PM #23 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:57:42 PM #24 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 20 03 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
7:57:42 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1779
Illegal disc
E: MAD DOG MD-16XDVD9
7:57:42 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779
Could not perform start of Disc-at-once
7:57:42 PM #27 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 2.4x (3,324 KB/s)
7:57:42 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
7:57:42 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
7:57:42 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:57:44 PM #31 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
7:57:44 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2/22/2007 11:29:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 2/22/2007 11:29:52 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
onya
Suspended permanently
|
12. August 2007 @ 17:53 |
Link to this message
|
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : MAD DOG MD-16XDVD9 atapi Port 1 ID 1 DMA: On
Turn the DMA to this devise ON. everything helps.
Quote:
Disc Manufacturer: CMC MA - G. AM3
CMC are CRAP media. Try Verbatims etc..
Quote:
Burn process failed at 2.4x (3,324 KB/s)
I really dont see a problem with this speed, although it's a little TOO slow for my likeing. 4X or 8X are often better.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
13. August 2007 @ 15:35 |
Link to this message
|
Do as Onya posted,reset the dma's and get some verbatim blank media.
Also beware of burning slow. Keep it at 4x-8x. If you get verbatim,keep the burn at 8x.
Then double check your dvd shrink settings. I'm guessing that you are autoburning with Nero,so make sure your settings are like this:
Open up dvd shrink/edit/preferences. Click the File/IO tab and look under the burn setting. Make sure the box is ticked for Enable burning with nero and OK. This should stay at that setting.
Then insert backup disc,open disc,let it analyze and reauthor or entire disc-whichever you do. Then when you click Backup,double check those settings,especially Target Device.
For autoburning with nero: Click the V to the right of select backup target and scroll,and set it like mine with the squiggly red circle. Your drive/model should be listed as well as a check mark. Your's may be set to harddisc folder or ISO image.
Double check Select folder for temp files,make sure it's going to a hd that has the space available.
Double check the rest of settings,when you click ok,process starts and should stay that way.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
|
