Problem when installing Windows XP Professional (and Home) Edition
|
|
hang0000
Member
|
22. December 2005 @ 18:47 |
Link to this message
|
I have a PC with Pentium 3 533Mhz Processor. I dunno why, my motherboard (or BIOS I think says it's a 366Mhz Pentium PRO). My Motherboard Model is KL97-XV.
Now, the problem is when I inatall WinXP (any version, PRO or HOME) by booting it from a CD. It loads fine. But it hangs when it writes "Setup is starting Windows", just before the license agreement page. I've tried for more than 10 times, the results are the same.
It's quite weired. It doesn't hang when I install Win98SE.
* I've tried to remove the Pentium III Processor and insert a Pentium 2 Processor (266Mhz), it didn't hang when installing WinXP, but it takes a long time!
This message has been edited since posting. Last time this message was edited on 22. December 2005 @ 18:49
|
Advertisement
|
  |
|
ku4hx
Suspended permanently
|
24. December 2005 @ 03:21 |
Link to this message
|
Sounds to me like you have hardware/driver compatibility problems with XP. If 98SE runs OK and XP wont, that's what I'd assume first. You might want to check the Microsoft site, they have an XP compatibility list, and Asus may can supply you with updated drivers at their site.
I've got XP Pro running on an old Intel machine with a 667MHz processor. It's sloooooooooooooooooooooow.
On the processors you're using, performance is going to be dismal no matter what MS says about XP requirements. Their concern there is just stable running, not performance.
|
hang0000
Member
|
24. December 2005 @ 04:44 |
Link to this message
|
If I get a support driver (for my damn damn old Motherboard), how can I install it before installing WinXP?
|
ddp
Moderator
|
24. December 2005 @ 06:50 |
Link to this message
|
are you certain that is a p3 533 & not 366 as bios states? check in bios to see if can change cpu settings or on the motherboard for dipswitches or jumpers. read motherbook manual for that info.
|
hang0000
Member
|
24. December 2005 @ 07:08 |
Link to this message
|
I've tried to change buss speed to 83Mhz, max clock for my motherboard (default- 66Mhz) and my PC "screams" madly. I've tried other clock speed but all didn't work.
And I get that information from its sticker(on that processor)... And my cousin have used it on another motherboard, it's 533Mhz,can be over-clocked to 800Mhz.
This message has been edited since posting. Last time this message was edited on 24. December 2005 @ 07:10
|
ddp
Moderator
|
24. December 2005 @ 07:19 |
Link to this message
|
is the cpu a slot or a socket. what is printed on the cpu such as 533 133 512k. 553 is cpu speed, 133 is the bus speed & 512k is the ram cache on the cpu. is possible that cpu won't work properly unless there is a bios update for motherboard to see true cpu speed or get a board that sees that cpu.
|
hang0000
Member
|
24. December 2005 @ 07:25 |
Link to this message
|
The problem is I cannot find any update for my Motherboard.... I try one(other model) and it says "Your system doesn't support flash."
|
ddp
Moderator
|
24. December 2005 @ 07:39 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 24. December 2005 @ 07:40
|
hang0000
Member
|
24. December 2005 @ 07:45 |
Link to this message
|
Just curious, then wat is the 88 Mhz option for?
|
hang0000
Member
|
24. December 2005 @ 07:45 |
Link to this message
|
Just curious, then wat is the 83 Mhz option for?
|
ddp
Moderator
|
24. December 2005 @ 07:48 |
Link to this message
|
for a cpu that can use 83mhz bus speed.
|
hang0000
Member
|
24. December 2005 @ 07:53 |
Link to this message
|
Hey then that Pentium 3's bus speed can reach up to 100Mhz!
|
ddp
Moderator
|
24. December 2005 @ 08:07 |
Link to this message
|
according to hp link, can only go upto 83mhz not 100mhz which even than is below the 133mhz needed to run your 533mhz cpu properly.
|
hang0000
Member
|
24. December 2005 @ 08:11 |
Link to this message
|
Help me! And my pc cannot even boot when I modify its jumper to 83 Mhz! It can only run at highest bus rate of 66Mhz. Why it's like this? Why???
|
ddp
Moderator
|
24. December 2005 @ 12:34 |
Link to this message
|
the motherboard cannot support that cpu as that cpu probably needs 133mhz bus speed but motherboard only goes to 83mhz. get a newer board & cpu to fit in your system & parts as can't make a 533mhz cpu to work on a motherboard designed for 333mhz.
|
hang0000
Member
|
24. December 2005 @ 22:15 |
Link to this message
|
One more question, I've spotted there's a group of jumpers labeled "clock Frequency" with options 3.0, 3.5, 4.0, 4.5.
Can they be modified? ... to increase CPU speed?
|
Advertisement
|
  |
|
ddp
Moderator
|
25. December 2005 @ 07:53 |
Link to this message
|
those are your ratios such as 3x, 3.5x & so on but you need 5x133 for that cpu & can only get 5x66.
|