|
|
|
Wierd problem recently.. dvd's burned - UNRECOVERED READ ERROR (031100)
|
|
|
ngodina
Suspended due to non-functional email address
|
11. April 2005 @ 01:10 |
Link to this message
|
|
Hi All,
Recently, dvd's burnt using liteon 811s, they come up with error message "UNRECOVERED READ ERROR (031100)". Liteon 811s dvd write, windows 2000 sp 4, using nero , dvd santa software to burn.
Burning phase is without errors. But reading same dvd doesn't read either in dvd-rom drive or same dvd writer drive.
I have burnt lots(100's) of dvd's before. Recently this problem started happening. Tried burning at 2x, 2.4x, 4x and 8x, all results in same problem. Sure it is not problem with media because both the media's i am using for a long time and they were working fine until this problem started.
Thanks for your help/advice in advance.
|
|
Advertisement
|
|
|
|
Moderator
|
11. April 2005 @ 04:05 |
Link to this message
|
lol, morning Nat!!.... i'm on the case i'll see if i can find your problem...
Post your relevant section of Nero log (minus serial number!)
edit- all i can find so far is -http://club.cdfreaks.com/showthread.php?threadid=91037
I'm thinking it's media ..
ps i've been copying from some Datawrite Yellow 8x -R discs last night, they are not very good quality, (most took far too long to copy from, one even took 2hours and help from dvd decrypter AND vob blanker). I checked some and they were media code CMC which can only mean baaad things..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 11. April 2005 @ 04:40
|
|
Car.Mike
AfterDawn Addict
|
11. April 2005 @ 06:01 |
Link to this message
|
|
ngodina,
Your disk has a bad spot and that is what the message means. To somewhat verifyy this D/L DVDinfopro(free) and run a CRC test on the disk. I would do as creaky suggests and maybe try a better brand of blank media. The media brand name might be the same but the real manuf. of the disks could be different
|
|
ngodina
Suspended due to non-functional email address
|
11. April 2005 @ 10:21 |
Link to this message
|
Please find the Nero log below:
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 17:51:12
Nero version: 6.6.0.0 (Nero Express)
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS0R - HA 1 TA 0 - 6.6.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <COMPAQ DVD-ROM DRD8120B>Version: 1.10 - HA 1 TA 1 - 6.6.0.0
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340823A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM DRD8120B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-811S E: CDRom0
COMPAQ DVD-ROM DRD8120B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 631MB (646704kB)
Free physical memory: 281MB (288480kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.4.2005
ISO compilation
18:56:42 #1 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
18:56:42 #2 Text 0 File Reader.cpp, Line 127
Reader running
18:56:42 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW LDW-811S running
18:56:43 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
18:56:43 #5 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media
18:56:43 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2201791 (489:17.16, 4300MB)
18:56:43 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
18:56:43 #8 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: LITE-ON DVDRW LDW-811S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
18:56:43 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:56:43 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2201792 (2201792) = #2201792/489:17.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2201792 blocks [LITE-ON DVDRW LDW-811S]
--------------------------------------------------------------
18:56:43 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [LITE-ON DVDRW LDW-811S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509270016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2201792 | lead-out | 1 | 0x00 | 0x41
18:56:43 #12 Phase 24 File dlgbrnst.cpp, Line 1861
Caching of files started
18:56:43 #13 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
18:56:43 #14 Phase 25 File dlgbrnst.cpp, Line 1861
Caching of files completed
18:56:43 #15 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 8x (11,080 KB/s)
18:56:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:56:43 #17 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
18:56:43 #18 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 6:56,113 (416113ms) -> OK
18:56:43 #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
19:05:26 #20 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW LDW-811S > start writing Lead-Out at LBA 2201792 (2198C0h), lenght 0 blocks
19:05:26 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
19:05:54 #22 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
19:05:54 #23 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
19:05:54 #24 Phase 37 File dlgbrnst.cpp, Line 1861
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 30/01/2005 21:00:38
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 30/01/2005 21:00:38
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 03/01/2003 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 13:05:04 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Please let me know, if you need any more information.
Thanks in advance.
|
Moderator
|
11. April 2005 @ 10:33 |
Link to this message
|
i can see you've set the limit to 4300mb, i know when we've spoken you've done the firmware, booktype etc etc. This burn was at 8x though you said you've tried all other speeds. mcc as a media code is top - http://forums.afterdawn.com/thread_view.cfm/164832, but i'm still not convinced these datawrite's are that good.
Is that Nero Express you've used ?. I myself use just Burning Rom
what did dvdinfopro make of one of the burnt discs ?
Here's a recent log of mine (sorry they're all successful too, but it might help highlight something) -
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'D:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Nero version: 6.6.0.0
Recorder: <SONY DVD RW DRU-700A> Version: VY08 - HA 1 TA 0 - 6.6.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-700A >Version: VY08 - HA 1 TA 0 - 6.6.0.0
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD200EB-75CPF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-700A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-700A E: CDRom0
AXV CD/DVD-ROM K: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 168MB (172828kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.4.2005
UDF/ISO compilation
17:56:13 #1 Phase 112 File dlgbrnst.cpp, Line 1861
DVD-Video files reallocation started
17:56:13 #2 Phase 114 File dlgbrnst.cpp, Line 1861
DVD-Video files reallocation completed (no file modified)
17:56:13 #3 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
17:56:13 #4 Phase 111 File dlgbrnst.cpp, Line 1861
DVD-Video files sorted
17:56:13 #5 Text 0 File Reader.cpp, Line 127
Reader running
17:56:13 #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-700A running
17:56:13 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
17:56:13 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
17:56:13 #9 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media
17:56:13 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1858399 (412:58.49, 3629MB)
17:56:13 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
17:56:13 #12 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
17:56:13 #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:56:13 #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1858400 (1858400) = #1858400/412:58.50
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1858400 blocks [SONY DVD RW DRU-700A]
--------------------------------------------------------------
17:56:13 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [SONY DVD RW DRU-700A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3806003200, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1858400 | lead-out | 1 | 0x00 | 0x41
17:56:13 #16 Phase 24 File dlgbrnst.cpp, Line 1861
Caching of files started
17:56:13 #17 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
17:56:13 #18 Phase 25 File dlgbrnst.cpp, Line 1861
Caching of files completed
17:56:13 #19 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 4x (5,540 KB/s)
17:56:13 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:56:13 #21 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 11:35,864 (695864ms) -> OK
17:56:13 #22 Text 0 File DVDR.cpp, Line 1955
Recording mode: Sequential Recording Mode
17:56:13 #23 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Power-Burn -> ON , Generic write control : ON
17:56:13 #24 Text 0 File DVDR.cpp, Line 2096
Start write address at LBA 0
DVD high compatibility mode: Yes
17:56:13 #25 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:56:13 #26 Text 0 File DVDR.cpp, Line 4841
Drive: SONY DVD RW DRU-700A
Book Type request: DVD-ROM
Changing the book type was finished with error code: 0
17:56:27 #27 Text 0 File Cdrdrv.cpp, Line 1281
17:56:27.593 - SONY DVD RW DRU-700A\H1 T0 : Queue again later
18:08:22 #28 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-700A > start writing Lead-Out at LBA 1858400 (1C5B60h), lenght 0 blocks
18:08:22 #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
18:08:22 #30 Text 0 File DVDR.cpp, Line 2338
EndDAO: Last written address was 1858399
18:08:44 #31 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
18:08:44 #32 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
18:08:44 #33 Phase 37 File dlgbrnst.cpp, Line 1861
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 10:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86672 bytes, created 19/06/2003 12:05:04 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 11. April 2005 @ 13:10
|
|
ngodina
Suspended due to non-functional email address
|
11. April 2005 @ 21:25 |
Link to this message
|
|
DVDinfopro of burnt media
--------------------------
Media Information
Disc Regions are 1,2,3,4,5,6,7,8
Media code/Manufacturer ID MCC 003
Media Product Revision Number 00h
Format Capacity 4.20GB(4.51GB)
Book Type DVD+R
Media Type DVD+R
Manufacturer Rated Speed 8.0x 11080KBps
Data area starting sector 30000h
Data area end sector 2198BFh
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1
Complete Media Code
00000000 08 02 00 00 A1 0F 02 00 00 03 00 00 00 24 98 BF .............$..
00000010 00 00 00 00 00 00 03 4D 43 43 00 00 00 00 00 30 .......MCC.....0
00000020 30 33 00 38 23 54 37 12 02 42 6E 02 A8 6B 15 15 03.8#T7..Bn..k..
00000030 0B 0B 08 08 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 ................
Thanks
|
|
ngodina
Suspended due to non-functional email address
|
11. April 2005 @ 21:32 |
Link to this message
|
|
Using DVDinfopro when i do speed test, it displays lot of errors.
Not sure if this helps. Yesterday I burnt 9GB onto two DVD+RW wihtout even single issue.
Please let me know if you find/identify any information.
Also ordered some verbatim MCC dye 8X ones. Let us see how it goes.
Thanks,
|
Moderator
|
12. April 2005 @ 03:02 |
Link to this message
|
Quote:
Using DVDinfopro when i do speed test, it displays lot of errors
- there's your answer.. nice one with the Verbatim's , you won't regret it..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
ngodina
Suspended due to non-functional email address
|
13. April 2005 @ 22:04 |
Link to this message
|
|
Here is the latest update.. annoying experience.
I got verbatim 8x DVD+R and they are also resulting in same problem.
I checked with verbatim website, mcc003 dye disks are compatible with my dvd writer liteon 811s. Liteon compatibility list as well includes mcc003 disks.
Any ideas please...
|
Moderator
|
13. April 2005 @ 23:49 |
Link to this message
|
|
i would use dvdinfopro again and try a CRC check on the failed Verb's. I think you should try a couple of my Verb's and i'll try a couple of yours, and crc check them all, then do the same on each other's drives. To start trying to rule out if this is a drive problem.
edit - i forgot to mention a problem i have last night with my first 2 failed Verbatims (shock horror!) -
I was copying a bootable Solaris DVD for work, last night, so i copied the original as a Nero img file under 4GB or something. This copied to hard disc perfectly. Next i used dvdinfopro (free trial) to run a CRC check on the disc i copied from (Mirror Platinum 4x or smiliar). This CRC check passed with flying colours.
I thought this would be a good excuse to use my Verb's at their rated 8x for the first time. The first burn failed at writing the lead-in stage, well it took 8mins to be still writing the lead-in so i canned it. I used another Verbatim, again at 8x. This one worked 100% in the burn process. Next i used this Verbatim disc to rip another disc image FROM, now Nero complained near the beginning of rip with a couple of read errors. So i CRC checked it and as suspected - CRC errors near start of disc.
Next i used another Verbatim 8x, but this time at my normal habit of 4x. CRC checked the disc - 100% fine. Used this disc to copy another image FROM. 100& successful. Wrote this image to another Verbatim at 4x again. CRC checked 100%.
So even on this v good media on a fast up to date PC, my 8x media was error'ing out unless i used 4x. Now here i must add that i have burnt probably 300 movies on these 8x Verb's, at 4x only without one single burn error or playback error and have CRC checked a fair few 100% also.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 14. April 2005 @ 02:11
|
Moderator
|
14. April 2005 @ 11:32 |
Link to this message
|
|
update - CRC checked my (Verbatim) copy of a movie. Zero errors as expected (plus had watched this disc couple nights ago). Copy/pasted files from this DVD to hard disc. Burnt this at 4x to a Datawrite mcc003 printable disc. Burn 100% successful (Nero). However upon CRC checking the mcc003 disc, at least 7 CRC errors before i stopped the scan. Retried the CRC check of both discs on my dvd-rom drive to rule out my burner being faulty. Stopped scan (on dvd-rom drive) after 6 errors.
Plus looked at the underside of the mcc003 disc, the dye pattern is very uneven. Just an observation.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
|
ngodina
Suspended due to non-functional email address
|
14. April 2005 @ 22:45 |
Link to this message
|
I burnt Datawrite mcc003 at 4X speed. It burnt successfully. Speed test and CRC test does not show any errors. I was bit surprised to see that Nero identified this disk as Verbatim MCC003. May be they were made for Verbatim.
I am going to postpone returning of these Datawrite DVD+R's for some more time and do some more testing this weekend. This week I am also going to test Imation and some Verbatim DVD's as well.
Regards,
|
|
