|
what do i need to get key from lite on?
|
|
|
gradeon
Junior Member
|
27. January 2009 @ 22:41 |
Link to this message
|
|
i was told that nothing was needed to get the key from a liteon just to use the probe or solder the drive. i tried using jungle flasher but no com port appears in the program. is there anything wrong?
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
27. January 2009 @ 23:07 |
Link to this message
|
|
good place to start would be with the tutorials on how to flash the drive.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
|
gradeon
Junior Member
|
27. January 2009 @ 23:19 |
Link to this message
|
like i said.... ive been reading and supposedly u dont need an extractor like maximus or ck3. theres other ways of doing it without them.
|
AfterDawn Addict
|
27. January 2009 @ 23:34 |
Link to this message
|
|
well if you would have been reading, you would have saw that you can solder the PCB board to get the key, or make your own spear/probe, and even make your own modding 'board' for it as well. so yes, there are other ways of doing it.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
|
gradeon
Junior Member
|
27. January 2009 @ 23:50 |
Link to this message
|
|
so if i solder the board on the drive, the com port problem will go away?
|
AfterDawn Addict
|
28. January 2009 @ 00:10 |
Link to this message
|
|
probably not, but if you read the guides, on how to properly install the software and the drivers, then i would bet your com problem would go away.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
Member
|
28. January 2009 @ 09:09 |
Link to this message
|
|
I posted the schematics for the homemade tool in the big 29 page iXtreme 1.5 thread (on page 25).
|
|
nuxtux
Suspended due to non-functional email address
|
28. January 2009 @ 11:16 |
Link to this message
|
I worked myself around this liteon problem by buying a older Xbox...
I can't belive some places around here still had old, old xboxs. even ones with 20GB hard drives.
i.e I picked up the limited ed halo 3, not that I like it but it beats plan back and oldie white....
|
|
|CL|
Member
|
28. January 2009 @ 11:38 |
Link to this message
|
I don't care how you go about it, you will still need to extract the key via serial (com port), or usb to com. Whether that be from the ck3, DIY extractor ect..,or a homemade extractor (as i did).
Also, if no com port shows up in JF, just manually type "com1" (or whatever com port you are using) in the com port drop down area.
Good luck!
|
|
Advertisement
|
|
|
|
|CL|
Member
|
28. January 2009 @ 11:45 |
Link to this message
|
Originally posted by nuxtux:
I worked myself around this liteon problem by buying a older Xbox...
I can't belive some places around here still had old, old xboxs. even ones with 20GB hard drives.
i.e I picked up the limited ed halo 3, not that I like it but it beats plan back and oldie white....
The lite-on isn't a problem. The problem is people that don't want to learn to flash them.
If you can solder and have a few parts around it will cost you about $5.00 (if that) to extract the key.
Of course, you will have to have some knowledge of flashing too.
Oh forget it...it is a problem for most people. What a shame. :(
|
