|
|
|
dvd blank/corrupt after burning
|
|
|
vesaire
Newbie
|
4. January 2005 @ 19:33 |
Link to this message
|
|
hi,
I have Toshiba 5205-S703 with DVD Burner (model #SD-R6012). I have been burning dvd's for a long time, with no or minor problems. I had been using dvd-r's (tdk and maxell) Recently I have been receiving a message that the dvd I have just burnt is blank. This occured the first time while i was trying to burn dvd video files (using nero and copytodvd). dvd burning process was normal, after it had been finished, I would try to see if it were succesful but I'd get the message that I'd just inserted blank media!. After wasting several dvd's trying to burn both video or data, I bought a dvd-rw, to see what's going to happen. This time, after burning data, dvd becomes inaccesible. I can still read dvd's, and burn cd's. the dvd's I burnt prior to this problem still work fine too. I'm getting really frustrated. Please help!!!
|
|
Advertisement
|
 |
|
|
|
RussReef
Suspended due to non-functional email address
|
5. January 2005 @ 05:46 |
Link to this message
|
|
I suspect a dirty lense.
|
|
vesaire
Newbie
|
5. January 2005 @ 07:56 |
Link to this message
|
thanks to your response, but it doesn't seem to be the problem. I bought a cleaner cd and cleaned it twice with it already... no change. any other thoughts?
by the way, the dvd-rw I used was memorex and I got an error message saying the dvd could not be burned successfully, this time (3 write errors) and when I try to erase this disc, copytodvd or Nero cannot recognize the media.
|
|
maven1975
Member
|
5. January 2005 @ 08:01 |
Link to this message
|
|
Unfortunately if your laser is particularly dirty then a lens cleaner is not going to do the job.
Best way to clean the lens would be directly but this is not really an option with DVD-Roms units.
I suspect if you have tried different types of media that your burner may be on it way out as a similiar thing started happening to mine.
|
|
vesaire
Newbie
|
5. January 2005 @ 08:36 |
Link to this message
|
|
That's what I'd suspected. But I can still burn CD's. Is this normal??
|
|
maven1975
Member
|
5. January 2005 @ 08:43 |
Link to this message
|
|
Yes the exact same thing happened with my old one, CD's burnt as usual but DVD's where a complete coaster fest.
|
|
vesaire
Newbie
|
5. January 2005 @ 09:12 |
Link to this message
|
|
thanks a lot for your response. buying a new one seems to be the only solution.
|
|
maven1975
Member
|
5. January 2005 @ 13:38 |
Link to this message
|
|
Afraid it seems so :o(
|
|
vesaire
Newbie
|
5. January 2005 @ 15:46 |
Link to this message
|
|
one last question... I've managed to burn a DVD with a 700MB divx file. I was just curious to see if it worked if I didn't use the whole capacity. and it did. any thoughts?
|
|
daemonzx6
Senior Member
|
5. January 2005 @ 16:22 |
Link to this message
|
|
perhaps you are burning the media at a higher speed than it is rated for?
|
|
vesaire
Newbie
|
5. January 2005 @ 16:31 |
Link to this message
|
|
I can only burn @ 1X and I'm pretty sure I've been using that setting all along. But I'll check again.
|
|
vesaire
Newbie
|
7. January 2005 @ 17:17 |
Link to this message
|
|
hi
i have managed to burn another dvd with 2 divx files this time, app. 1.5GB data. after that I tried burning a video dvd and again i got a write error. i'm pasting the error log, in case there's someone out there who can help me find out what the problem is:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 6/25/2002 5:34:54 PM
Nero Version: 5.5.10.7 (Nero Express)
Recorder: <TOSHIBA DVD-ROM SD-R6012>Version: 1331 - HA 0 TA 1 - 5.5.10.7
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-R6012>Version: 1331 - HA 0 TA 1 - 5.5.10.7
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6012 atapi Port 0 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523616kB)
Free physical memory: 209MB (214716kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
6.1.2005
UDF/ISO compilation
10:47:20 PM #1 Phase 112 File dlgbrnst.cpp, Line 1653
DVD-Video files reallocation started
10:47:20 PM #2 Phase 114 File dlgbrnst.cpp, Line 1653
DVD-Video files reallocation completed (no file modified)
10:47:20 PM #3 Text 0 File Isodoc.cpp, Line 7328
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:47:20 PM #4 Phase 111 File dlgbrnst.cpp, Line 1653
DVD-Video files sorted
10:47:20 PM #5 Text 0 File Reader.cpp, Line 115
Reader running
10:47:20 PM #6 Text 0 File Writer.cpp, Line 123
Writer TOSHIBA DVD-ROM SD-R6012 running
10:47:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 4546
First writeable address = 0 (0x00000000)
10:47:21 PM #8 ISO9660GEN -11 File geniso.cpp, Line 4546
First writeable address = 0 (0x00000000)
10:47:21 PM #9 Text 0 File Burncd.cpp, Line 3811
Turn on Disc-At-Once, using DVD media
10:47:21 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2289792 (2289792) = #2289792/508:50.42
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
10:47:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 2298495 (510:48.45)
Last address to be written: 2289791 (508:52.41)
10:47:23 PM #12 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
10:47:23 PM #13 Text 0 File DlgWaitCD.cpp, Line 1452
Recorder: TOSHIBA DVD-ROM SD-R6012;
CDRW code: 00 00 00 00; CD manufacturer unknown
ATIP Data: ?
10:47:23 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 822
Prepare recorder TOSHIBA DVD-ROM SD-R6012 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 394833920
10:47:23 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2289792 (2289792) = #2289792/508:50.42
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289792 blocks [TOSHIBA DVD-ROM SD-R6012]
--------------------------------------------------------------
10:47:23 PM #16 Phase 36 File dlgbrnst.cpp, Line 1653
Burn process started at 1x (1,380 KB/s)
10:47:23 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
10:47:23 PM #18 Text 0 File DVDR.cpp, Line 1235
Recording mode: Sequential Recording Mode
10:47:23 PM #19 Text 0 File Mmc.cpp, Line 17311
Set BUFE: supported -> ON
10:47:23 PM #20 Text 0 File Cdrdrv.cpp, Line 7442
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) exist
10:57:59 PM #21 SCSI -1135 File Cdrdrv.cpp, Line 1402
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03680000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x06 0x69 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
10:57:59 PM #22 DVDR -1135 File Writer.cpp, Line 331
Write error
10:57:59 PM #23 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
10:57:59 PM #24 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
10:57:59 PM #25 Phase 38 File dlgbrnst.cpp, Line 1653
Burn process failed at 1x (1,380 KB/s)
10:57:59 PM #26 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
daemonzx6
Senior Member
|
7. January 2005 @ 18:43 |
Link to this message
|
|
From the looks of it, something is wrong with your installation. You could try reinstalling it. Oh and you should always enable overburn. Also, are you sure your ASPI layer is working right? You can check with Nero InfoTool.
Abit AN8 nForce4 2000MHz FSB
XFX GeForce 6600GT 128MB PCI-E
AMD Athlon64 3700+ 2.42GHz 1MB L2
Plextor PX-712A rev.1.07 RPC1 FW
74GB WD 10,000 RPM 8MB
1024MB SDRAM 400MHz
Windows XP x64 Edition SP1
This message has been edited since posting. Last time this message was edited on 7. January 2005 @ 18:45
|
|
vesaire
Newbie
|
9. January 2005 @ 12:34 |
Link to this message
|
I've uninstalled and reinstalled copytodvd and Nero. I tried burning a dvd with copytodvd. again i ended up with a coaster. i think the problem occurs at finalizing. i get about 4 write errors at the end. the dvd becomes unreadable. could this be a hardware problem? a dirty laser as discussed before?
|
|
daemonzx6
Senior Member
|
9. January 2005 @ 13:37 |
Link to this message
|
|
Hm. Are you burning ISOs or DVD files?
|
|
vesaire
Newbie
|
9. January 2005 @ 17:55 |
Link to this message
|
|
dvd files
both data and video.
|
|
daemonzx6
Senior Member
|
9. January 2005 @ 18:58 |
Link to this message
|
|
Interesting...I would have thought that you might be using ISOs and there was a problem with them, but I just don't know. Are you sure the files don't exceed the disc capacity? Also, by data, do you mean the PC-Friendly stuff, or something else?
|
|
vesaire
Newbie
|
9. January 2005 @ 19:10 |
Link to this message
|
i don't try to burn more than 4.3gb. most of the times i've tried, it was even less. and yes both data and video files are pc-friendly, I guess. since I had no problem before (burning or accessing the burned dvd's) . this problem started very recently and i can burn data up to 2GB with no problem, but no luck with 4GB or a full dvd video file, around 4.1GB. I guess, as mentioned before, my dvd burner is dying slowly. I'll give it another shot with Nero and if it doesn't work I'll stop wasting my blank dvds and get a new burner.
|
|
daemonzx6
Senior Member
|
9. January 2005 @ 19:40 |
Link to this message
|
|
It could be that your laser rails are screwed up after the point where its done writing 2GB. Yes, I believe your burner is in it's deathbed.
|
|
Hallywood
Member
|
9. January 2005 @ 19:59 |
Link to this message
|
|
Hi vesaire,
Have you tried any other backup programs and did you have the same results?
HW.
|
|
vesaire
Newbie
|
11. January 2005 @ 15:41 |
Link to this message
|
|
up to now, i had the same problem with 3 different software. last night, miraculously, nero worked and i managed to burn a video dvd. i'll give it another try, tonight to see what happens. i still don't know what the main issue was. i re-installed software, all 3 of them, blew some canned air into the dvd slot, tried different media, etc. nothing worked. then all of a sudden, it worked... ? anyway, thank you all for your help. I hope the problem doesn't persist. (I read somewhere that cigarette smoke damages the laser, is that true?)
thanks again
This message has been edited since posting. Last time this message was edited on 11. January 2005 @ 15:42
|
|
daemonzx6
Senior Member
|
11. January 2005 @ 16:04 |
Link to this message
|
|
well maybe it had a miraculous recovery. hope it continues working. oh and that cigarrette smoke thing is really true for all electronics.
|
|
vesaire
Newbie
|
12. January 2005 @ 04:26 |
Link to this message
|
|
apparently no recovery. it's back to not working again. anyway, thank you. i'll look into getting a new one.
|
|
daemonzx6
Senior Member
|
12. January 2005 @ 13:41 |
Link to this message
|
|
I had figured as much. I had CD burner that stopped working, then burned one disc, then stopped working again. well maybe you'll get a more reliable one this time
|
|
Advertisement
|
|
|
|
klepec
Newbie
|
13. March 2005 @ 12:34 |
Link to this message
|
is it possible you have toshiba SD-R6012 dvd rom-r-rw and you can not burn dvds at all... are there any specific configurations, because i just can't burn a dvd... impossible... any advise would be welcome...
oh yes... when i try to burn in Nero it wirties... waiting for the driver to become ready..
just don't tell me rw doesn't stand for burning.. hehe..
thanks
|
|
