|
Error message: failed to read file because of I/O error
|
|
|
Weasrock
Member
|
21. June 2008 @ 18:16 |
Link to this message
|
Trying to burn top spin 3 and I've made 3 coasters with IMG burn d/t this error message. what is this? made hundreds of successful burns. it crashes at 21% everytime
|
|
Advertisement
|
 |
|
|
Senior Member
|
21. June 2008 @ 19:21 |
Link to this message
|
Hi, try creating the image with schtrom extract 360 instead of imgburn and see if it still freezes. I use this program as a backup incase i have problems with imgburn..
Q9550@4.0ghz,Gigabyte EP45-UD3P,OCZ Vendetta 2 cooler,VisionTek 4870X2,1TB Samsung Spinpoint SATA/3GB,4GB G.Skill DDR2 1066,LG Blu-ray/HDDVD combo drive,Corsair HX-1000 Modular,Hannspree 28" LCD,Coolermaster Cosmos S
http://valid.canardpc.com/show_oc.php?id=473095
2 Xbox 360 Jaspers(flashed w/Ixtreme LT), PS3, Wii
Samsung 4071,Samsung 4095, Samsung 245BW LCD Displays |
Senior Member
1 product review
|
22. June 2008 @ 00:26 |
Link to this message
|
Also try CloneCD. That always works.
|
|
Weasrock
Member
|
24. June 2008 @ 20:56 |
Link to this message
|
guys I have tried clone cd and its doing the same thing. why would this start happening. I have a benq drive that has worked fine until now. I can't keep making coasters like this and it has to be my drive right? what the hell does I/O error mean anyway? HELP!!!
|
Moderator
1 product review
|
24. June 2008 @ 21:04 |
Link to this message
|
An I/O error is a hardware error, it means Input/Output and means that either there is a problem with your drive or your drive can't handle your media. What brand discs are you using? Post a log from Imgburn--->Help/Imgburn Logs
|
|
Weasrock
Member
|
24. June 2008 @ 21:24 |
Link to this message
|
I'm using verbatims and made sure they were from singapore. Here is the log:
03:04:02 Source File: I:\Xbox Isos\strange-ts3.dvd
I 03:04:02 Source File Sectors: 3,825,924 (MODE1/2048)
I 03:04:02 Source File Size: 7,835,492,352 bytes
I 03:04:02 Source File Volume Identifier: XGD2DVD_NTSC
I 03:04:02 Source File Volume Set Identifier: 34672923
I 03:04:02 Source File Implementation Identifier: Sonic Scenarist 3.1
I 03:04:02 Source File File System(s): ISO9660, UDF (1.02)
I 03:04:02 Destination Device: [0:1:0] BENQ DVD DD DW1640 BSRB (E:) (ATA)
I 03:04:02 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 8x)
I 03:04:02 Destination Media Sectors: 4,173,824
I 03:04:02 Write Mode: DVD
I 03:04:02 Write Type: DAO
I 03:04:02 Write Speed: 2.4x
I 03:04:02 Link Size: Auto
I 03:04:02 Test Mode: No
I 03:04:02 OPC: Yes
I 03:04:02 BURN-Proof: Enabled
I 03:04:02 Book Type Setting: DVD-ROM
I 03:04:02 Advanced Settings - OverSpeed: No, Solid Burn (K/U): No / Yes, WOPC: Yes
I 03:04:19 Optimal L0 Data Zone Capacity: 1,913,760
I 03:04:19 Optimal L0 Data Zone Method: Copied From Original Disc
I 03:04:20 Filling Buffer... (20 MB)
I 03:04:22 Writing LeadIn...
I 03:04:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)
I 03:04:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)
I 03:04:33 Writing Layer 0... (LBA: 0 - 1913759)
E 03:14:55 Failed to read from file: strange-ts3.iso
E 03:14:55 Reason: The request could not be performed because of an I/O device error.
I 03:14:56 Synchronising Cache...
I 03:15:04 Closing Track...
I 03:15:07 Finalising Disc...
E 03:26:11 Failed to Write Image!
E 03:26:12 Operation Failed! - Duration: 00:22:09
|
Moderator
1 product review
|
24. June 2008 @ 22:07 |
Link to this message
|
Try it again at 4X....first put the failed burn in and set Imgburn mode to "read" and copy and paste the info from right window here.
EDIT:
Quote:
E 03:14:55 Failed to read from file: strange-ts3.iso
Could be your HDD is about to take a nose dive...might want to check it for errors.
This message has been edited since posting. Last time this message was edited on 24. June 2008 @ 22:09
|
|
Weasrock
Member
|
24. June 2008 @ 22:16 |
Link to this message
|
here is the read info:
BENQ DVD DD DW1640 BSRB (ATA)
Current Profile: DVD+R DL
Disc Information:
Status: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 3,015,520
Free Space: 6,175,784,960 bytes
Free Time: 670:08:70 (MM:SS:FF)
Physical Format Information (ADIP):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (Last Recorded):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,110,367
|
|
Weasrock
Member
|
25. June 2008 @ 09:36 |
Link to this message
|
|
BTW, what does it mean if my burner can burn successfully at higher speeds such as 6x but fails at 2.4 or 4x? and does burning at higher speeds have any impact on the game itself as far as the 360 being able to read it, skipping,freezing etc? I know the recommended is 2.4x
This message has been edited since posting. Last time this message was edited on 25. June 2008 @ 09:43
|
|
NasirJns
Suspended due to non-functional email address
|
25. June 2008 @ 13:35 |
Link to this message
|
What version of Imgburn are you using? I had the same issue with burning. If you're using version 2.4 remove it and install version 2.3.
In the beginning I thought it was my dvd burner. Then I thought it was the dvds because I had created 5 coasters. Finally I installed version 2.3 and burned at 4x. I never had a coaster ever since. None of my games skip or show lag. I don't know about burning any faster than that. But 4x is great!! with less wait. Hope this helps.
|
Moderator
1 product review
|
25. June 2008 @ 22:02 |
Link to this message
|
Originally posted by Weasrock:
BTW, what does it mean if my burner can burn successfully at higher speeds such as 6x but fails at 2.4 or 4x? and does burning at higher speeds have any impact on the game itself as far as the 360 being able to read it, skipping,freezing etc? I know the recommended is 2.4x
Sometimes burning too slow can be just as bad as burning too fast. Think of an open face fishing reel when it nests....and then think of a HDD spinning at optimal speeds, but the burner holding the data back because it has been told not accept it at a certain speed. I wouldn't burn over 4X and it was just a suggestion. The reason that I wanted the "read" info was to see if anything was actually burned to the disc...
Quote:
Disc Information:
Status: Incomplete
...and unfortunately it was so now you have a coaster. Earlier versions of Imgburn aren't supported, but if rolling back to another version gets you results then go for it. A new version should be hitting the streets soon anyway, but truthfully I don't think the version of the program has anything to do with your woes.
I know your drive is getting a little long in the tooth, but I'd rule out some other things before replacing it. If rolling back to an earlier version of Imgburn doesn't bring you joy you are welcome to post a complete log at the Imgburn forum to get help from the author himself.
|
|
Weasrock
Member
|
26. June 2008 @ 10:58 |
Link to this message
|
the drive that my Iso's were on was an external hard drive, so I moved the iso's to my desktop and burned from there and was successful. I don't know why but for some reason imgburn is now having problems reading my isos from this external drive. I can store and open files from this drive and have no problems but for some reason I get an I/O error when imgburn tries to read the iso from this??? Its a fairly new drive....9 months old and this has just started? I hate this. The quest to have no coasters is endless even when you think you've done everything to avoid it...
|
Moderator
1 product review
|
26. June 2008 @ 11:15 |
Link to this message
|
Check your connective cabling...they may be bad. USB 2 I assume?
|
|
Advertisement
|
|
|
|
Weasrock
Member
|
26. June 2008 @ 11:33 |
Link to this message
|
yes, USB. U may be right. Never even thought of that. Sometimes the obvious still needs stated
|
