|
|
|
Burning OK - Verify Fails
|
|
|
Malti259
Suspended due to non-functional email address
|
13. December 2005 @ 08:43 |
Link to this message
|
|
Hi everyone,
I have a Samsung TS-H552B DVD Writer running on Windows XP. I have backedup on both +/-R for quite some months now, with no problem whatsoever. All of a sudden the dvd writer stopped burning correctly.
The dvd gets burned but is not playable, neither on the pc nor on a standalone player. I get no errors when burning and I've used both dvddecrypter and nero. If however I turn verify on (on both software), I get a verify error after the dvd has been burned.
I've updated the firmware, dma is turned on, downloaded and installed the latest aspi, tried different media, but to no avail.
Any help please?!
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
13. December 2005 @ 11:32 |
Link to this message
|
|
What kind of media are you using? What is the burn speed? What is the target size of the burn?
Can you post a burn log?
Cheers.
|
|
Malti259
Suspended due to non-functional email address
|
13. December 2005 @ 12:54 |
Link to this message
|
|
I've used Datawrite Titanium +R and ATi +R both 8X. I've burned on HP +R 8X before without any problems. I've set the speed to 8X and 4X but no luck. I've also set dvd shrink for 4300MB, but again, dvd cannot be read after successful burning (verify detected problems again).
Funny thing is that I tried burning on Datawrite Red -R 4X just now and the dvd played well.
here's the nero log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP6003H atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP8004H atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q E: CDRom0
TSSTcorp CD/DVDW TS-H552B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 212MB (217272kB)
Memory in use : 58
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.12.2005
Burn DVD Image
18:59:54 #1 Text 0 File Reader.cpp, Line 127
Reader running
18:59:54 #2 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running
18:59:54 #3 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
18:59:54 #4 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286002 (508:00.02, 4464MB)
18:59:54 #5 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD DVD)
18:59:54 #6 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD+R
Disc Manufacturer ID: INFOME, Media Type ID: R20, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
18:59:54 #7 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:59:54 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286003 (2286003) = #2286003/508:0.3
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286003 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
18:59:54 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681734144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286003 | lead-out | 1 | 0x41 | 0x00
18:59:54 #10 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
18:59:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
19:02:03 #12 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2286003 (22E1B3h), lenght 0 blocks
19:02:03 #13 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:02:03 #14 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 26x (35,994 KB/s)
19:02:03 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
19:02:03 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
19:02:03 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: INFOME..
Media type ID: R20
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 49 4E 46 4F 4D - 45 00 00 52 32 30 00 38 ...INFOME..R20.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
19:02:03 #18 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: INFOME..
Media type ID: R20
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 49 4E 46 4F 4D - 45 00 00 52 32 30 00 38 ...INFOME..R20.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
19:02:03 #19 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: INFOME..
Media type ID: R20
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 49 4E 46 4F 4D - 45 00 00 52 32 30 00 38 ...INFOME..R20.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
19:02:03 #20 Text 0 File DVDR.cpp, Line 6432
Drive: TSSTcorp CD/DVDW TS-H552B
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
19:02:03 #21 CDR -1207 File DVDR.cpp, Line 4786
Book Type automatically set to: DVD-ROM
19:02:03 #22 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
19:09:59 #23 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2286003 (22E1B3h), lenght 0 blocks
19:09:59 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:10:31 #25 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 01:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 13. December 2005 @ 12:57
|
|
Malti259
Suspended due to non-functional email address
|
13. December 2005 @ 21:56 |
Link to this message
|
Anybody got a clue please? Could this be a compatibilty issue with new +R maybe?! As I've said before I burned on +R media in the past using both Nero and DVD Decrypter
|
Moderator
|
14. December 2005 @ 01:39 |
Link to this message
|
Quote:
Nero Version: 6.6.0.13
- not too bad, latest 6.x version is 6.6.0.18 but your issue here isn't Nero itself
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286002 (508:00.02, 4464MB)
- 4464MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD+R
Disc Manufacturer ID: INFOME, Media Type ID: R20, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
- get decent media, i don't believe those are very good quality at all
Quote:
Burn process completed successfully at 8x (11,080 KB/s)
- maybe try 4x
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 14. December 2005 @ 01:41
|
AfterDawn Addict
|
14. December 2005 @ 05:29 |
Link to this message
|
|
I am inclinded to agree with creaky on this. Better media is called for and slow the burn down to 4x and target size of 4300.
|
|
Malti259
Suspended due to non-functional email address
|
14. December 2005 @ 07:37 |
Link to this message
|
I set the size to 4300MB in DVD Shrink, but got the verify error again. Maybe it is a media compatibility issue. What media (brand) do you suggest?
|
Moderator
|
14. December 2005 @ 12:14 |
Link to this message
|
|
see my sig for media recommendations..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
coroner4
Newbie
|
15. December 2005 @ 05:41 |
Link to this message
|
|
This is so strange...
I have the same problem and it started yesterday.
Till yesterday, everything was fine. I burned lots of TDK with no problems. But now, I have errors when verifying.
I tried with different media (Fuji, Maxwell), 4x and 8x, I changed the IDE cable, I change the controller (I put the burner on a PCI raid controller), even I changed the burner (an LG with a BENQ). Alos, I tried with latest Nero 7 and with Ones. Still, the same problem!!! WTF?
My mainboard is evga nforce 4 sli, amd64 3700+ 2gb ocz (driver 6.70).
Why????????
This message has been edited since posting. Last time this message was edited on 15. December 2005 @ 06:29
|
Moderator
|
15. December 2005 @ 09:03 |
Link to this message
|
@coroner4 -
let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.
You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Member
|
15. December 2005 @ 09:26 |
Link to this message
|
|
good media are memorex 16x media, just kidding, buy some verbatim or sony\fuji made in japan on label in store or true taiyo yudens online.
This message has been edited since posting. Last time this message was edited on 15. December 2005 @ 09:41
|
AfterDawn Addict
|
15. December 2005 @ 10:13 |
Link to this message
|
|
@Jondrew
Had me backpeddlin there for second...LOL
|
|
coroner4
Newbie
|
15. December 2005 @ 17:21 |
Link to this message
|
|
I tried again and it's happening again! :(
I'm only one small step away from crying, for God's sake!
The mainboard, cpu, memory are brand new. In the last two weeks, no problem and I burned at least 20 dvds. I'm sure is not the LG birner cause I tried with 2 different ones, and the same problem: burning succesfully (90% of the time) but verification errors.
I will pay the one who will fix this! PM your paypal acount! I'm serious! I really want to get to the bottom of this.
Here is the last log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 9:20:56 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <QK9520H WGR117W >Version: 1.0 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6L300R0 nvatabus Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6L300R0 nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B nvatabus Port 0 ID 3 DMA: Off
CdRomPeripheral : QK9520H WGR117W 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
QK9520H WGR117W G: CDRom1
HL-DT-ST DVDRAM GSA-4163B H: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096624kB)
Free physical memory: 1543MB (1580156kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.12.2005
UDF compilation
9:52:15 PM #1 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Revision : 1.02
UDF Partition Type : physical
9:52:15 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
9:52:15 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
9:52:15 PM #4 Text 0 File Writer.cpp, Line 113
Writer H: HL-DT-ST DVDRAM GSA-4163B running
9:52:16 PM #5 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
9:52:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1991807 (442:37.32, 3890MB)
9:52:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
9:52:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
9:52:16 PM #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:52:16 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1991808 (1991808) = #1991808/442:37.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1991808 blocks [H: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
9:52:16 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4079222784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1991808 | lead-out | 1 | 0x41 | 0x00
9:52:16 PM #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:52:16 PM #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
9:52:16 PM #14 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
9:52:16 PM #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
9:52:16 PM #16 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
9:52:16 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:52:16 PM #18 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
9:52:16 PM #19 Text 0 File DVDR.cpp, Line 5400
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
9:52:16 PM #20 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
9:52:16 PM #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
10:04:55 PM #22 Text 0 File WriterStatus.cpp, Line 116
<H: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1991808 (1E6480h), length 0 blocks
10:04:55 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:05:15 PM #24 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
10:05:15 PM #25 Phase 78 File dlgbrnst.cpp, Line 1725
Data verification started
10:06:18 PM #26 SectorVerify 11 File Cdrdrv.cpp, Line 9531
Sector 25736 on disc has different content to source
10:09:23 PM #27 SectorVerify 11 File Cdrdrv.cpp, Line 9531
Sector 179850 on disc has different content to source
10:10:42 PM #28 SectorVerify 11 File Cdrdrv.cpp, Line 9531
Sector 950410 on disc has different content to source
10:11:59 PM #29 SectorVerify 11 File Cdrdrv.cpp, Line 9531
Sector 1374218 on disc has different content to source
10:12:18 PM #30 SectorVerify 11 File Cdrdrv.cpp, Line 9531
Sector 1836554 on disc has different content to source
10:12:35 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:12:35 PM #32 SectorVerify 11 File Cdrdrv.cpp, Line 9531
Sector 1952138 on disc has different content to source
10:12:35 PM #33 Phase 81 File dlgbrnst.cpp, Line 1725
Data verification failed
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 8:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 12:12:26 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 12:59:41 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 16. December 2005 @ 01:56
|
Moderator
|
16. December 2005 @ 01:55 |
Link to this message
|
(slightly colourul language edited out) :). but i can see why you're frustrated. see here for getting DMA back ON for the drives, you have those frustrating 'nvatabus' drivers, this link will help more - http://forums.afterdawn.com/thread_view.cfm/268664
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
coroner4
Newbie
|
16. December 2005 @ 04:30 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 16. December 2005 @ 08:40
|
|
Galbin
Suspended due to non-functional email address
|
16. December 2005 @ 05:50 |
Link to this message
|
I have a similar problem with Nero and a Lite-on burner. The burner is very erratic with Nero, but works perfectly with DVD Decrypter. On another computer I have Nero and a Sony writer, and I have never had a problem.
To verify that your burner and disks are OK, you might want to use DVD Decrypter to read and write a file in ISO mode. If this works, then the next step would be to reinitialize your Nero setup
|
|
coroner4
Newbie
|
16. December 2005 @ 08:47 |
Link to this message
|
I dont think it's the DMA off from Nero log (cause the DMA is ON 100%, Nero got it wrong).
I checked nerohistory. I had always DMA Off in the log, but tens of succesfully burning and verifications. Only the last several burning attemps have verification errors, everything else is identical.
I dont want to change the media, etc.
My mind is very simple. If something was working just fine, I want to know exactly WHY it's not working now. Even if lets say it will work with a different media and a different software, still I'm not happy because the problem it's not fixed, just ignored.
Thanks for all your help so far!
|
Moderator
|
16. December 2005 @ 10:26 |
Link to this message
|
@coroner4 - will see if i can find a better thread for info on the 'nvatabus' drivers.
edit- see this link here - http://forums.afterdawn.com/thread_view.cfm/3/231433#1304083
kurtp21 found the fix; i think this was for 'nvidesm' drivers but as far as i remember it's the same difference, ie get rid of the nvidia IDE controllers and install standard microsoft drivers
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 16. December 2005 @ 10:29
|
AfterDawn Addict
|
16. December 2005 @ 10:34 |
Link to this message
|
@coroner4
Quote:
<HL-DT-ST DVDRAM GSA-4163B>Version: A103
Your firmware version is 2 behind. Current is A105 you can get it here: http://forum.rpc1.org/dl_result.php?kaj=1&isces
I noticed cause I have the same drive.
I'm sure this will help.
Quote:
Disc Manufacturer ID: CMC.MAG.
I'm also sure that this will not help. CMC MAG is crap media and costs just as much as good media. Get some Taiyo Yuden, Verbatim, Maxell.
Cheers
This message has been edited since posting. Last time this message was edited on 16. December 2005 @ 10:37
|
Moderator
|
16. December 2005 @ 10:38 |
Link to this message
|
|
@9mmruger1 - nice one, sorry, was just packing laptop up to get back on the motorway when i replied to coroner's logfile, and when i saw your reply i realised i hadn't 'healed' the logfile :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
16. December 2005 @ 10:52 |
Link to this message
|
|
You know, I learned from you! I read all your log reports that I can.
heheheheheh
|
Moderator
|
16. December 2005 @ 10:54 |
Link to this message
|
lol. i'm still trying to keep on top of those logs, even with the half dozen or so of us Nero log regulars, the logs keep a'coming :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
16. December 2005 @ 11:09 |
Link to this message
|
I'm hoping to have Nero very shortly, coming with my DQ60. This will be good for study as well.
|
|
coroner4
Newbie
|
16. December 2005 @ 14:20 |
Link to this message
|
|
Guys, great replies so far! I heard "rumours" about this forum, like great mods and users. Now, the rumour is solid fact for me.
I will update my firmware, also I will put microsoft ide drivers and I will let you know how it worked.
Now I know the media isnt great (on the box is TDK - from Costco), but I'm puzzled because so far I didn't have any problems with it.
Where do I find Taiyo Yuden in Toronto?
Thanks again guys! I will let you know how it works...
This message has been edited since posting. Last time this message was edited on 16. December 2005 @ 14:21
|
|
Advertisement
|
|
|
|
coroner4
Newbie
|
16. December 2005 @ 17:14 |
Link to this message
|
|
Ok, did those.
From the log:
[...]
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 1 TA 0 - 7.0.1.4
[...]
DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On
[...]
I tried first 4x with my TDK media:
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
It didnt work :(
Almost at the end of the disc (the total amount to burn was ~3.5GB), I had a verification error :
9:26:50 PM #27 SectorVerify 11 File Cdrdrv.cpp, Line 9531
Sector 353496 on disc has different content to source
9:26:50 PM #28 Phase 81 File dlgbrnst.cpp, Line 1725
Data verification failed
It was a major disapointment, let me tell you! I was sure that updating my firmware and using the Microsoft IDE drivers will help me get rid of this problem. It didnt.
Then I tried again with a different media (FUJIFILM, at least this is what is written on the disc):
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Burned at 8x.
It worked!!! No errors. But I know that it's an isolated case. After burning ten more dvds without errors I can say that my problem is gone.
Still I don't believe the media is the issue. As I told you, burned tons of TDK without any problem...
9:59:56 PM #27 Phase 80 File dlgbrnst.cpp, Line 1725
Data verification completed successfully
After I will burn some more, I will let you know...
Thanks again!!!
This message has been edited since posting. Last time this message was edited on 16. December 2005 @ 17:16
|
|
