|
[Guide]Puting Saves onto a CD & saving them on a Memory Card
|
|
Senior Member
|
8. December 2005 @ 09:57 |
Link to this message
|
Alot of people don't know this but it is possible to put PS2 saves onto a normal CD and playing it on your ps2 so that it you can save it on your ps2's own Memory Card. I am posting this topic now to tell this guide again. There are a number of ways of booting a CDR on the PS2 and you will need access to a PS2 with backup booting capabilities
Requirements
CDGENPS2 ---> http://www.richpsx.com/playstation2/utilities/cdgenps2v2.zip Blank CD-/+R
PS2MENU--->http://ps2dev.org/kb.x?T=1015 PS2 Save Builder--->http://www.ps2savetools.com/download.php?op=getit&lid=74 PS2 Memory Card (Any Brand)
METHOD
Step 1 - Getting your GameSave
Make sure you download the save you want for the specific game you want to get the game for, also make sure its the same region as the game disc. You can find most game saves at,
http://www.gamefaqs.com
Also If you Want to Update Your Action Replay Max, than you can download that file here.
Europe Code = http://uk.codejunkies.com/support_article_detail.asp?c=GB&cr=GBP&...
USA Codes = http://us.codejunkies.com/support_article_detail.asp?c=US&cr=USD&...
Step 2 - Converting The Save To NPO
Extract all the programs (PS2 Builder,CDGENPS2, etc) by winRAR, into a folder on your harddrive. Than open PS2 Save Builder, than open the save game file you downloaded.
Now click File then Save as and select the save type as NPort(*.npo) and click Save (Choose a place where you remember where you saved it too)
You will have to do this for every game save you want to upload. You can put as many game saves that will fit onto a CDR (700Mb). You can upload as many as you want that will fit into your memory card.
Step 3 - Making Your Image
First you need to create a SYSTEM.CNF;
BOOT2 = cdrom0:\PS2MENU.ELF;1
VER = 1.10
VMODE = NTSC
Copy the above text to notepad and save it as SYSTEM.CNF. Open CDGENPS2 and a window browsing your folder of ps2 saves. Drag the following files from your folder to CDGENPS2 in the following order; SEE PICTURE
To fix the lba right click on a file and click edit. Then check the ?fix lba? box and type the lba. The DUMMY file is there as I am only uploading one npo. This will increase the TOC of my disc and prevent the PS2 from screeching when it boots up. Remember the pic below shows an example. You will need to drag your npo file here instead or as many npos as you like.
To save the image click the IMG button on the left and then choose a name for your BIN/CUE image. (Doesn't matter what name, again save to a folder which you will know)
Step 4 - Burning Your Image
There exists a huge variety of burning software that can be used. If you use NERO, ALCOHOL 120% or Record Now DX, then they would work. In this guide I will use NERO.
Open Nero Burning ROM and click Recorder then Burn Image;
Select your CUE file and then click burn.
Step 5 - Uploading The Files from the CD to the PS2 Memory Card
To upload the game save boot the CD you just created on your PS2. It Will Show a black screen with writing. Let it load until it shows a grey screen as seen in the picture. The following menu will load showing the contents of your MC;
Press R1 and this menu appears;
Move down to cdfs as shown and press x. The contents of the CD will now show. Move to your selected npo save and press Triangle on it. (To know which is which, go back to your computer and find out which it is by using PS2 Save Builder)
The npo will now extract to your Memory Card. The program tells you when it is finished, only takes couple of seconds.
Thank You for Reading this guide. This guide was based on this site on wanado, but i don't actually knew who made it. Credit to that site for the pictures also.
Peace Out,
3dluis
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
|
Advertisement
|
  |
|
|
|
leonbasin
Newbie
|
19. December 2005 @ 11:02 |
Link to this message
|
hi, could you please explain how to make the dummy file cause i am having problems making this thing work and also you know how you make the system.elf file? if i will use a PAL game do i change that line from NTSC to PAL?
|
|
sulaim
Suspended due to non-functional email address
|
19. December 2005 @ 11:24 |
Link to this message
|
|
3dluis, u shud becom a full time guide writer. you are brilliant. one more thing i have 28 posts (including this one) so how come i am still a newbie, ain't i supposed a junior member?
thanx a lot
|
Senior Member
|
19. December 2005 @ 11:28 |
Link to this message
|
Search google "Making a Dummy File" and there should be a program that does it for you.
@suliam -
Quote: 3dluis, u shud becom a full time guide writer. you are brilliant. one more thing i have 28 posts (including this one) so how come i am still a newbie, ain't i supposed a junior member?
thanx a lot
Well i have done alot of other guides lol, if you see my sig ive made other several guides, and the junior thing, is you have to wait because the forum admin has to do a monthly update on the post so you just have to wait till he does that monthly post update tiel
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
|
leonbasin
Newbie
|
19. December 2005 @ 11:46 |
Link to this message
|
|
but do i change the line from ntsc to pal or leave it as it is????
Step 3 - Making Your Image
First you need to create a SYSTEM.CNF;
BOOT2 = cdrom0:\PS2MENU.ELF;1
VER = 1.10
VMODE = "NTSC"????
oh and do you need a harddrive in your ps2 to do this thing
This message has been edited since posting. Last time this message was edited on 19. December 2005 @ 11:47
|
|
leonbasin
Newbie
|
19. December 2005 @ 14:54 |
Link to this message
|
also is there any software available that can convert NTSC saves for ps2 to PAL saves???
|
Senior Member
|
19. December 2005 @ 23:03 |
Link to this message
|
You put this, i know, i have a PAL tv but i left it like this and it still worked
BOOT2 = cdrom0:\PS2MENU.ELF;1
VER = 1.10
VMODE = NTSC
In note pad and you save it as system.cnf
You can get PAL saves and NTSC saves from gamefaq.com
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
|
leonbasin
Newbie
|
19. December 2005 @ 23:13 |
Link to this message
|
|
1. im not talking about having a pal tv im talking about having a pal game
2. can i use ntsc save games with pal versions of the game or does have to be pal saves with the pal version of the game
also
i managed to get this thing working when i changed the ntsc line from that to pal but when i load the game save to my mem card it just gets corrupted data after a while tried again and got the real save game but it didnt let me load it cause when i went into the game it didnt detect any save games on mem card
could this be cause i converted the save file ftom ntsc to pal
do i need a original pal save game
This message has been edited since posting. Last time this message was edited on 19. December 2005 @ 23:16
|
Senior Member
|
19. December 2005 @ 23:32 |
Link to this message
|
Quote: 1. im not talking about having a PAL tv im talking about having a PAL game
2. can i use NTSC save games with PAL versions of the game or does have to be PAL saves with the PAL version of the game
also
i managed to get this thing working when i changed the NTSC line from that to PAL but when i load the game save to my mem card it just gets corrupted data after a while tried again and got the real save game but it didnt let me load it cause when i went into the game it didnt detect any save games on mem card
could this be cause i converted the save file ftom NTSC to PAL
do i need a original PAL save game
Firstly
"1. im not talking about having a PAL tv im talking about having a PAL game"
Pal Games, It doesn t make a difference The Cd is NTSC, when you burn it, The SAVES YOU PUT ON IT is what ever region you downloaded, Example, i have prince of persia Warrior within PAL, i downloaded the PAL save off gamefaqs, and I put them on the guide thing, than when i load the cd, i extract the file from the disc to my memory card.
Note: You will have some currupt data which you delete. But when you transfer it make sure you dont have the same save there. Put it on a different memory card. Or you can delete it and put it there. You cant extract the save if your original save is areaddy on the ps2 memory card
"can i use NTSC save games with PAL versions of the game or does have to be PAL saves with the PAL version of the game "
No, It has to be the same with the same. Check GameFAQs site and look for the game save. That matches your PAL.
"i managed to get this thing working when i changed the NTSC line from that to PAL but when i load the game save to my mem card it just gets corrupted data after a while tried again and got the real save game but it didnt let me load it cause when i went into the game it didnt detect any save games on mem card
could this be cause i converted the save file ftom NTSC to PAL "
You cant convert save files from NTSC to PAL..
Tell me what game are you trying to get the save from so i can help you
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
|
leonbasin
Newbie
|
20. December 2005 @ 01:42 |
Link to this message
|
well i got a program which changes product id of game saves which i thought converted it from NTSC to pal
and i am trying to find some descent PAL save games of resident evil 4 on ps2
thanks!!
|
|
leonbasin
Newbie
|
20. December 2005 @ 01:45 |
Link to this message
|
oh and now after trying a few times with something i probly did wrong i cant delete a resident evil 4 save off my mem card it just wont let me delete it it is the save i transferred off cd to mem card but the save was a NTSC save with a changed product id which i thought changed it to PAL and i was using a save game there so thats probably the problem and also i changed the line to PAL but it worked sort of ill try again without changing to PAL and i need to find some good PAL save games but its like impossible to find any lol
|
Senior Member
|
20. December 2005 @ 01:48 |
Link to this message
|
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
This message has been edited since posting. Last time this message was edited on 20. December 2005 @ 01:50
|
Senior Member
|
20. December 2005 @ 10:22 |
Link to this message
|
|
i did my 1st save like this last nite,
now im tryin to put other saves on the cdr,and it gives me the same # ex
BASLUS-21286SD7.NPO
for each save i wanna do,is this change able?
|
Senior Member
|
20. December 2005 @ 10:25 |
Link to this message
|
|
what i meant is changin the route id?
|
|
leonbasin
Newbie
|
20. December 2005 @ 12:52 |
Link to this message
|
|
1. but see the thing is that the pal game saves on gamefaqs are all crap compared to the ntsc ones is there anywhere else to get em?
2. so is it okay to leave the line ntsc in the system.cnf file even if im gonna be playing pal games with pal saves
thankyou so much for your replies 3dluis you are very helpful and soon ill get there
This message has been edited since posting. Last time this message was edited on 20. December 2005 @ 12:52
|
Senior Member
|
21. December 2005 @ 03:41 |
Link to this message
|
Yes its ok to leavethe line NTSC in the system.
@infam0us - It shouldnt be the same route id, unless its the same save file
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
|
leonbasin
Newbie
|
21. December 2005 @ 12:13 |
Link to this message
|
alright thanks for the help 3dluis now i just gotta find me some descent PAL saves of resident evil 4
|
|
leonbasin
Newbie
|
21. December 2005 @ 12:53 |
Link to this message
|
|
ok i made a cd with saves on it one system save on it and 2 save games the game detects the system data with unlocked stuff but it doesnt let me load the save games cause when i go load game there are no save games there and they are on the mem card
|
|
SS2006
Member
|
26. December 2005 @ 11:19 |
Link to this message
|
|
do we HAVE to put those same LBA number you have in your picture
thanks
|
Senior Member
|
26. December 2005 @ 11:26 |
Link to this message
|
|
[Quote] 21. December 2005 @ 08:41 Report an offensive post
Yes its ok to leavethe line NTSC in the system.
@infam0us - It shouldnt be the same route id, unless its the same save file
[/Quote]
Thats the thing,they are different saves and it gives me the same line,pretty strange
This message has been edited since posting. Last time this message was edited on 26. December 2005 @ 11:26
|
|
SS2006
Member
|
26. December 2005 @ 11:43 |
Link to this message
|
|
my ps2 wontr ead cd's but will dvds
how can im ake a dvd version of this..
|
|
leonbasin
Newbie
|
26. December 2005 @ 13:05 |
Link to this message
|
|
fuck this shit its impossible i did everything on the instructions perfectly about 10 cds ive fucking wasted and the system data works but all the game save are fucking dodgy pieces of shit so ill just start the game again
|
|
SS2006
Member
|
26. December 2005 @ 15:26 |
Link to this message
|
|
hi
i got it to boot perfectly and i saw the main screen and everything
i pressed R1, went down to CDFS pressed X
but i don't see my save!
|
Senior Member
|
26. December 2005 @ 15:28 |
Link to this message
|
|
ur save should show up like this
BASLUS-21286SD7.NPO
and then press triangle,to transfer,did u add a dummy file?
i didnt on mine,maybe u should try that
|
|
Advertisement
|
  |
|
Senior Member
|
26. December 2005 @ 15:29 |
Link to this message
|
|
^plus that save is just an example not the same #s
|