|
Another XBOX FTP Problem Please help!
|
|
|
acg137
Newbie
|
7. February 2004 @ 18:18 |
Link to this message
|
|
Alright ive searched through all the forums like evryone else and im totally dumbfounded. I have my xbox and my laptop, and a t1 connection routed through a 5 port switch. I cant connect to my xbox though! i have the evox dash with settings
Static IP 192.168.0.200
Subnet 255.255.255.0
Default Gateway 192.168.0.0
I can connect to the internet because i am able to play HALO online. However i cannot ping or get into my box.
I was able to use a crossover to get into it but i want to be able to be on the internet and be able to get into it at the same time. Any advice would be awesome
I try using FlashFXP.
thanks
Adam
|
|
Advertisement
|
 |
|
|
|
acg137
Newbie
|
7. February 2004 @ 18:26 |
Link to this message
|
|
Im using WINXP Pro, and there is no firewall
Adam
|
|
peachymo
Member
|
8. February 2004 @ 00:37 |
Link to this message
|
|
i know this may seem mad but on the network cards
is internet share enabled for some reason i have to do that with mine or i can not connect my xbox its mad but i have to
|
|
acg137
Newbie
|
8. February 2004 @ 06:41 |
Link to this message
|
|
im not really sure hwat you mean, but im pretty sure my xbox can connect to the internet and m y computer because i can play halo online through xbconnect, (computer Program) what do you mean by internet share? want to give me a walkthrough?
Adam
|
|
peachymo
Member
|
8. February 2004 @ 08:17 |
Link to this message
|
|
ok your using winxp so
go to <my network places> <view network connections> and you will see local area connection right click on the one that you use to connect to the internet with
choose advanced tab and tick allow other network users to connect blah blah blah click ok ect
it may not work for you but its the only way i can maybe your aswel
either way it's worth a try
|
|
peachymo
Member
|
8. February 2004 @ 08:18 |
Link to this message
|
|
also i don't use a static ip address
not sure if it's the same for a router but mine goes through a hub and i set static ip to NO
|
AfterDawn Addict
|
8. February 2004 @ 08:33 |
Link to this message
|
|
wassup..
hmm...
does your switch have a dhcp server on your switch? if so, then you want to setup evolution x dashboard so it so Static ip = No, i have a four port router with a dhcp server.
Also, what are your network ips, gateway and so on in winxp? (go to My Network Places, View network connections, right click > Status
If you do use static ip, make sure you have the gateway and subnet set to your networks.
hope that helps
peace
seamonkey420
|
|
acg137
Newbie
|
8. February 2004 @ 09:12 |
Link to this message
|
|
The switch is DHCP. I have tried it with no static IP but i still cant connect. My network connection is as follows
IP : 168.122.212.195
Subnet: 255.255.255.0
Assigned By DHCP
Default Gateway 168.122.212.1
I tried out the internet sharing thing but that was good. so i still not sure, thanks for the help guys. please any other things you can think of. Its an auto sensing switch so i dont think anything is wrong with that. It has to be some network thing but i cant figure it out!
Adam
|
|
acg137
Newbie
|
8. February 2004 @ 09:26 |
Link to this message
|
|
i dont know if this helps but i just made a new boot cdrw with evolution x on it and this is the settings on it.
Network
Type DHCP
IP 10.66.212.221
Line 100/Full Duplex
Ethernet mac 00:50:F2:54:4F:49
Setup Network Yes
Use Static IP No
IP 192.168.0.3
Subnet 255.255.255.0
Default Gateway 192.168.0.1
DNS 0.0.0.0
DNS 0.0.0.0
the IP that it states, 10.66.212.221, is not my comp's IP. could this have something to do with it?
Adam
|
|
peachymo
Member
|
8. February 2004 @ 13:25 |
Link to this message
|
|
yes one of them needs to be the address of your network card on your pc maybe you will have to manually put in your pc network card it probly is the cd your using it's usually best to edit the evox.ini file first to your pc settings ect
|
|
acg137
Newbie
|
8. February 2004 @ 15:41 |
Link to this message
|
|
which one?
Adam
|
|
peachymo
Member
|
8. February 2004 @ 23:26 |
Link to this message
|
|
i've just noticed whats wrong
you don't use a crossover cable with a hub or router
its just the RJ-45 cable NOT crossover
|
|
acg137
Newbie
|
9. February 2004 @ 04:17 |
Link to this message
|
|
alright i can change that easily. SO what should be my settings? Ill just change it in the evox.ini file
Thanks for all the help. oh and static IP off or on
Adam
|
|
peachymo
Member
|
9. February 2004 @ 04:30 |
Link to this message
|
|
still choose no for a static ip address
some routers auto find xbox ip's aswell try it with the settings that you did before cause it will just have been the cable
with the right cable it will find
|
|
acg137
Newbie
|
9. February 2004 @ 09:01 |
Link to this message
|
|
ok i get it. quick question though. My ip on my comp constantly changes, however in the xbox it always says 10.66.212.221. So should the default gateway be this ip or the one my comp is on at the moment?
Adam
|
|
acg137
Newbie
|
9. February 2004 @ 09:02 |
Link to this message
|
|
im sorry for all these questions and i really appreciate the help. so what should be the same? the subnet and the default gateway should be the same as i have on my comp?
Adam
|
|
THE-DUCK
Newbie
|
19. February 2004 @ 15:37 |
Link to this message
|
|
[quote}i've just noticed whats wrong
you don't use a crossover cable with a hub or router
its just the RJ-45 cable NOT crossover
ok AN RJ-45 CABLE AND A CROSSOVER CABLE ARE THE SAME IT IS MOST COMMONLY CALLED A TC/IP CABLE. OH AND I NEED SOME HELP.
i want to ftp to my xbox and i have done no modding to the the box at all and i don't want to. i have no router. all i want is to transfer files from da pc to da box if u can help me jus leave a post
|
|
Advertisement
|
|
|
|
Daskins
Senior Member
|
19. February 2004 @ 16:36 |
Link to this message
|
|
THE-DUCK theres nno way of transfering file from your xbox and PC withough modding your xbox in some way. either with chip or using exploits.
Hail To The Redskins!
|
