|
Start up failer
|
|
|
manners
Suspended due to non-functional email address
|
19. January 2005 @ 16:07 |
Link to this message
|
|
Hi guys :)
I have a problem with an old computer I recently inherited *compaq presario* and im not computer savy so im asking for everyones help. I will provide as much information as possible but the only thing it says on the outside of the computer is *pentium processor* and the name of the computer.
I will start off with this, the computer did not come with a harddrive so I purchased one, its a maxtor 80gb 7200rpm and I think its refubished because it came out the box looking very terrible, the grey bag it came in was open and screws were everywhere in the box and the cd it came with was dirty and some what scratched.
I had a friend open the case to the computer and it was very dusty I might add *giggle* and so we installed the harddrive *very easy* but as soon as we turned on the computer the harddrive was beeping several times and I get compaq splash screen and then a error
*Non-system disk or error
replace and strike any key when ready*
this is what it says.
I press control,Alt,Del to restart and the same thing happens all over again, what can I do?
HELP!
My dreams are small but big at heart.
 |
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
19. January 2005 @ 17:37 |
Link to this message
|
|
It means that there is no operating system on the hard drive. You need to format it and put on Windows XP or whatever OS that computer will handle.
I would also check the place where you got the hard drive. If they sold it to you as being a new hard drive, demand your money back, and shop elsewhere.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
This message has been edited since posting. Last time this message was edited on 19. January 2005 @ 17:39
|
|
manners
Suspended due to non-functional email address
|
19. January 2005 @ 18:04 |
Link to this message
|
|
Im sorry if I didn't mention this but I tried to put windows 2000 on it *no luck*
When ever I try to go onto bios it gives me a keyboard error, makes two beeps and then this error,
*Non-system disk or error
replace and strike any key when ready*
Any other suggestions or anything else you should know to help the situation?
regards, Vanessa
My dreams are small but big at heart.
|
|
manners
Suspended due to non-functional email address
|
19. January 2005 @ 19:00 |
Link to this message
|
|
how do you know if your motherboard is not working?
My dreams are small but big at heart.
|
|
ddp
Moderator
|
20. January 2005 @ 06:39 |
Link to this message
|
|
did you get a recovery cd with computer??
|
|
manners
Suspended due to non-functional email address
|
20. January 2005 @ 06:42 |
Link to this message
|
|
Well im at a loss guys :(
my friend put in a harddrive with a xp operating system in it and I still get the same error code. I cant even press a key on the key board because it will give me a keyboard error and right back to this error code.
*Non-system disk or error
replace and strike any key when ready*
what can I do???
My dreams are small but big at heart.
|
|
ddp
Moderator
|
20. January 2005 @ 06:54 |
Link to this message
|
|
do you have keyboard in correct port??
|
|
manners
Suspended due to non-functional email address
|
20. January 2005 @ 08:11 |
Link to this message
|
|
no it did not come with a recovery cd and yes I have the keyboard in the right port.
The harddrive was taken out and the bay for the original hardrive is to big for the new one I bought.And when I got it *the computer* all I got was just the hardware and no installation cds.
My dreams are small but big at heart.
|
|
ddp
Moderator
|
20. January 2005 @ 08:36 |
Link to this message
|
|
on the case front & back, check for model & type? #
|
|
manners
Suspended due to non-functional email address
|
20. January 2005 @ 08:57 |
Link to this message
|
|
This is the model and type *compaq presario* i can get you the model # in a minute, I think it was built in 95'
My dreams are small but big at heart.
|
|
ddp
Moderator
|
20. January 2005 @ 10:33 |
Link to this message
|
|
you might have a problem than as computer is either a 486 or early pentium so won't read hd capacity correctly like maybe 8 gigs out of 80gigs
|
|
manners
Suspended due to non-functional email address
|
20. January 2005 @ 10:38 |
Link to this message
|
|
So am I at a loss?
My dreams are small but big at heart.
|
|
ddp
Moderator
|
20. January 2005 @ 11:26 |
Link to this message
|
|
is computer a desktop or tower. does keyboard have an at or ps2 connector(at the size of your thumb nail & ps2 the size of your baby finger nail). does computer turn off when you press the power button
|
|
manners
Suspended due to non-functional email address
|
20. January 2005 @ 11:48 |
Link to this message
|
|
1.its desktop,monitor,keyboard,tower.
2. keyboard has 3 connections and a built in paper shredder, ps2 is one of them and another that looks like a monitor connection *I have never seen anything that looks like this before. But I connected a regular ps2 keyboard in and they both work the same.
3.The power button is in the back of the computer, nothing in the front except a sleep button and cd type buttons, like play,stop,fastforward etc.
My dreams are small but big at heart.
|
|
ddp
Moderator
|
20. January 2005 @ 12:02 |
Link to this message
|
|
right now unless you can get the model # off the computer it is likely the new hd won't work in computer until you can get into the bios to setup the hd
|
|
Divinus
Suspended due to non-functional email address
|
20. January 2005 @ 12:07 |
Link to this message
|
|
I hope that compaq isn't like the one I threw in the garbage a few days ago. It was around the first class of pentium's also. The strange thing was is I did some investigating after I kept getting HD controller errors and the damn thing doesn't have a normal BIOS like you and I would think of it. It has some pre-made compaq specific software that ran on the original hard drive. There is no way to boot into the BIOS at all. The only thing you can do is let a small auto-detect utility try to determine the drives.
If you hit any key on the keyboard while it's starting up and try to get into the BIOS, it will give you a keyboard error. This was one of the many signs of having that old system that compaq used.
I believe the key to get into the bios on compaq was F11 or F12, something like that. Just go down the row and hit all the damn F-keys until it gets in. It could also be a few other key combinations, but I doubt it.
If you do indeed get a keyboard error whenever you press anything on the keyboard, then you probably have the old system I was refering to earlier. Lets just hope that you don't have it and pressing an F key will get you into the bios successfully.
Athlon 4200+ X2 @ 2.2 GHz | Asus A8N | 1x250GB SATA WD | 7900GTX | 512x2 Corsair PC3200 3-3-3-8 | NEC3500A 2.18 |
|
|
manners
Suspended due to non-functional email address
|
20. January 2005 @ 13:32 |
Link to this message
|
|
model # 6708
I got a windows 98 floppy but nothing installs, it says *device drive not found,abort installation*?? and Iv selected every option.
Regards, Vanessa
My dreams are small but big at heart.
|
|
ddp
Moderator
|
20. January 2005 @ 15:34 |
Link to this message
|
|
|
|
manners
Suspended due to non-functional email address
|
21. January 2005 @ 07:17 |
Link to this message
|
|
Im sorry guys:( to waste time with you.
It was the harddrive and the mother board that is bad, so I took the hardrive back and got my money back and havn't trashed the tower yet but that will be today.
Thanks soooo much ddp for helping me, im glad your here.
I give my Kind regards to ddp,
Vanessa
My dreams are small but big at heart.
|
|
Advertisement
|
|
|
|
ddp
Moderator
|
21. January 2005 @ 09:12 |
Link to this message
|
|
your welcome just too bad not able to get it to work, oh well teach & learn
|
