Just installed and scanned. I'm getting channels with good Quality & Signal readings (85%+) but . . .
a) only 30 channels (& only some of these are displaying names)
b) getting message "no or bad signal" (& occasional broken images)
Normal TV is fine.
Could my N*L still be too weak despite 85%?
Any other possible problems?
thanks
Derry
DVB-XC Box S TDA
S/W 1.0.ST4 Oct 28 2008
H/W Ver 2.0t S
Bootstrap V001
S/W Build KURO
Location: N*L in Dublin
we've been having some bad weather as of late..check outside to see if the cover on the grey/brown box is intact and no water penetration has occurred..also,unscrew connection on inside wall and rescrew back in....the eurovox 1000 has a built in signal booster,so oneof the best boxes for picking up frequencies on the market...if your getting bbc1 etc,then signal problem shouldnt be an issue,especially if your getting 85%!hopeb this helps
Have you tried a deep scan? when you say signal strength is 85%+ what do you mean, is it fluctuating on each channel or is it steady, a signal over 85% can cause problems for the eurovox just the same as too lower signal.
Edit scandalou, Max V/ex1000 sl/ex51000 all have/had signal boosters in the menu, too higher signal causes problems so the signal booster wouldn't come into play here especially at 85%.
