|
|
|
sudden problem with nero 6
|
|
|
chillout8
Suspended due to non-functional email address
|
27. February 2005 @ 13:30 |
Link to this message
|
|
I've been using nero 6 and anydvd with an iomega x16 external drive succesfully for months, Ive always been able to burn from start to finish in about 15 mins at x4
or 7 mins if I use x8....until a couple of weeks ago - for no apparent reason an average dvd now takes over 40 mins!....have tried defrag and checked for virus etc- i have about 1gb memory with plenty spare
any ideas anyone??? would much appreciate any guidance
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
27. February 2005 @ 17:05 |
Link to this message
|
|
Check and make sure your DVD drive is still in DMA mode and not in PIO mode. Do this to see.
Click start/control panel/System icon/Hardware Tab/Device Manager/IDE ATA/ATAPI Controler
Then right click on each IDE channel and click properties then click the Advanced setting Tab and there you should bebale to change the DMA and PIO Mode settings. Make sure it is in DMA mode.
If it is in PIO mode and wont let you change it to DMA mode then delete your DVD drive and restart and windows should reset it to DMA mode.
This message has been edited since posting. Last time this message was edited on 27. February 2005 @ 17:07
|
|
chillout8
Suspended due to non-functional email address
|
28. February 2005 @ 01:27 |
Link to this message
|
|
thanks for reply - checked and all were set to DMA
Ive noticed the the computer cant do anything else whilst
burning now, whereas before i could...its like i have not enough memory despite having more than half a gig available still....maybe just need a new pc (this ones 2 years old)
|
|
indienemo
Account closed as per user's own request
|
28. February 2005 @ 01:53 |
Link to this message
|
Im having this problem burning mini dvd-r's, it usually gets to about 60-80% then crashes my laptop, its a slim toshiba drive and Nero v. 6608, cheers
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
 |
AfterDawn Addict
|
28. February 2005 @ 07:12 |
Link to this message
|
|
@chillout8
Try uninstalling your DVD/CD drives and have windows reinstall them. Somtimes they show running in DMA mode but really are running in PIO mode. So give that a try and see if it fixes your problem.
|
|
chillout8
Suspended due to non-functional email address
|
28. February 2005 @ 11:45 |
Link to this message
|
|
could be onto something here - after deleting/reinstalling - the secondary IDE channel on device 0 is reading transfer mode "DMA if available" but current transfer mode is saying "PIO mode", unfortunately I cant change it - have tried deleting/reinstalling again but still the same - any ideas?
|
AfterDawn Addict
|
28. February 2005 @ 14:52 |
Link to this message
|
|
did you unisntall the secondary IDE channel Or was it the DVD drive you uninstalled? Try uninstaling the Secondary IDE channel restart and windows should reinstall the IDE channel.
|
|
chillout8
Suspended due to non-functional email address
|
1. March 2005 @ 00:05 |
Link to this message
|
|
did just that and ....works perfectly again!!
thanks larry...ur awesome
|
|
indienemo
Account closed as per user's own request
|
1. March 2005 @ 13:43 |
Link to this message
|
|
(_|_)*kiss* hehe, Larry help me now!
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
This message has been edited since posting. Last time this message was edited on 1. March 2005 @ 13:46
|
AfterDawn Addict
|
2. March 2005 @ 06:34 |
Link to this message
|
@indienemo
helps ya by sticking my foot up your (_|_) hehe J/K
Anyway at the remark saying Quote:
ur awesome
Thanks for the compliment.
But I have to give credit to others for my knowledge of this stuff in this forum.
This is 1 of the best fourms around. I even find myself reading threads that dosent pertain to a problem im having I just read them so i can learn more and know what to do if the problem ever occured. So keep up the good work your all awesome in my book. And hail to the king of the forum Scuba Pete "bows"
|
|
0ptimus
Newbie
|
12. April 2005 @ 07:40 |
Link to this message
|
Ok, maybe someone can help me as well. I'm pretty confused on this one. First what I'm using. Dell 8400 3.0ghz 512mb ram with Dvd reader and seperate DVD burner, running Nero Ultra Edition, using Linkyo 8x DVD+R.
Now to the problem. Basically I can't burn DVD's anymore. When I got the computer about a month ago I could back up DVD's from the reader to the burner using the Nero Recode app using "Burn at Once".
I haven't tried to burn any in awhile and just tried again last night and went through 8 discs without success. Would start burning partially then get a disc burn error (until no I've had no bad discs from this batch of dvd's) I tried some things like using a restore point, deleted some programs (alcohol, liquid) I reinstalled DVD43FREE and AnyDVD and Nero. Tried just using AnyDVD and Just DVD43. Tried different movies (the other night I tried to backup a backup and it failed twice now that I think of it, but I was busy and didn't think anything of it and dropped it) Then got Psycho to burn through, then tried Pete's Dragon again (I know I know, but it's for the younger ones) and got burn error again. It was 2 something in the a.m. so I just quit tryin last night. Any ideas? I did try encoding to the hard disk and that worked fine.
Sorry this is so long for a first post. But your help will be greatly appreciated!
|
Moderator
|
14. April 2005 @ 09:14 |
Link to this message
|
@Optimus - we need a relevant section of your Nero log, minus your serial number which begins with 1A21 or similar. This would show if you had crap media, DMA status, firmware of burner, free memory etc etc
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
LivnDGirl
Member
|
14. April 2005 @ 19:25 |
Link to this message
|
|
Also there is a thread on newbies forum relating to dell 8400's and problems with oem dvd drives.
Might search for it and see if it pertains as well.
****************************************************
I mpeg, therefore I am.
****************************************************
Settle in with the beverage of your choice and ...
Read this first, before you ask for help
http://forums.afterdawn.com/thread_view.cfm/183136
The third tab above "Guides" will answer most of the rest. |
|
0ptimus
Newbie
|
22. April 2005 @ 04:51 |
Link to this message
|
|
Ok, here is my log finally got it. I'm not sure which part is the relevant section so here is the whole thing.
********** Nero Recode 2 **********
Version: 2.0.0.18
1a23-****-****-****-****-****
Project type: Copy entire DVD
Target size: DVD5 (2282925)
Burn settings:
Target: PHILIPS DVD+-RW DVD8631
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\*****\My Documents\Nero Recode (99784642560 bytes free)
Direct burning: true
Target media: DVD
Shutdown when finished: false
Advanced Analysis: false
15:20:34 File burn_dvdfiles.cpp, Line 235
Compile DVD: init
VTS_01 Menus Vobs [122 vobus] 1.95MB -> 1.95MB [R 1.00]
Video: 0.30MB, extra: 1.65MB
Audio: 1 streams
0. Dolby Digital 2-ch Unspecified 1.36MB [enabled]
Subpicture: 1 streams
0. Unspecified 0.05MB [enabled]
VTS_01 Title Vobs [10363 vobus] 3330.87MB -> 3327.60MB [R 1.00]
Video: 3186.52MB, extra: 141.08MB
Audio: 4 streams
0. Dolby Digital 1-ch English 70.09MB [enabled]
1. Dolby Digital 5.1-ch Unspecified 0.00MB [disabled]
2. Dolby Digital 5.1-ch Unspecified 0.00MB [disabled]
3. Dolby Digital 2-ch English 49.01MB [enabled]
Subpicture: 3 streams
0. English 1.74MB [enabled]
1. French 1.53MB [disabled]
2. Spanish 1.74MB [disabled]
15:20:34 File burn_dvdfiles.cpp, Line 1146
Compile DVD: begin copy 1
15:20:35 File NeroRecorderBase.cpp, Line 534
Writing to disc: DVD+R
15:20:35 File NeroRecorderBase.cpp, Line 548
Free capacity on disc: 2283085 sectors (2295104)
15:20:35 File NeroRecorder.cpp, Line 623
Estimated filesystem size: 544
15:20:35 File NeroRecorder.cpp, Line 625
Burn process started
15:20:35 File burn_dvdfiles.cpp, Line 452
Compile DVD: burning 2283022 sectors (1704821 required)
15:20:35 File burn_dvdfiles.cpp, Line 649
Compile DVD: adjust target size to 4459.03MB (3329.73MB obtained)
15:20:35 File burn_dvdfiles.cpp, Line 522
Compiling DVD Volume started
15:21:04 File NeroRecorder.cpp, Line 366
Reserved fragment at 0. Length: 592
15:21:04 File NeroRecorder.cpp, Line 1383
Reserved start fragment at 0
15:21:04 File NeroRecorder.cpp, Line 366
Reserved fragment at 592. Length: 64
15:21:04 File NeroRecorder.cpp, Line 990
Writing VTS_01_0.VOB at sector 656
15:21:04 File vob_record.cpp, Line 648
DirectBurn offset: VTS_01_0.VOB 112
15:21:06 File burn_dvdfiles.cpp, Line 1061
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 1.95MB -> Expected 1.95MB -> Output 1.95MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 122
Slide encoded = 0
StillImage encoded = 0
Output extra size = 1.65MB
Source video size = 0.30MB
Pictures Modified [I 0] [P 0] [B 0]
15:21:07 File NeroRecorder.cpp, Line 1858
Finished writing file VTS_01_0.VOB of size 2048000 bytes (1000 sectors)
15:21:26 File NeroRecorder.cpp, Line 990
Writing VTS_01_1.VOB at sector 1656
15:21:26 File vob_record.cpp, Line 648
DirectBurn offset: VTS_01_1.VOB 1112
3:27:05 PM #1 SCSI -1064 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02105000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x02 0xF4 0x30 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x21 0x02
15:27:05 File NeroRecorder.cpp, Line 1606
Failed to write 144 sectors at 193520
15:27:05 File NeroRecorder.cpp, Line 1757
Failed to write file to disc
15:27:07 File NeroRecorder.cpp, Line 3072
Disc info:
Partitions: 0
TotalCapacity: 2295104, FreeCapacity: 2295104, Next writable address: 193568
Number of fragments: 3
Fragment 1 (reserved, blank), session: 1
start: 0, next writable address: 576
Fragment 2 (reserved, blank), session: 1
start: 592, next writable address: 640
Fragment 3 (), session: 1
start: 656, next writable address: 193568
----- Begin NeroAPI error log -----
1a23****************
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.18
Using interface version: 6.3.0.6
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Recorder: <PHILIPS DVD+-RW DVD8631> Version: CD21 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
=== Scsi-Device-Map ===
DiskPeripheral : ST3160023AS iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522332kB)
Free physical memory: 219MB (224664kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.4.2005
NeroAPI
3:20:35 PM #1 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
3:20:35 PM #2 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO
3:20:35 PM #3 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R
3:20:35 PM #4 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:20:35 PM #5 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x025B6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
3:20:35 PM #6 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03BAF324
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x03 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
3:20:35 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
3:20:35 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
3:20:35 PM #9 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x025B6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
3:20:35 PM #10 Text 0 File DVDPlusRW.cpp, Line 621
Start write address at LBA 0
DVD high compatibility mode: Yes
3:20:35 PM #11 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04773000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
3:20:35 PM #12 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03BAF538
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x03 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 4:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
15:27:19 File NeroRecorder.cpp, Line 1999
Burn process failed
15:27:19 File burn_dvdfiles.cpp, Line 304
Compile DVD: exit
And I did a search for the forum on the 8400 problem couldn't find it, but I'm going to look again now. Thanks everyone!
This message has been edited since posting. Last time this message was edited on 22. April 2005 @ 04:52
|
Moderator
|
22. April 2005 @ 05:50 |
Link to this message
|
have had a couple quick glances thru your log, and have re-read your original post. One suggestion i would make (not too expertly as i've just got back from pub!), would be to have the burner internally and the dvd-rom externally. From what i've read (and i still don't fully know the answer), you can't (or don't need to) set DMA for external USB drives. For my personal experience, whether or not DMA for (external devices) has been a moot point, as i rip from my (external USB2) dvd-rom and get v good results from it, ie nearly all my movies are ripped via this dvd-rom (i rip a lot of movies most days btw) and nearly all my rips are done in 15mins flat. Then my burns are done on my (DMA set quite happily) internal dvd burner at 4x. 15mins always for burning.
I believe your media are of a questionable quality.
can't determine if you were writing to fast (ie can't tell if you're burning at 8x, maybe you could try 4x)
Quote:
Write speed: 0 KB/s
. Don't know why that's the only reference to write speed in your log.
Now you say some of your discs worked fine, i presume this means 'burned' fine, which doesn't guarantee they'll play fine, but then again i bet the kids have watched them ok.
So, i would swap the 2 drives round first of all, remove all the different burning related apps (noting serial numbers of course) and start again from scratch, enabling dma on the (hopefully internal) burner. Plus the media looks questionable, but at least if you burn at 4x or lower we can start to get you burning again..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
22. April 2005 @ 06:02 |
Link to this message
|
I would also go to the Nero homepage and update your program, you are a little behind.
|
|
0ptimus
Newbie
|
4. May 2005 @ 06:20 |
Link to this message
|
Thanks everyone for your help! I must admit though that I'm not quite sure what you mean by the whole Internal/External part. They are both internal drives that came with the computer. Do you mean take one out and put it in a housing? I really don't want to do that. And the media while being cheap (Linkyo 8X DVD+R) it has worked (yes burned correctly is what I mean)97% of the time for me and is still working on my Mad Dog burner connected to my laptop. And prior to this problem occuring had been working (burning) perfectly with no coasters on my 8400 at home. Thats what throws me off, is that it was working fine and then, nothing. I could understand bad media for a few burns but 10 in a row now? And when I take a disc in my other set up (laptop + Mad Dog Burner) it works. Frustrating. That's odd about the 0X write speed, I didn't even notice that. Is there any programs that you know of that I can diagnose my burner with to make sure it's at least functioning? Nero doesn't seem to be to thorough and checks the media only from what I see.
I forgot about the update for the program, I'm going to try that next, only problem is that computer isn't connected to the internet so I'm not quite sure how to do it.
I'm going to try again and see if I can get a new log.
Thanks again everyone for all your help!
|
Moderator
|
4. May 2005 @ 06:30 |
Link to this message
|
|
@Optimus - you could download the Nero update via your internet-able pc, then copy over to burner pc. As for questionable media, it creates a need for forums like this !!. I myself no longer have DVD burning issues now that i use v good media (i came to afterdawn not so many months ago as a dvd noob, experiencing problems that were due to crappy media).
Dunno if updating firmware was mentioned earlier in the post already btw, but a proper Nero log should flush all that out..
You can test burnt discs with freely downloadable progs such as dvdinfopro, which can do crc error tests, speed tests etc. nero comes with a few utils that are quite handy too.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 4. May 2005 @ 06:30
|
|
0ptimus
Newbie
|
6. May 2005 @ 07:27 |
Link to this message
|
Ok, good news and bad news, at least for me. Got my 8400 working again burned 2 correctly back to back. I updated and used TDK media, going to try my linkyo's tonight. But at least I know the drive works.
Onto the bad, I had a problem this morning backing up American Pie on my 5150 laptop with Mad Dog burner which has been perfect the whole time. Here's what I tried: 1st tried TDK 8X media using burn-at-once, partially burned then errored out (I think I saved this log). 2nd, updated Nero (hadn't updated yet on this machine as it was working fine) used new 8x TDK with burn-at-once. Now it errored out but never actually started writing to disc. So... 3rd Used same disc again, started burning got to 99% done and errored. 4th, tried Linkyo disc, burn-at-once, burned all the way till it said 11 seconds remaining and errored out. Here is the error log from that session
----- Begin NeroAPI error log -----
1a23*********************
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.12
Using interface version: 6.6.0.8
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 12c
Recorder: <MAD DOG MD-16XDVD9> Version: 2.F6 - HA 2 TA 0 - 6.6.0.12
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4241N atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST9100823A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4241N D: CDRom0
MAD DOG MD-16XDVD9 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523624kB)
Free physical memory: 260MB (266780kB)
Memory in use : 49
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.5.2005
NeroAPI
11:05:33 AM #1 Phase 175 File APIProgress.cpp, Line 276
Finalizing disc started
11:05:33 AM #2 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
11:05:33 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
11:05:33 AM #4 Text 0 File BurnAtOnceRecorder.cpp, Line 3247
Writing filesystem of size 1146880 at sector 0
11:05:33 AM #5 Text 0 File BurnAtOnceRecorder.cpp, Line 2943
Writing VIDEO_TS.IFO at sector 560
11:05:33 AM #6 Text 0 File BurnAtOnceRecorder.cpp, Line 3171
Writing VIDEO_TS.VOB at sector 576
11:05:35 AM #7 Text 0 File BurnAtOnceRecorder.cpp, Line 2971
Writing VIDEO_TS.BUP at sector 1584
11:05:44 AM #8 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
11:05:44 AM #9 CDR -1176 File SessionUtils.cpp, Line 49
Session fixation error
11:05:44 AM #10 Phase 176 File APIProgress.cpp, Line 276
Finalizing the disc failed
11:05:44 AM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 3629
Disc info:
Partitions: 0
11:05:47 AM #12 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created 1/3/2005 11:33:44 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created 1/3/2005 11:33:24 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1, size=8704 bytes, created 1/3/2005 11:33:46 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
I'm not quite sure what it all means, the only thing I make out is that the finalization failed. I'm also not sure why it's starting the burn process at 2.4X when I start a burn-at-once session it used to say 2 things "compiling DVD volume started...." and "Burn process stared (or something like that). Now since the update it includes the speed of 2.4X although both brands of media I am using ar 8X. Is this just because thats the speed the Burn-at-once feature burns at due to buffering a such? Or is this another problem I have to fix? Thanks again for all your help, I'd be stuck if it wasn't for great help and ideas I'm getting here!
|
|
0ptimus
Newbie
|
6. May 2005 @ 08:09 |
Link to this message
|
|
Ok, now American Pie 2 and The Abyss did the same thing. So I don't think it's some kind of copy protection. This ticks me off, I just get my one at home working and now my main machine goes down. It was working fine yesterday did 7 movies turned off the laptop went home. Turned it on to check if a dvd my dad made of 7 audio files could be seen on my computer (his is Apple) saw that it could and turned it off. Came in to work today, set up the computer and can't even burn 1! I don't get it, I didn't change anything. Please help! Ahh!
I'm trying The Abyss again using Advanced Analysis to see how it does.
Oh and I do have the latest versions of Nero and AnyDVD.
Oh and I forgot to put this in the last message, when I imported the first American Pie, I was looking through the movie in Nero seeing if they put any bad clips in (IE The boy in green shorts from Bourne Supremacy {I think it was that movie}) and in the unrefrenced materials the only thing there was 1 clip, and it was a language selection for Return of the Mummy, portugese and somethin else. Now I did copy that movie yesterday so I don't know. I checked my NeroRecode folder and it was empty. I don't know, computers suck sometimes.
This message has been edited since posting. Last time this message was edited on 6. May 2005 @ 08:13
|
Moderator
|
6. May 2005 @ 08:52 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
7. May 2005 @ 06:23 |
Link to this message
|
your problem COULD also be associated with your linkyo media...you can find many threads in the dvd-media section where i talk in length about the quality of this linkyo stuff~ i have a 25pk of FAKE TYs that i just recently found out were linkyo's dvd-r 8x coded out TYGO2...while you are using the dvd+r media, those are optodisc manufactured coded OPTODISCOR8, not very good in my opinion, just a hair above memorex if that.
while im no expert on Nero, i can safely say i know media fairly well...if your problem is resolved by one of the other members here (they are very good at this stuff) then congrats, but, if all else fails, try using better media ie. genuine Taiyo Yudens or Verbatims, and in your particular case, dvd+r 8x for the Verbs is MCC003 coded, very good stuff.
good luck to you...have a good one.
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
|
0ptimus
Newbie
|
9. May 2005 @ 11:48 |
Link to this message
|
|
Seems it was the ASPI layer. Used a installer and works fine, sort of. I burned about 7-10 DVD's over the weekend and 8 today I get to my ninth today "Laws of Attraction" (for the wife I promise) and I clicked away the do you want to save the log window to quickly not realizing it had failed. Well it had a slight scratch on it and thought it might have been that. So on to my next DVD, Simpsons Season 1 Disc 1. This failed as well. I saved the log but I didn't want to post it up here if I don't need to, I've made this forum about a mile long. I'm trying one more to see if they were flukes or if I have a problem. Thanks so much for the help everyone, that last one (aspi) would have had me down for awhile, I never even heard of that until now!
|
Moderator
|
10. May 2005 @ 00:37 |
Link to this message
|
|
i don't know much about aspi layers myself, and often read differing views as to whether or not they're needed or not. as long as you got it working, thats good enough i guess :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
|
pieman
Senior Member
2 product reviews
|
10. May 2005 @ 00:56 |
Link to this message
|
If you have any probs again...Have you tried Nero cleantools? it checks your registry for corrupt Nero files.Might be worth removing Nero with neros own remove utility and reinstalling.Dont forget to make sure that all the folders you use to rip to/compress to are empty of any previous vobs etc.And dont worry about the length of your post/thread....the guys here are great and only want to sort out your probs.goodluck
pork pie,fish pie,cherry pie,hairy pie.Ill eat em all
|
|
