|
psp pandoras battery error
|
|
|
donilla
Junior Member
|
1. October 2007 @ 13:54 |
Link to this message
|
|
hi i keep getting an error in the cmd on my computer when i try to execute the msipl.bin i do everything right i put the msipl.bin in the same folder as the msipl.exe and i try to execute it but it keeps saying error 0x00000000 in Device Io control please someone help i really need top unbrick my other psp thanks and also when i try to use the mspformat it says "Logical drive has more than a physical drive cannot handle it. i am currently running windows xp and i have two drives drive c:/ and drive D:/ should i install windows xp operating system again or what thanks
|
|
Advertisement
|
 |
|
|
|
MonoSoft
Member
|
5. October 2007 @ 06:34 |
Link to this message
|
|
Ok run me through what you have done whilst trying to make a pandora's battery and ill help you fix this problem also while your at it, make sure you have a spare battery, or backup your battery's information (serial number) using Pandora's Battery Creator App on the psp
if you have all that, please proceed in telling me this command prompt problem you're having
PSP, Custom: Crystal Faceplate and UMD Door, Black Backplate
MotherBoard = TA-086 MB(25/12/2005)3.80 M33-5
|
|
donilla
Junior Member
|
6. October 2007 @ 01:03 |
Link to this message
|
Originally posted by MonoSoft:
Ok run me through what you have done whilst trying to make a pandora's battery and ill help you fix this problem also while your at it, make sure you have a spare battery, or backup your battery's information (serial number) using Pandora's Battery Creator App on the psp
if you have all that, please proceed in telling me this command prompt problem you're having
well, all i do is extract the pandora file into drive c and then i open drive c once its done extracting and i go to mspformat folder i open it up and theres the mspformat.exe i drag that to the cmd and i type in my psp drive "I" and a message comes up saying local drive has more than physical drive cannot handle it. then i just try formatting it in windows by right clicking on the psp drive and format without the qick format box checked i move on to the pandora battery firm installer everything goes well and i get a new folder called msipl.bin when i try to execute this in cmd it dosent work. i copy the file that was just made into c:/pandora/msipl. i open up a cmd and type cd ..
cd ..
cd pandora
cd msipl
then type msipl X msipl.bin ? where X is the letter of your PSP drive
this is what happens
C:\\pandora\msipl>msipl I msipl.bin
PSP MS IPL Installer
Load IPL code msipl.bin
241664 bytes (59 block) readed
error 0x000000 deviceIo in control
please help me i alos have a fake memory stick so could you tell me if thats a problem.
thanks
This message has been edited since posting. Last time this message was edited on 6. October 2007 @ 01:04
|
|
MonoSoft
Member
|
6. October 2007 @ 01:16 |
Link to this message
|
|
take msinst.exe and mspformat.exe and put both of those files into the C:\ folder dont bother with the whole drag and drop it just complicates things.
as long as you have these three files in your C:\ directory(not in a folder inside C:\) you'll be fine:
-msinst.exe (file not folder)
-mspformat.exe (File not folder)
-the msipl.bin that you extracted after installing the pandora's battery onto your memory stick
once doing those things, go to your "run.." menu on Start then type cd c:\ then enter. then type the commands mspformat xmb[my drive is F so i type "mspformat F"], this function formats the memory stick, then if your battery is all installed and working, connect the psp to a computer and drag the msipl.exe to C:\ and type in the cmd, "msinst XMB msipl.bin"
PSP, Custom: Crystal Faceplate and UMD Door, Black Backplate
MotherBoard = TA-086 MB(25/12/2005)3.80 M33-5
|
|
MonoSoft
Member
|
6. October 2007 @ 01:30 |
Link to this message
|
|
sorry mistake there, msipl.bin i ment ^_^
shouldn't make everything a difficulty for yourself, if you just move the two programs mspformat.exe and msinst.exe to C:\ everythings far easier, also the command you type for converting the memory stick (msipl.bin) is actually msinst X msipl.bin, NOT msipl X msipl.bin
PSP, Custom: Crystal Faceplate and UMD Door, Black Backplate
MotherBoard = TA-086 MB(25/12/2005)3.80 M33-5
|
Junior Member
|
6. October 2007 @ 01:35 |
Link to this message
|
Originally posted by donilla:
well, all i do is extract the pandora file into drive c and then i open drive c once its done extracting and i go to mspformat folder i open it up and theres the mspformat.exe i drag that to the cmd and i type in my psp drive "I" and a message comes up saying local drive has more than physical drive cannot handle it. then i just try formatting it in windows by right clicking on the psp drive and format without the qick format box checked i move on to the pandora battery firm installer everything goes well and i get a new folder called msipl.bin when i try to execute this in cmd it dosent work. i copy the file that was just made into c:/pandora/msipl. i open up a cmd and type cd ..
cd ..
cd pandora
cd msipl
then type msipl X msipl.bin ? where X is the letter of your PSP drive
this is what happens
C:\\pandora\msipl>msipl I msipl.bin
PSP MS IPL Installer
Load IPL code msipl.bin
241664 bytes (59 block) readed
error 0x000000 deviceIo in control
please help me i alos have a fake memory stick so could you tell me if thats a problem.
thanks
Donilla, The problem that you are having is that you haven't typed in the directory properly as you were suopposed to so here's what you are ment to do:
copy the msinst.exe file to you local disk drive C:/
Now on your computer go to start, then run, and type in cmd.
A littie black box should appear saying C:/, if not it'll say. C:/ users/X (X meaning the users name)/documents and settings.
Now if it says C:/, it should look like this: C:/msinst.exe X (X as in your PSP drive letter), X:\msipl.bin
Now it should say sayin all these kind of stuff.
Just press "y" and it should then say "Write Boot code". You then have a magic memstick!!!!
Note: This will only work until AFTER you logically formated your memstick if you get a error like "logical drive has more than a physical drive and cannot handle it" then it won't work due to a fake memstick.
If you need a more simplyfied breakdown I'll PM you.
My PSP life: 1.50>2.00>2.71>3.03> 3.30(Noooo!!!)>3.50>3.50HEN>1.50>3.40OE-A>3.52M33>1.50.3.40OE-A>3.52M33>3.52M33-4>1.50>3.40OE-A>3.52>3.52M33-4
Plainin to get the slim (moddified) BUT IT THE ONLY THING IS THAT IT HAS NO 1.50 KERNEL!{^_^}
|
|
MonoSoft
Member
|
6. October 2007 @ 01:41 |
Link to this message
|
|
anyways post another thread if you get any more problems, or same problems ^_^ im here to help ya
PSP, Custom: Crystal Faceplate and UMD Door, Black Backplate
MotherBoard = TA-086 MB(25/12/2005)3.80 M33-5
|
Junior Member
|
6. October 2007 @ 02:01 |
Link to this message
|
My PSP life: 1.50>2.00>2.71>3.03> 3.30(Noooo!!!)>3.50>3.50HEN>1.50>3.40OE-A>3.52M33>1.50.3.40OE-A>3.52M33>3.52M33-4>1.50>3.40OE-A>3.52>3.52M33-4
Plainin to get the slim (moddified) BUT IT THE ONLY THING IS THAT IT HAS NO 1.50 KERNEL!{^_^}
|
|
donilla
Junior Member
|
6. October 2007 @ 08:55 |
Link to this message
|
|
so basically its because my MS is fake
thanks for the help ill get back to you as soon as i get a real MS
thanks for the help anyway
|
Senior Member
|
6. October 2007 @ 10:14 |
Link to this message
|
|
|
Junior Member
|
6. October 2007 @ 21:39 |
Link to this message
|
Originally posted by wichozzz:
format u mem on windows the put all this inside.
...a magic memory
http://www.sendspace.com/file/04s1jd
now u only need create ""the magic battery""
hope this help
Wichozzz, He won't need that as the GUI i already posted makes the memstick.
My PSP life: 1.50>2.00>2.71>3.03> 3.30(Noooo!!!)>3.50>3.50HEN>1.50>3.40OE-A>3.52M33>1.50.3.40OE-A>3.52M33>3.52M33-4>1.50>3.40OE-A>3.52>3.52M33-4
Plainin to get the slim (moddified) BUT IT THE ONLY THING IS THAT IT HAS NO 1.50 KERNEL!{^_^}
|
|
donilla
Junior Member
|
7. October 2007 @ 08:04 |
Link to this message
|
u lot please help me i really have to unbrick my brothers psp i tryed all the ways the u lot explained but it keeps saying logical drive has more than physical drive even though the mem stick is genuine in psp it says its supported by magic gate in the gui it keeps skipping the format bit and a message pops up saying your memory stick will be modified and i press ok when i go to my psp all the files r there i just dont know what to do i am currently on version 3.52 m33-2 and i have the apple core theme plz help should i use a diffrent computer or what plz help. the mem stick im using is 256mb.
This message has been edited since posting. Last time this message was edited on 7. October 2007 @ 08:13
|
|
MonoSoft
Member
|
7. October 2007 @ 11:47 |
Link to this message
|
First, download this folder, i dont care if you already have it, just download this one to make sure there's nothing wrong with it
do everything in this order
Firstly, creating a magic memory stick:
-turn your psp on whilst holding R to enter recovery menu
-go onto your configuration settings and make sure you are running 3.xx Kernel
-exit recovery
-go to systems/ format memory stick-usb connect on the pc, open the folder "MSPFORMAT" in the pandora's battery folder and drag the file MSPFORMAT.EXE to the C:\ directory (it has to be in C:\!)
-go on the start menu->Run..->cmd and you get the scary screen, type cd c:\ press enter a new line appears saying "C:\" then type mspformat.exe X (where X is your drive) then when prompted press Y once and enter then wait a few seconds
-then it is complete, remove the memory stick and exit usb, then reinsert memory stick and connect back again to usb via PSP
-on the pc open "INSTALLER" and drag those two folders inside installer to the GAME150 folder on your memory stick
-remove the memory then exit USB mode
-reinsert the memory stick and flick over to the GAME->Memory Stick directory, there should be pandora's battery installer there, run it
-press x, co-operate with all functions until it finishes, then remove memory stick and re-insert it and connect to usb mode
-drag the file created in the root memory of your psp "msipl.bin" STRAIGHT to your C:\ drive, no other folder
-go back to the pandora's battery files and open up the "MSINST" folder and drag the MSINST.EXE file to the C:\ directory on your PC, and also drag the file "MSIPL.BIN" to your C:\ directory, then go on Start->Run..->cmd...
-type cd c:\ and enter then type msinst X msipl.bin (where X is the PSP drive)then loads of scary things pop up, then just press Y and enter and violla! Magic Memory stick
Secondly, the Jigkick "Pandora's" Battery
far easier process:
-take the folders inside the BATTERY folder, and drag them to GAME150
-exit usb mode and go to GAME->Pandora's Battery Creator and run the program
-when it's up, press triangle (this backs up your Battery Serial in the form of eeprom.bin file) then it exits
-re-enter the program and press x this time, changing the serial of the battery to "0xFFFFFFFF" then it exits, and it's now a jigkick "Pandora's" battery!
to use these two devices to unbrick the bricked psp,
-put the memory stick in the bricked psp, then remove the AC lead and put the jigkick battery in.
-all lights will flash then a menu will pop up, just press x and let it downgrade the psp back down to 1.5 keep pressing x when PROMPTED until the psp shuts down.
-take your NORMAL PSP Battery and put that in with any memory stick (even the magic one) then turn it on, you should get the scary blue screen that appears when anyone downgrades, just press O and violla! unbricked psp on version 1.5! update to whichever CFW you wish ^_^
re-written by me..MonoSoft
Interpreted from Dark_AleX's orginal thread in MaxConsole.com
PSP, Custom: Crystal Faceplate and UMD Door, Black Backplate
MotherBoard = TA-086 MB(25/12/2005)3.80 M33-5
|
|
donilla
Junior Member
|
7. October 2007 @ 12:24 |
Link to this message
|
|
I followed your instruction but when i do the msinst T msipl.bin it says 0x00000000 in Device Io control.
this is what happens
psp ms ipl installer
load ipl code msipl.bin
241664 bytes(59 block) readed
error in deviceIocontrol
what am i doing wrong also the mspformat dosent work ive even tried the mspformat thing but it just keeps saying same thing :logical drive has more than a physical drive cannot handle it"
whats wrong its a genuine 256mb MS plz help.
I format the MS by right clicking on the psp drive and clicking format with the qick format box unchecked and i make it into a FAT.plz help what am i doing wrong.
This message has been edited since posting. Last time this message was edited on 7. October 2007 @ 12:28
|
|
MonoSoft
Member
|
7. October 2007 @ 13:29 |
Link to this message
|
|
lemme know if that helped you at all... just remember the command for the last MSDOS process, msinst X msipl.bin (not msipl X msipl.bin)
PSP, Custom: Crystal Faceplate and UMD Door, Black Backplate
MotherBoard = TA-086 MB(25/12/2005)3.80 M33-5
|
|
donilla
Junior Member
|
7. October 2007 @ 13:36 |
Link to this message
|
Originally posted by MonoSoft:
lemme know if that helped you at all... just remember the command for the last MSDOS process, msinst X msipl.bin (not msipl X msipl.bin)
i just cant unbrick it my logicalformat wont work and that error 0x000000 in deviceIocontrol it just wont work
|
Senior Member
|
7. October 2007 @ 15:05 |
Link to this message
|
|
|
|
donilla
Junior Member
|
8. October 2007 @ 06:48 |
Link to this message
|
Originally posted by wichozzz:
http://www.sendspace.com/file/04s1jd
(phat)
put all on u own mem stick
then.....u pandora's magic memory stick
forget all about dos:/ command.???
this work vey well, go for it.!!
so your saying to format my mem stick on windows with the qick format box unchecked
|
|
donilla
Junior Member
|
9. October 2007 @ 10:06 |
Link to this message
|
|
when you put the magic memstick in is it meant to flash because on mine it dosent flash at all
|
Member
|
9. October 2007 @ 14:34 |
Link to this message
|
|
Place the magic MS in first, and then place the battery in and it should boot up into the pandora's menu. Anyway, the power light should be solid and the MS light and Wi-Fi light should be on, and possibly the MS light should be flashing. Not sure.
-------- --------
.rave
|
|
donilla
Junior Member
|
11. October 2007 @ 09:31 |
Link to this message
|
Originally posted by wichozzz:
http://www.sendspace.com/file/04s1jd
(phat)
put all on u own mem stick
then.....u pandora's magic memory stick
forget all about dos:/ command.???
this work vey well, go for it.!!
i formatted my Ms on psp then on windows with qick format box unchecked i created the jig kick battery but the MS will not flash and it just stays on tell me what im doin wrong.
|
|
MonoSoft
Member
|
11. October 2007 @ 15:20 |
Link to this message
|
|
did you make a magic memory still too? containing all the files, then running the "msinst X msipl.bin" on Start->Run... on the pc?
that's the only way to make the magic memory stick have it's "magic" by doing that last important part on the pc at the end...
shocking that it didn't work..just dont panic... im sure we'll find the route of the problem shortly...
PSP, Custom: Crystal Faceplate and UMD Door, Black Backplate
MotherBoard = TA-086 MB(25/12/2005)3.80 M33-5
|
|
MonoSoft
Member
|
11. October 2007 @ 15:25 |
Link to this message
|
|
and also, yes every single light should turn on on the psp, the wifi, memory stick and power lights
all three.
atleast you managed to create a pandora's battery..well o_O i hope anyways, follow my instructions up there for a good guide on how to make the magic memory stick.. and you should have yourself a downgraded fresh psp, any further questions, keep asking, also if you could copy and paste from the MSDOS window next time you get an error when typing the "msinst X msipl.bin" function so i can try figure out what the exact problem is...
PSP, Custom: Crystal Faceplate and UMD Door, Black Backplate
MotherBoard = TA-086 MB(25/12/2005)3.80 M33-5
|
|
adyau
Suspended due to non-functional email address
|
11. October 2007 @ 15:30 |
Link to this message
|
|
didnt work for me the bricked psp screen still just flashes ive ran pandora and downgraded but still nowt
1st psp ta082 2.71-1.50-3.03oethis is my 8yr olds
2ndpsp 2.00 .2.71 -1.50-2.00.1.50-303oe,340oe,mine
|
|
Advertisement
|
|
|
Senior Member
|
12. October 2007 @ 08:32 |
Link to this message
|
|
do u want know the best option for pefect Pandora's (magic stick)
put u memory card and card reader
****************************************
DOS C:\mspformat L or H) card reader drive
are you to format drive L
all data will be lost Do you want to continue [Y] Y
put all folders folder on PSP/GAME/pandora_battery & pandora _battery%
this too: pbfirm_install & pbfirm_install%
then click to pandora install on psp
To create the msipl.bin file
now put the memory on card reader and use dos key again
c:\msinst\msinst L mispl.bin (enter)key
PSP MS IPL INSTALLER
load IPL code msipl.bin
Are You Sure? [Y] Y
Write MS BOOT CODE
*****************************************
...now u create u magic memory card.
now put again the memory card on psp
and run the pandora batt to create u own JigKick Battery
choice backup to battery (to restore later)
then (X) to create
..now u got all
ready to use...try
hope this help.!!!
|
