|
|
|
NEC 1300A Problems
|
|
|
Iamnowan
Newbie
|
13. October 2005 @ 23:27 |
Link to this message
|
|
My NEC 1300a DVDRW Drive has suddenly stopped reading any DVD media.It will only read CDs. Not even commercial DVD's work and burning is not possible. I have uninstalled the drive, updated firmware, changed the read settings to DMA. I have even taken the drive out and set it as Master and still nothing. Is there anything I can do or shall I just get a new drive.
|
|
Advertisement
|
|
|
|
|
Gnomex
Member
|
14. October 2005 @ 07:13 |
Link to this message
|
It sounds like your drive could be on the way out. I had an old plextor that slowly over time refused to read DVD-R/W and then it started to have problems with some DVD-R burns. Well, it ended up in the trash. DVD burners are far less expensive then thay used to be. Now, you have to ask your self one question, how much time do you want to spend on a piece of hardware that is on its way out.
Disclaimer: Any errors in spelling, tact, or fact are transmission errors.
|
|
Iamnowan
Newbie
|
14. October 2005 @ 09:27 |
Link to this message
|
|
Thanks for the advice but my drive is less than a year old and I just started using it to back up DVDs (I've only done it twice in the past few weeks and these were the first times)so I'm hoping I can fix it and not have to shell out any cash to replace something that's practically new.
This message has been edited since posting. Last time this message was edited on 14. October 2005 @ 09:30
|
|
StanH1000
Senior Member
|
18. October 2005 @ 15:24 |
Link to this message
|
|
Try one of those "Cleaning Disks" with the little brush embedded in the disc to clean the laser lens. However, don't get your hopes up too high as I suspect the laser may be out.
|
|
idiotbox
Newbie
|
3. February 2006 @ 21:43 |
Link to this message
|
I am having a serious problem with my 1300a. All of a sudden, it will no longer burn DVDs. It will start the write process and then crap out. Below you will find the log files from a simulated burn and a real burn. The simulated burn went fine but the real burn crapped out. Any insight would be most helpful and thank you in advance.
Test Burn
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 6:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.09 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DTS5 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380012A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom0
_NEC DVD_RW ND-1300A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 282MB (288904kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.2.2006
ISO compilation
8:49:09 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:49:09 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
8:49:09 PM #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
8:49:09 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
8:49:09 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
8:49:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285759 (507:56.59, 4464MB)
8:49:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
8:49:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
8:49:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:49:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2285760 (2285760) = #2285760/507:56.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285760 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
8:49:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681236480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285760 | lead-out | 1 | 0x41 | 0x00
8:49:10 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:49:10 PM #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
8:49:10 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:49:10 PM #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
8:49:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:49:10 PM #17 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
8:49:10 PM #18 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
8:49:10 PM #19 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
8:49:10 PM #20 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 0
Disc Size: 120 mm, Maximum Rate: 2,52 Mbps (0 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: ?
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 0 h (?)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:49:14 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
20:49:14.421 - _NEC DVD_RW ND-1300A\H1 T1 : Queue again later
9:04:23 PM #22 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2285760 (22E0C0h), lenght 0 blocks
9:04:24 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:04:24 PM #24 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 2285759
9:04:43 PM #25 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 6:53:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 4/18/2002 1:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 7:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Real Burn
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 6:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.09 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DTS5 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380012A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom0
_NEC DVD_RW ND-1300A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 136MB (140116kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.2.2006
CD-ROM (ISO)
10:59:56 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:59:56 PM #2 Text 0 File Burncd.cpp, Line 2882
_NEC DVD_RW ND-1300A
Buffer underrun protection activated
10:59:56 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
10:59:56 PM #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
10:59:56 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
10:59:56 PM #6 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using CD-R/RW media
10:59:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 306273 ( 68:05.48)
10:59:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:59:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD_RW ND-1300A;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
10:59:56 PM #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:59:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 306274 (306274) = #306274/68:3.49
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 306274 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
10:59:56 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 627556352, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
306274 | lead-out | 1 | 0x41 | 0x00
10:59:56 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:59:56 PM #14 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
10:59:56 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:59:56 PM #16 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
10:59:56 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:00:16 PM #18 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 306274 (4AC62h), lenght 0 blocks
11:00:17 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:00:17 PM #20 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 229.1x (34,372 KB/s)
11:00:17 PM #21 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (2,400 KB/s)
11:00:17 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:00:17 PM #23 Text 0 File Mmc.cpp, Line 16691
StartDAO : CD-Text - Off
11:00:17 PM #24 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
11:00:17 PM #25 Text 0 File Mmc.cpp, Line 16978
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 44 05 31
11:04:49 PM #26 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 306274 (4AC62h), lenght 0 blocks
11:04:50 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:05:36 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0xFF 0xFF 0xCD 0xDE 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
11:05:36 PM #29 CDR -1135 File ThreadedTransferInterface.cpp, Line 1867
Write error
11:05:36 PM #30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1867
Could not perform end of Disc-at-once
11:05:36 PM #31 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
_NEC DVD_RW ND-1300A\H1 T1
11:05:36 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
11:05:36 PM #33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (2,400 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 6:53:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 4/18/2002 1:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 7:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I am using approved media. Is there something else that could be my problem. I searched both log files and cannot find an answer.
thanks again,
idiot
|
AfterDawn Addict
|
4. February 2006 @ 05:38 |
Link to this message
|
Quote:
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.09
Your firmware is way out of date, no wonder it is not burning. Current at the NEC site is 1.0b which is what I am using for my 1300a
Quote:
Disc Manufacturer: SKC Co - .,Ltd.
It might be advisable to get yourself better media. My Nec likes the recommended media of Verbatim, Sony, Maxell or Fuji.
This message has been edited since posting. Last time this message was edited on 4. February 2006 @ 05:43
|
|
idiotbox
Newbie
|
4. February 2006 @ 05:42 |
Link to this message
|
|
i will check into that. thanks.
also, i just tried to and successfully backed up 2 PS2 games. It seems that the only thing that it won't backup is movies. doesn't make sense.
thanks again,
idiot
|
AfterDawn Addict
|
4. February 2006 @ 05:44 |
Link to this message
|
|
Try the fw update, and get some better media. NEC drives are not too picky but they do like the quality media. I have had my NEC for over two years and it still burns DVD's beautifully.
|
|
StanH1000
Senior Member
|
4. February 2006 @ 06:24 |
Link to this message
|
|
Latest firmware is 1.0c for this NEC 1300 A
|
AfterDawn Addict
|
4. February 2006 @ 06:28 |
Link to this message
|
|
I know firmware page is listing 1.0C but I usually go by the mfr site, until tested. NEC is till listing 1.0B for this drive.
|
|
StanH1000
Senior Member
|
4. February 2006 @ 06:30 |
Link to this message
|
|
Latest firmware is 1.0c for this NEC 1300 A
Sorry for the double post ! ooooppppps!
This message has been edited since posting. Last time this message was edited on 4. February 2006 @ 06:30
|
|
StanH1000
Senior Member
|
4. February 2006 @ 06:32 |
Link to this message
|
|
I gor mine from a NEC website
I don't know why some sites are still showing B
|
AfterDawn Addict
|
4. February 2006 @ 06:34 |
Link to this message
|
|
|
StanH1000
Senior Member
|
4. February 2006 @ 06:45 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 4. February 2006 @ 06:46
|
AfterDawn Addict
|
4. February 2006 @ 06:49 |
Link to this message
|
|
The Liggy and Dees is the modified NEC fw, so unless you know what you are doing I usually will send someone to the mfr site first.
|
|
StanH1000
Senior Member
|
4. February 2006 @ 06:54 |
Link to this message
|
|
They do havew modifed firmware but the link above also contains the ORIGINAL NEC 1.0c firmware for 1300a.
|
|
idiotbox
Newbie
|
4. February 2006 @ 09:35 |
Link to this message
|
|
I tried the new firmware and new media and still nothing. Is there a chance that the burner is shot? It is almost 3 yrs old and has burned around a thousand disks.
|
|
StanH1000
Senior Member
|
4. February 2006 @ 10:04 |
Link to this message
|
|
Yep
Could try the drive in another computer or another drive in your computer, just to confirm that you NEC is gone. Don't sweat too much as drives have really come down in price and you can get an new NEC 3550 from www.newegg.com for around $40. Other brands in same price range as well. Faster with DL capabilities and updated firmware for newer media would be newer features.
|
|
idiotbox
Newbie
|
4. February 2006 @ 18:46 |
Link to this message
|
|
what media do you use suggest for the 3550?
|
|
Advertisement
|
|
|
AfterDawn Addict
|
5. February 2006 @ 03:53 |
Link to this message
|
|
|
