|
I Had posted a thread about the fact that ever since I installed Nero7 I cant burn a good copy. I fixed the aspi problem but the log on nero still shows that it may not be. I decrypt with dvd decrypter commpress with Shrink and burn with DVD decrypter. The movie burns but skips really bad. My drivers are up to date and firmware also.
I burn with a Sony dru-530a or Liteon sohw 1633s at a speed of 4x. Using maxell media.
When nero7 was installed I could not burn at all and now that I have fixed that I can most of the time complete a burn but a bad one. Where the skips were on the dvd I went and checked the vob file there was no problems. That tells me it is the burn. I tried with all my burning software Dvd Decrypter, Nero, Dvd
dfab. And all have the same problem. My last log is before the aspi fix So see if you see anything else wrong.
I have been burning fine for a long time and everything changed when I installed Nero7. I hope I dont have to reformatt. I need an alternative.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 gxc122p Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
Generic DVD-ROM E: CDRom1
LITE-ON DVDRW SOHW-1633S F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 85MB (87780kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.11.2005
Burn DVD Image
11:15:38 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
11:15:38 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
11:15:38 PM #3 Text 0 File Writer.cpp, Line 113
Writer F: LITE-ON DVDRW SOHW-1633S running
11:15:38 PM #4 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
11:15:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2234798 (496:37.23, 4364MB)
11:15:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
11:15:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
11:15:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:15:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2234799 (2234799) = #2234799/496:37.24
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2234799 blocks [F: LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
11:15:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4576868352, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2234799 | lead-out | 1 | 0x41 | 0x00
11:15:38 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:15:38 PM #12 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
11:15:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:15:38 PM #14 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:15:38 PM #15 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
11:29:38 PM #16 Text 0 File WriterStatus.cpp, Line 116
<F: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2234799 (2219AFh), length 0 blocks
11:29:38 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:29:57 PM #18 SPTI -1176 File SCSIPassThrough.cpp, Line 323
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 02
Buffer x03cc0c00: Len x20
11:29:57 PM #19 CDR -1176 File ThreadedTransferInterface.cpp, Line 1937
Session fixation error
F: LITE-ON DVDRW SOHW-1633S
11:29:57 PM #20 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once
11:30:15 PM #21 SPTI -1176 File SCSIPassThrough.cpp, Line 323
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 02
Buffer x03cc0c00: Len x20
11:30:15 PM #22 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders
11:30:15 PM #23 Phase 129 File dlgbrnst.cpp, Line 1725
Generating DVD borders completed successfully
11:30:15 PM #24 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 4, size=29440 bytes, created 10/14/2005 12:01:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 4, size=8704 bytes, created 10/14/2005 12:00:32 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 12:59:41 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Quote:
CdRomPeripheral : Generic DVD-ROM 1.0 gxc122p Port 2 ID 0 DMA: Off
Your DMA is off, here is a fix written by Alkohol:
((To enable DMA back ON by "uninstalling" it's driver ?for Win XP users?))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on + sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of "IDE ATA/ATAPI Controllers"
(B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel")
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps.
Quote:
Physical memory : 511MB (523760kB)
Free physical memory: 85MB (87780kB)
Memory in use : 83 %
Free up some memory by closing all uneeded programs via 'task maneger'
Quote:
11:15:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2234798 (496:37.23, 4364MB)
Your writig too close to the edge, write no further than 4300MB
Quote:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 4, size=29440 bytes, created 10/14/2005 12:01:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 4, size=8704 bytes, created 10/14/2005 12:00:32 PM (InCD4 driver for win NT/2K/XP)
You have Nero's INCD installed, it's this awful packet writing thing that Nero has. Go 'DL' Nero's cleantool to completly uninstall Nero from your system. Then reinstall but this time don't install INCD.
|
