|
|
|
Infamous Illegal disc error in Nero
|
|
|
Jsb9595
Newbie
|
27. January 2006 @ 14:24 |
Link to this message
|
|
hello all, im ne3w to this forum but have been reading up alot on it lately cause I too have had the illegal disc error message right after caching. I have burned lots of dvd's before using the recode and what not but, im trying to make a data disc and it wont let me. I have read the updating the firmware and making sure i have a newer version of nero stuff which i have done but its still not working! here is my log file i hope you guys can help!
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4019GAX atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2500JS-00MHB0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD1200JD-00FYB0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : Memorex 52MAXX 3252AJ atapi Port 3 ID 1 DMA: On
DiskPeripheral : fasttx2k Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
Memorex DVD+/-DLRWL1 F16 E: CDRom0
Memorex 52MAXX 3252AJ F: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 270MB (276620kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.1.2006
UDF compilation
5:54:33 PM #1 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Revision : 1.02
UDF Partition Type : physical
5:54:34 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
5:54:34 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
5:54:34 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: Memorex DVD+/-DLRWL1 F16 running
5:54:34 PM #5 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
5:54:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2105551 (467:54.01, 4112MB)
5:54:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
5:54:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: MXL RG - 04
Disc Application Code: 64, Disc Physical Code: 193
5:54:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
5:54:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2105552 (2105552) = #2105552/467:54.2
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2105552 blocks [E: Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
5:54:57 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4312170496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2105552 | lead-out | 1 | 0x41 | 0x00
5:54:57 PM #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:54:57 PM #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
5:54:57 PM #14 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
5:54:57 PM #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
5:54:57 PM #16 Phase 28 File dlgbrnst.cpp, Line 1725
Speed measurement started
5:54:57 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:56:44 PM #18 Text 0 File WriterStatus.cpp, Line 116
<E: Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 2105552 (2020D0h), length 0 blocks
5:56:44 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:56:44 PM #20 Phase 29 File dlgbrnst.cpp, Line 1674
Speed measurement completed: 29.8x (41,170 KB/s)
5:56:44 PM #21 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 4x (5,540 KB/s)
5:56:44 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:56:44 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
5:56:44 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
5:56:44 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
5:56:44 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:56:52 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x04c90000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5:56:52 PM #28 CDR -1046 File Writer.cpp, Line 302
Illegal disc
E: Memorex DVD+/-DLRWL1 F16
5:56:52 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:56:53 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:56:53 PM #31 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1
5:56:53 PM #32 Phase 34 File dlgbrnst.cpp, Line 1725
Simulation failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 12:33:44 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 4, size=29440 bytes, created 10/14/2005 12:01:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 4, size=8704 bytes, created 10/14/2005 12:00:32 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thanks guys!
|
|
Advertisement
|
|
|
|
Moderator
1 product review
|
30. January 2006 @ 17:34 |
Link to this message
|
Quote:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 4, size=29440 bytes, created 10/14/2005 12:01:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 4, size=8704 bytes, created 10/14/2005 12:00:32 PM (InCD4 driver for win NT/2K/XP)
InCD is known to cause conflicts when burning to DVD's, if you don't need it I would look into removing it.
|
|
b18bek9
Member
1 product review
|
30. January 2006 @ 17:55 |
Link to this message
|
|
let me guess your using memorex disc's?...because i got a similarm essage when i tried to use memorex's new 16x dvd's i dont know whats wrong with yours but well just a guess
bean0
|
Moderator
1 product review
|
31. January 2006 @ 02:30 |
Link to this message
|
Quote:
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: MXL RG - 04
Using Maxells discs.
|
|
Jsb9595
Newbie
|
31. January 2006 @ 06:44 |
Link to this message
|
Hello an update.... after all was said and done and trying all the tricks i read in this forum about fixing the problem, liek updating firmware, updating Nero, heck i even read somewhere installing Musicmatch before Nero could mess up Nero and cause the error, BUT i finally got it to work just by changing my media. I went and purchased some TDK DVD's they were only 8x DVD's as compared to the Maxell's 16x ones i purchased (maybe that was the culprit right there the burner doesn't know how to recognize a 16x disc....????) But yes i put the TDK disc in and walla worked great the first time. Its just all kinda confusing since the DVD rating sites say Maxell is a very good brand to buy and even the guys i bought it from were puzzled cause they said it was good. Sooo.... for now the problem is fixed. thanks for helping!
|
Moderator
1 product review
|
31. January 2006 @ 07:17 |
Link to this message
|
|
It is always a good idea to start with the cheapest and easiest solutions first, such as changing media and updating programs...firmware updates are usually reserved for a last fix because a bad flash can ruin a drive. However, I like to lay it all out there for the poster(you) to decide what you do and don't want to try.
Anywhoo...I'm glad the problem is resolved for now.
Happy burning.
Edit: Maxell is all I use, and IMHO they are some of the best available, so it is a suprise to me as well...notice I didn't suggest a media change.
This message has been edited since posting. Last time this message was edited on 31. January 2006 @ 07:18
|
|
b18bek9
Member
1 product review
|
2. February 2006 @ 09:37 |
Link to this message
|
|
jsb i stick to sony 16x never havea problem bad thing is i hate sony for the other things they do but hey give me a descent product and i'ma stick with it
bean0
|
Moderator
1 product review
|
2. February 2006 @ 14:22 |
Link to this message
|
|
The best advice it to do/use what works best for you, every systems tolerances are different.
I would agree with you on the Sony slant, I own several Sony products but don't always agree with their business practices.
|
|
jayjay23
Newbie
|
12. February 2006 @ 10:13 |
Link to this message
|
im new to this and i can burn tkd +'s just fine but i cant burn tdk -'s any suggestions will help heres my error log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 7:06:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <HP DVD Writer 635d> Version: JPS3 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HP DVD Writer 635d >Version: JPS3 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400EB-11CPF0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 635d atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 635d D: CDRom0
HL-DT-ST CD-RW GCE-8483B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 1
BUFE : 0
Physical memory : 509MB (522224kB)
Free physical memory: 112MB (114720kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.2.2006
UDF/ISO compilation
2:52:55 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
2:52:55 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
2:52:55 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:52:55 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
2:52:55 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
2:52:55 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
2:52:55 PM #7 Text 0 File Writer.cpp, Line 113
Writer D: HP DVD Writer 635d running
2:52:55 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:52:55 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:52:55 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
2:52:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 457311 (101:37.36, 893MB)
2:52:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
2:52:56 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HP DVD Writer 635d, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
2:52:56 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:52:56 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 457312 (457312) = #457312/101:37.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 457312 blocks [D: HP DVD Writer 635d]
--------------------------------------------------------------
2:52:56 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HP DVD Writer 635d] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 936574976, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
457312 | lead-out | 1 | 0x41 | 0x00
2:52:56 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:52:56 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
2:52:56 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
2:52:56 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
2:52:56 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8,310 KB/s)
2:52:56 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:52:56 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
2:52:56 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
2:52:56 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
2:52:56 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:53:40 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
14:53:40.687 - D: HP DVD Writer 635d : Queue again later
2:56:28 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 0E 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x07010000: Len x10000
0x00 00 01 BA 44 03 34 62 84 AB 01 89 C3 F8 00 00
0x01 E0 07 EC 81 C0 0A 31 00 CD EA A3 11 00 CD A4
0x41 00 00 01 B3 16 00 F0 C4 02 CE E0 A5 10 11 11
2:56:28 PM #29 CDR -1046 File Writer.cpp, Line 302
Illegal disc
D: HP DVD Writer 635d
2:56:28 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:56:28 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:56:28 PM #32 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 3583
2:56:28 PM #33 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 7:06:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/20/2005 9:25:14 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
1 product review
|
12. February 2006 @ 14:57 |
Link to this message
|
Quote:
Physical memory : 509MB (522224kB)
Free physical memory: 112MB (114720kB)
Memory in use : 78 %
You don't have alot of resources, try to free some up...no multitasking.
Other than the memory and the TDK blanks, I don't see a whole lot wrong with the log. If the +'s are working stick with them or try a whole new brand all together, like verbatim...taiyo yuden or sony, fuji, maxell(made in Japan).
|
|
jayjay23
Newbie
|
12. February 2006 @ 15:32 |
Link to this message
|
|
thanks yea the plus's were skipping on my dvd player and it was an apex so i just brought a new dvd player and my tdk pluses work fine and i guess i'll have to stick with plus or try a new brand for minuses thanks for the input
|
Moderator
1 product review
|
12. February 2006 @ 15:43 |
Link to this message
|
|
Personally I would stick with the +R flavored discs and booktype 'em.
And you are welcome.
|
|
jayjay23
Newbie
|
12. February 2006 @ 15:58 |
Link to this message
|
|
yea i thinks thats a good idea now im stuck with a 50 pack of tdk -'s and nothing to do with them
|
Moderator
1 product review
|
12. February 2006 @ 16:14 |
Link to this message
|
|
You give those and the CMC Mags to friends...LOL
|
|
jayjay23
Newbie
|
12. February 2006 @ 16:21 |
Link to this message
|
|
lol what brand is cmc-mag anyway?
|
Moderator
1 product review
|
13. February 2006 @ 12:40 |
Link to this message
|
|
Memorex, Imation, and the list goes on and on...terrible stuff really, stick with the brands that I posted earlier and you shouldn't have any problems.
|
|
jmox
Newbie
|
21. March 2006 @ 18:43 |
Link to this message
|
Can someone take a look at my log, and illegal disc problem?
I just switched to 16X discs, and haven't been able to make any backups.
Thanks.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 4 ID 0 DMA: On
DiskPeripheral : ST3160021A atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 82MB (84308kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.3.2006
NeroAPI
9:23:45 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
9:23:46 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
9:23:46 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
9:23:47 PM #4 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x0AF35000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
9:23:48 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
9:23:48 PM #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running
9:23:48 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:23:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:23:49 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:23:49 PM #10 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media
9:23:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2220783 (493:30.33, 4337MB)
9:23:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO
9:23:49 PM #13 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
9:23:49 PM #14 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:23:49 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2220784 (2220784) = #2220784/493:30.34
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2220784 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
9:23:49 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4548165632, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2220784 | lead-out | 1 | 0x00 | 0x41
9:23:53 PM #17 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
9:23:53 PM #18 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
9:23:53 PM #19 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
9:23:53 PM #20 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)
9:23:53 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:23:53 PM #22 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode for Multisession
9:23:53 PM #23 Text 0 File Mmc.cpp, Line 20394
Set BUFE: supported -> ON , SMART-BURN : ON
9:23:53 PM #24 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: No
9:23:53 PM #25 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:23:53 PM #26 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x10C24000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
9:24:09 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x00CB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
9:24:09 PM #28 CDR -1046 File Writer.cpp, Line 304
Illegal disc
9:24:09 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:24:09 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
9:24:09 PM #31 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was -1
9:24:09 PM #32 Phase 133 File APIProgress.cpp, Line 273
Writing short lead-out
9:24:14 PM #33 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 4, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
9:24:18 PM #34 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x10C24000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
9:24:18 PM #35 CDR -1066 File WriterStatus.cpp, Line 164
Invalid field in command
9:24:18 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
9:24:18 PM #37 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)
9:24:18 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
9:24:18 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
9:24:21 PM #40 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x10C24000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 10:07:32 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
JDCIS
Newbie
|
18. June 2006 @ 18:35 |
Link to this message
|
I ran into this using a Memorex DVD+/-DLRWL1 F16 and got the illegal Media error when I went to 16X disks from the 8X I was using before. Since 16X is all you find nowdays in printables, I figure I need to get this corrected or get another drive.
This is not caused by BAD MEDIA as has been stated so often in these forums. I don't know for sure why a 16X disk won't work properly in a 16X Dual Layer Dual Format disk, unless it is only suppoed to be 16X for CD's and not DVD's, which may be the case. I do know that the media burns fine with Nero on my laptop which is newer, so it's not the media, the Nero software, or the files being burned. It is the drive or the firmware (I have the most current flashed already).
Anyway, that much I know about the situation - if there are any gurus out there that know the answer I'd like to hear it. Thanks!
|
AfterDawn Addict
|
18. June 2006 @ 22:04 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 18. June 2006 @ 22:05
|
AfterDawn Addict
|
19. June 2006 @ 03:11 |
Link to this message
|
|
I most certainly and whole heartedly agree with Gwendolin. Media does matter and certain media is not good for ALL drives. Just because you have the latest firmware doesn't mean that you can play/record all media! It's what the manufacture put in the firmware the will recognize the disk..... and certain disks will play/record better for certain players/burners. If you have a 16x Dual Layer writer it SHOULD play/record all the up to date 16x media.... but for some reason can't. The reason is media .... there are so many out there and then so many manufacturers that make the media ...... you would think that the player/recorder manufacturer do a better job with firmware than they do...... that's why it's important to have the latest firmware update! My drive, Philips 8631, was a bad drive when it first came out and many people who bought DELLs that had this drive before 4/2005 made DELL replace the drive with an NEC drive! I was fortunate enough to be the lucky one that had this drive that works! and been burning ever since!
|
|
JDCIS
Newbie
|
12. July 2006 @ 04:56 |
Link to this message
|
|
RE:Illegal disc error message
Seems like Gwendolyn and others took my comments wrong about burning problems not being caused by bad media. I am not endorsing low quality media. Media matters, of course. Use Cheapo Depot discs and you will find out. BUT, the problem with some Panasonic 16X burners that were under discussion is not a media problem, as I pointed out by noting that the media was working fine on another computer with a different 16X burner.
I was simply trying to be logical. If you buy new media and NONE of your new media works in your burner but your older media worked fine, I would first look at the difference between old and new media. Did you go form 8X to 16X or something like that? It would also be practical to try it in another burner before blaming the media. If possible, use the same burning software and version. Once you eliminate potential sources of the problem, you eventually wind up with what's actually wrong.
In my case I had several hundred dollars worth of Verbatum media, which I consider to be as good as any, and I couldn't use any of it.
The simple solution, after reading much about the problem and spending a couple of hours figuring out what was actuall happening, was to go spend $70 and get a newer burner, which works perfectly, even at 16X. My older Penasonic 16X burner still works perfectly on 8X media, but it is retired now, and the problem no longer exists and I have had zero media failures thus far.
Sorry if I offended anyone by saying it's not always the media, but I was just trying to share my observations, and if some media and burner hardware isn't actually compatable, as seems to be the case as the world moves past 8X media, all of the software and firmware upgrades in the world may not restore compatability. And it truly is not always the media, but that should in no way be taken as a recommendation to use anything less than premium quality media.
Best regards,
J
|
AfterDawn Addict
|
12. July 2006 @ 10:00 |
Link to this message
|
|
why did it take almost a month to reply??
|
|
rrrrob
Newbie
|
12. July 2006 @ 12:10 |
Link to this message
|
most of the time when i get a message about a disk error, it is because I have DVD Decrypt, or some other DVD program open, at the time I am trying to work with Nero. Or it could just be that Nero sucks (quite possible!).
|
|
crs278
Suspended due to non-functional email address
|
12. September 2006 @ 18:19 |
Link to this message
|
I am having a BAD prob with Nero... the ol illegal disc error...
i have been using some memerox DVD-R and they worked... i got done with the dvds and opened a newone and got the error. i read about the media prob so i got some sony DVD-R.. and i get the same error message... ill paste the error log. if anyone can help... please help Chris
********** Nero Recode **********
Version: 2.2.7.5
4C82-0010-8011-0000-0205-2299-4669
Project type: Copy entire DVD
Target size: DVD5 (2282925)
21:16:02 File burn_dvdfiles.cpp, Line 407
Compile DVD: Cancel
Burn settings:
Target: _NEC DVD+-RW ND-6500A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\CRS\Desktop\dvdmovie (39197618176 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
21:16:02 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Menus Vobs [381 vobus] 159.81MB -> 65.66MB [R 0.00]
Video: 60.25MB, extra: 5.41MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 4.35MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.32MB [enabled]
VTS_01 Title Vobs [29 vobus] 9.14MB -> 4.11MB [R 0.00]
Video: 4.05MB, extra: 0.06MB
Audio: 8 streams
0. 0. Dolby Digital 5.1-ch English 0.00MB [enabled]
1. 1. Dolby Digital 5.1-ch English 0.00MB [enabled]
2. 2. Dolby Digital 5.1-ch English 0.00MB [enabled]
3. 3. Dolby Digital 5.1-ch English 0.00MB [enabled]
4. 4. Dolby Digital 5.1-ch English 0.00MB [enabled]
5. 5. Dolby Digital 5.1-ch English 0.00MB [enabled]
6. 6. Dolby Digital 5.1-ch English 0.00MB [enabled]
7. 7. Dolby Digital 5.1-ch English 0.00MB [enabled]
Subpicture: 32 streams
0. 0. Unspecified 0.00MB [enabled]
1. 1. Unspecified 0.00MB [enabled]
2. 2. Unspecified 0.00MB [enabled]
3. 3. Unspecified 0.00MB [enabled]
4. 4. Unspecified 0.00MB [enabled]
5. 5. Unspecified 0.00MB [enabled]
6. 6. Unspecified 0.00MB [enabled]
7. 7. Unspecified 0.00MB [enabled]
8. 8. Unspecified 0.00MB [enabled]
9. 9. Unspecified 0.00MB [enabled]
10. 10. Unspecified 0.00MB [enabled]
11. 11. Unspecified 0.00MB [enabled]
12. 12. Unspecified 0.00MB [enabled]
13. 13. Unspecified 0.00MB [enabled]
14. 14. Unspecified 0.00MB [enabled]
15. 15. Unspecified 0.00MB [enabled]
16. 16. Unspecified 0.00MB [enabled]
17. 17. Unspecified 0.00MB [enabled]
18. 18. Unspecified 0.00MB [enabled]
19. 19. Unspecified 0.00MB [enabled]
20. 20. Unspecified 0.00MB [enabled]
21. 21. Unspecified 0.00MB [enabled]
22. 22. Unspecified 0.00MB [enabled]
23. 23. Unspecified 0.00MB [enabled]
24. 24. Unspecified 0.00MB [enabled]
25. 25. Unspecified 0.00MB [enabled]
26. 26. Unspecified 0.00MB [enabled]
27. 27. Unspecified 0.00MB [enabled]
28. 28. Unspecified 0.00MB [enabled]
29. 29. Unspecified 0.00MB [enabled]
30. 30. Unspecified 0.00MB [enabled]
31. 31. Unspecified 0.00MB [enabled]
VTS_02 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_02 Title Vobs [29 vobus] 9.23MB -> 4.53MB [R 0.00]
Video: 4.48MB, extra: 0.06MB
Audio: 0 streams
Subpicture: 0 streams
VTS_03 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_03 Title Vobs [29 vobus] 9.27MB -> 4.47MB [R 0.00]
Video: 4.41MB, extra: 0.06MB
Audio: 0 streams
Subpicture: 0 streams
VTS_04 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_04 Title Vobs [1243 vobus] 345.40MB -> 170.34MB [R 0.00]
Video: 152.78MB, extra: 17.56MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 15.14MB [enabled]
Subpicture: 0 streams
VTS_05 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_05 Title Vobs [556 vobus] 151.57MB -> 82.20MB [R 0.00]
Video: 74.71MB, extra: 7.49MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 6.41MB [enabled]
Subpicture: 0 streams
VTS_06 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_06 Title Vobs [359 vobus] 99.87MB -> 60.54MB [R 0.00]
Video: 55.56MB, extra: 4.98MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 4.27MB [enabled]
Subpicture: 0 streams
VTS_07 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_07 Title Vobs [613 vobus] 175.29MB -> 97.74MB [R 0.00]
Video: 88.36MB, extra: 9.38MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 8.18MB [enabled]
Subpicture: 0 streams
VTS_08 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_08 Title Vobs [46 vobus] 16.38MB -> 9.86MB [R 0.00]
Video: 6.70MB, extra: 3.16MB
Audio: 2 streams
0. 0. Dolby Digital 5.1-ch English 1.16MB [enabled]
1. 1. DTS 5-ch English 1.91MB [enabled]
Subpicture: 0 streams
VTS_09 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_09 Title Vobs [39 vobus] 11.85MB -> 7.99MB [R 0.00]
Video: 3.99MB, extra: 4.00MB
Audio: 2 streams
0. 0. Dolby Digital 2-ch English 0.44MB [enabled]
1. 1. DTS 5-ch English 3.48MB [enabled]
Subpicture: 0 streams
VTS_10 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_10 Title Vobs [11 vobus] 3.51MB -> 1.54MB [R 0.00]
Video: 1.52MB, extra: 0.02MB
Audio: 0 streams
Subpicture: 0 streams
VTS_11 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_11 Title Vobs [11868 vobus] 5379.89MB -> 3165.91MB [R 0.11]
Video: 1935.33MB, extra: 1230.57MB
Audio: 3 streams
0. 0. Dolby Digital 5.1-ch English 337.07MB [enabled]
1. 1. DTS 5-ch English 567.34MB [enabled]
2. 2. Dolby Digital 5.1-ch French 289.29MB [enabled]
Subpicture: 3 streams
0. 0. English 6.19MB [enabled]
1. 1. Spanish 3.54MB [enabled]
2. 2. French 3.96MB [enabled]
VTS_12 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_12 Title Vobs [11 vobus] 0.93MB -> 0.47MB [R 0.00]
Video: 0.45MB, extra: 0.02MB
Audio: 0 streams
Subpicture: 0 streams
VTS_13 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_13 Title Vobs [17 vobus] 3.79MB -> 1.34MB [R 0.00]
Video: 1.31MB, extra: 0.03MB
Audio: 0 streams
Subpicture: 0 streams
VTS_14 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_14 Title Vobs [24 vobus] 7.26MB -> 3.58MB [R 0.00]
Video: 3.25MB, extra: 0.34MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.29MB [enabled]
Subpicture: 0 streams
VTS_15 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_15 Title Vobs [249 vobus] 72.29MB -> 32.98MB [R 0.00]
Video: 29.42MB, extra: 3.56MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 3.07MB [enabled]
Subpicture: 0 streams
VTS_16 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_16 Title Vobs [3566 vobus] 981.96MB -> 572.43MB [R 0.00]
Video: 524.71MB, extra: 47.71MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 40.75MB [enabled]
Subpicture: 0 streams
VTS_17 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_17 Title Vobs [1173 vobus] 361.15MB -> 171.83MB [R 0.00]
Video: 155.79MB, extra: 16.04MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 13.75MB [enabled]
Subpicture: 0 streams
VTS_18 Menus Vobs [1 vobus] 0.11MB -> 0.02MB [R 0.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_18 Title Vobs [1 vobus] 0.01MB -> 0.01MB [not compressable]
Video: 0.01MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 0 streams
21:16:03 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
21:16:03 File burn_dvdfiles.cpp, Line 451
Using previously transcoded files for burning
21:16:05 File NeroRecorderBase.cpp, Line 1130
Burning 78 files with total size of 4675457024 bytes on hard disk
21:16:05 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
21:16:24 File NeroRecorderBase.cpp, Line 506
Writing to disc: D
4C82-0010-8011-0000-0205-2299-4669
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 0, 1, 2
Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2060AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523476kB)
Free physical memory: 212MB (218076kB)
Memory in use : 58
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.9.2006
NeroAPI
9:16:24 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
9:16:24 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
9:16:24 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
9:16:24 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
9:16:24 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
9:16:24 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:16:24 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:16:24 PM #8 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
9:16:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2283551 (507:27.26, 4460MB)
9:16:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
9:16:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
9:16:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:16:24 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283552 (2283552) = #2283552/507:27.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283552 blocks [D: _NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
9:16:24 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: _NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676714496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283552 | lead-out | 1 | 0x41 | 0x00
9:16:24 PM #15 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:16:24 PM #16 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
9:16:24 PM #17 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
9:16:24 PM #18 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
9:16:24 PM #19 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
9:16:24 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:16:24 PM #21 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
9:16:24 PM #22 Text 0 File MMC.cpp, Line 21611
Set BUFE: JustLink -> ON
9:16:24 PM #23 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
9:16:24 PM #24 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:16:24 PM #25 SPTI -1046 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 22 D8 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
9:16:24 PM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
D: _NEC DVD+-RW ND-6500A
9:16:24 PM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
9:16:24 PM #28 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
21:16:28 File NeroRecorderBase.cpp, Line 936
Burn failed (3)
21:16:28 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
|
|
Advertisement
|
|
|
|
raizer
Newbie
|
13. September 2006 @ 02:45 |
Link to this message
|
Hi, i bought a new laptop and burning dvd's wasn't a problem until i tried DL dvd's. Maybe it's the media but does anyone else see another glitch? Thanks in advance. here is the log.
M Eggink
UT
1A20-031A-0002-2400-4313-1323
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <_NEC DVD_RW ND-7551A> Version: 1-02 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <CI3333B GIV744M >Version: 1.0 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS721080G9SA00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-7551A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CI3333B GIV744M 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-7551A D: CDRom0
CI3333B GIV744M E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1021MB (1046444kB)
Free physical memory: 458MB (469960kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.9.2006
UDF/ISO compilation
12:36:07 #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
12:36:07 #2 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VIDEO_TS.IFO has been modified
12:36:07 #3 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VIDEO_TS.BUP has been modified
12:36:07 #4 Phase 113 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed
12:36:07 #5 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:36:08 #6 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
12:36:08 #7 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
12:36:08 #8 Text 0 File Reader.cpp, Line 124
Reader running
12:36:08 #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:36:08 #10 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:36:08 #11 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
12:36:08 #12 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 2842703 (631:42.53, 5552MB)
12:36:08 #13 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:36:08 #14 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: _NEC DVD_RW ND-7551A, Media type: DVD+R9 Double Layer
12:36:08 #15 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:36:08 #16 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2842704 (2842704) = #2842704/631:42.54
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2842704 blocks [_NEC DVD_RW ND-7551A]
--------------------------------------------------------------
12:36:08 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [_NEC DVD_RW ND-7551A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5821857792, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2842704 | lead-out | 1 | 0x41 | 0x00
12:36:08 #18 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:36:08 #19 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:36:08 #20 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
12:36:08 #21 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
12:36:08 #22 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
12:36:08 #23 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3.324 KB/s)
12:36:08 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:36:08 #25 SPTI -1046 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x02e45800: Len xc
0x00 0A 00 00 00 00 00 00 00 15 B0 A0
12:36:08 #26 Text 0 File DVDPlusDualLayer.cpp, Line 642
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
12:36:08 #27 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
D: _NEC DVD_RW ND-7551A
12:36:08 #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
12:36:08 #29 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3.324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19-5-2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16-5-2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4-8-2004 3:07:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
