|
|
|
Shallow Burn? NEED HELP PLEASE
|
|
|
PittChiq
Newbie
|
6. February 2006 @ 17:58 |
Link to this message
|
|
Hello, thank you in advance for your help boys. Here is this Chix Problem. I'm using vision express 3 to burn torrents opened and converted to avi and sometimes run through dvx, onto a DVD. I have tried several different companies DVDs and Right now I'm using Maxell 8x 4.7. no matter which I use I get a successful burn, but the Burn physically is barley visible and acts as such. The DVDs almost always have difficulty q-ing up in my DVD players, 4 different ones... and If they do play they are likely to stop, freeze and sit trying to re-Find the area they where Just at. So they skip over parts, go back to the beginning, etc. This is with all different types of media, two different burners, and the system set at 1x burn speed.
For the Life of me I cannot find this log file you all request, Ill keep looking.
My burner is a Sony dw-D18A which they have no firmware for from what I can see. But again this is my second burner, the first acted the same way.
the DVDs look untouched when they are done and ANY tiny finger blemish or dust renders them unusable.
Now off to look for that Log File while you Brilliant minds Cure My delema.
Thanks Boys
|
|
Advertisement
|
 |
|
|
|
PittChiq
Newbie
|
7. February 2006 @ 00:06 |
Link to this message
|
|
Ok I found the log File
This message has been edited since posting. Last time this message was edited on 7. February 2006 @ 10:50
|
|
FireKat
Suspended due to non-functional email address
|
7. February 2006 @ 04:24 |
Link to this message
|
Sorry hun, Not a guy here :)
1st. Edit your post to remove all instances of your serial number (dishonest people will steal it to use your program if they can).
2nd remove InCD (that was the problem I had with nero 6).
Make sure to use the incd tool (found here http://ww2.nero.com/nero6/enu/InCD_CleanTool.html ) to remove it completely.
Try again, and we'll see if ya need more info after that.
Reality is an illusion and subject to interpretation.
This message has been edited since posting. Last time this message was edited on 7. February 2006 @ 04:27
|
|
PittChiq
Newbie
|
7. February 2006 @ 10:55 |
Link to this message
|
|
I was too busy to read through the Log file, How many spots is the key posted in? And do I really are if they use my key?? I mean I am no fan of bringing happiness to anyone but as long as Mine works.
|
Senior Member
|
7. February 2006 @ 11:30 |
Link to this message
|
Someone stealing your key could make YOUR version not work, the next time you needed to upgrade you would probably get an error message like this, and here is what Nero says to do:
Quote:
20. After launching Nero I get the error message 'This may be a pirated version of Nero'. What does this mean?
This message occurs if more than one customer has registered the same serial key.
To resolve, please send us an e-mail (sales@nero.com) which includes your name, address, e-mail, your Nero serial number and a proof of purchase.
Our sales team will confirm your valid purchase and provide you another serial number for replacement.
So your own version would not work, until you got it fixed by emailing, and who knows how long they will take to read/get back to you??
You didn't leave the log up for me to look at it, but INCD is a big problem for Nero and as FireKat said, it needs to be removed.
Nero log file locations:
Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.txt
Please do not post the vision express log, as it is a pain to look thru, throws this page formatting off so that you have to scroll to read the stupid thing,, and doesn't report as much as the history log does. wheh, took longer to explain that one, but thats the reason i hate vision logs..
Die CMC Mag!!! |
|
PittChiq
Newbie
|
7. February 2006 @ 19:17 |
Link to this message
|
I'm getting it now. I think I found all the copies of my serial # and removed them, If not, Let me know. Here is the log lady and Gents. I'm still having burning problems despite The removal of IN-CD. So Whats next? Clue #2 for you Pros, After trying to burn another DVD after the removal of IN-CD, The newest disk took 4 tried to Que up in three of my players, including the xbox.Also when it did glitch, it froze EXACTLY where the previous disk had. So I burned a different file One that I knew was a good formated file, and that too froze up.
I have no real pattern to successful burning. I must say with all the factors involved and how compressed the Information is, and knowing how that little laser is trying to engrave its info on that fast spinning media, its a miracle that Any of them work. But It would be nice to get a handle on why you can make ten in a row that are flawless, and then have the next five be unusable.
I am a troubleshooter for an automaker, and this Hobie really leaves me feeling Humbled. I too try and eliminate the x factor in my line of work, usually this perminantly alleviates a symptom. Not so in the world Of DVD burning.
Thanks again in advance for your kindness and help folks,
PittChiq
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 176MB (180764kB)
Memory in use : 65
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.1.2006
NeroAPI
7:13:28 AM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
7:13:28 AM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
7:13:28 AM #3 Text 0 File Reader.cpp, Line 127
Reader running
7:13:28 AM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D18A running
7:13:28 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:13:28 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:13:28 AM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
7:13:28 AM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 919151 (204:15.26, 1795MB)
7:13:28 AM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
7:13:28 AM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
7:13:28 AM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:13:28 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 919152 (919152) = #919152/204:15.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 919152 blocks [SONY DVD RW DW-D18A]
--------------------------------------------------------------
7:13:28 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1882423296, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
919152 | lead-out | 1 | 0x41 | 0x00
7:13:29 AM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
7:13:29 AM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
7:13:29 AM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
7:13:29 AM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
7:13:29 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:13:29 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
7:13:29 AM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
7:13:29 AM #21 Phase 98 File APIProgress.cpp, Line 276
Start formatting disc before burning
7:13:49 AM #22 Phase 100 File APIProgress.cpp, Line 276
Formatting disc was successful
7:13:49 AM #23 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
7:19:31 AM #24 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D18A > start writing Lead-Out at LBA 919152 (E0670h), lenght 0 blocks
7:19:31 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:19:32 AM #26 Text 0 File DVDPlusRW.cpp, Line 883
Media-Format will be stopped after burning
7:19:32 AM #27 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
7:19:38 AM #28 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
7:19:38 AM #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=?.?.?.?, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=?.?.?.?, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=?.?.?.?, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=?.?.?.?, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 171MB (175948kB)
Memory in use : 66
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.1.2006
NeroAPI
10:10:26 AM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:10:26 AM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:10:26 AM #3 Text 0 File Reader.cpp, Line 127
Reader running
10:10:26 AM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D18A running
10:10:26 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:10:27 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:10:27 AM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:10:27 AM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1955615 (434:34.65, 3819MB)
10:10:27 AM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:10:27 AM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
10:10:27 AM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:10:27 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1955616 (1955616) = #1955616/434:34.66
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1955616 blocks [SONY DVD RW DW-D18A]
--------------------------------------------------------------
10:10:27 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4005101568, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1955616 | lead-out | 1 | 0x41 | 0x00
10:10:29 AM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:10:29 AM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:10:29 AM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:10:30 AM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
10:10:30 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:10:30 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
10:10:30 AM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:10:30 AM #21 Phase 98 File APIProgress.cpp, Line 276
Start formatting disc before burning
10:10:51 AM #22 Phase 100 File APIProgress.cpp, Line 276
Formatting disc was successful
10:10:51 AM #23 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:22:53 AM #24 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D18A > start writing Lead-Out at LBA 1955616 (1DD720h), lenght 0 blocks
10:22:53 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:22:54 AM #26 Text 0 File DVDPlusRW.cpp, Line 883
Media-Format will be stopped after burning
10:22:54 AM #27 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
10:23:00 AM #28 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:23:00 AM #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 111MB (114676kB)
Memory in use : 78
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.2.2006
NeroAPI
8:45:01 AM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
8:45:01 AM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
8:45:02 AM #3 Text 0 File Reader.cpp, Line 127
Reader running
8:45:02 AM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D18A running
8:45:02 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:45:02 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:45:02 AM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:45:02 AM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2046431 (454:45.56, 3996MB)
8:45:02 AM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:45:02 AM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
8:45:02 AM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:45:02 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2046432 (2046432) = #2046432/454:45.57
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2046432 blocks [SONY DVD RW DW-D18A]
--------------------------------------------------------------
8:45:02 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4191092736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2046432 | lead-out | 1 | 0x41 | 0x00
8:45:05 AM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
8:45:05 AM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:45:05 AM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
8:45:05 AM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
8:45:05 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:45:05 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
8:45:05 AM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
8:45:05 AM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
8:53:09 AM #22 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D18A > start writing Lead-Out at LBA 2046432 (1F39E0h), lenght 0 blocks
8:53:09 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:53:34 AM #24 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
8:53:34 AM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 197MB (202484kB)
Memory in use : 61
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.2.2006
NeroAPI
2:43:58 AM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:43:58 AM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
2:43:58 AM #3 Text 0 File Reader.cpp, Line 127
Reader running
2:43:58 AM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D18A running
2:43:58 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:43:59 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:43:59 AM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
3:00:24 AM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 743823 (165:17.48, 1452MB)
3:00:24 AM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
3:00:24 AM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
3:00:24 AM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
3:00:24 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 743824 (743824) = #743824/165:17.49
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 743824 blocks [SONY DVD RW DW-D18A]
--------------------------------------------------------------
3:00:24 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1523351552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
743824 | lead-out | 1 | 0x41 | 0x00
3:00:25 AM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
3:00:25 AM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
3:00:25 AM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
3:00:25 AM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
3:00:25 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:00:25 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
3:00:25 AM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
3:00:25 AM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
3:04:26 AM #22 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D18A > start writing Lead-Out at LBA 743824 (B5990h), lenght 0 blocks
3:04:26 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:04:48 AM #24 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
3:04:48 AM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 199MB (204768kB)
Memory in use : 60
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.2.2006
NeroAPI
2:41:58 AM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:41:59 AM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
2:42:00 AM #3 Text 0 File Reader.cpp, Line 127
Reader running
2:42:00 AM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D18A running
2:42:00 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:42:00 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:42:00 AM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:42:01 AM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1669951 (371:06.01, 3261MB)
2:42:01 AM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
2:42:01 AM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
2:42:01 AM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:42:01 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1669952 (1669952) = #1669952/371:6.2
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1669952 blocks [SONY DVD RW DW-D18A]
--------------------------------------------------------------
2:42:01 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3420061696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1669952 | lead-out | 1 | 0x41 | 0x00
2:42:22 AM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:42:22 AM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:42:22 AM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:42:22 AM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
2:42:22 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:42:22 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
2:42:22 AM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
2:42:22 AM #21 Phase 98 File APIProgress.cpp, Line 276
Start formatting disc before burning
2:42:43 AM #22 Phase 100 File APIProgress.cpp, Line 276
Formatting disc was successful
2:42:43 AM #23 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
2:55:51 AM #24 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D18A > start writing Lead-Out at LBA 1669952 (197B40h), lenght 0 blocks
2:55:51 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:55:52 AM #26 Text 0 File DVDPlusRW.cpp, Line 883
Media-Format will be stopped after burning
2:55:52 AM #27 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
2:55:58 AM #28 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
2:55:58 AM #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 166MB (170756kB)
Memory in use : 67
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.2.2006
NeroAPI
5:49:23 AM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
5:49:23 AM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
5:49:24 AM #3 Text 0 File Reader.cpp, Line 127
Reader running
5:49:24 AM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D18A running
5:49:24 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:49:24 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:49:24 AM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
5:49:24 AM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2220287 (493:23.62, 4336MB)
5:49:24 AM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
5:49:24 AM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
5:49:24 AM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:49:24 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2220288 (2220288) = #2220288/493:23.63
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2220288 blocks [SONY DVD RW DW-D18A]
--------------------------------------------------------------
5:49:24 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4547149824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2220288 | lead-out | 1 | 0x41 | 0x00
5:49:26 AM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
5:49:26 AM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
5:49:26 AM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
5:49:26 AM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
5:49:26 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:49:26 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
5:49:26 AM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
5:49:26 AM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
6:00:23 AM #22 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D18A > start writing Lead-Out at LBA 2220288 (21E100h), lenght 0 blocks
6:00:23 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:00:49 AM #24 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
6:00:49 AM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 110MB (113232kB)
Memory in use : 78
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.2.2006
NeroAPI
10:23:55 AM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:23:56 AM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:23:56 AM #3 Text 0 File Reader.cpp, Line 127
Reader running
10:23:56 AM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D18A running
10:23:57 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:23:57 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:23:57 AM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:25:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2046047 (454:40.47, 3996MB)
12:25:14 PM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:25:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
12:25:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
12:25:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2046048 (2046048) = #2046048/454:40.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2046048 blocks [SONY DVD RW DW-D18A]
--------------------------------------------------------------
12:25:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4190306304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2046048 | lead-out | 1 | 0x41 | 0x00
12:25:15 PM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
12:25:16 PM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:25:16 PM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
12:25:16 PM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
12:25:16 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:25:16 PM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:25:16 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
12:25:16 PM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
12:35:31 PM #22 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D18A > start writing Lead-Out at LBA 2046048 (1F3860h), lenght 0 blocks
12:35:32 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:35:57 PM #24 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
12:35:57 PM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 88MB (90964kB)
Memory in use : 82
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.2.2006
NeroAPI
9:58:02 PM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
9:58:02 PM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
9:58:02 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
9:58:02 PM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D18A running
9:58:02 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:58:03 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:58:03 PM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:37:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2025407 (450:05.32, 3955MB)
11:37:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:37:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
11:37:09 PM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
11:37:09 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2025408 (2025408) = #2025408/450:5.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2025408 blocks [SONY DVD RW DW-D18A]
--------------------------------------------------------------
11:37:09 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4148035584, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2025408 | lead-out | 1 | 0x41 | 0x00
11:37:09 PM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
11:37:09 PM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:37:09 PM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
11:37:09 PM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
11:37:09 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:37:09 PM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:37:09 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
11:37:09 PM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
11:45:39 PM #22 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D18A > start writing Lead-Out at LBA 2025408 (1EE7C0h), lenght 0 blocks
11:45:39 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:46:04 PM #24 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
11:46:04 PM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.10
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 217MB (222800kB)
Memory in use : 57
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.2.2006
NeroAPI
10:22:13 AM #1 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
10:22:13 AM #2 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:22:13 AM #3 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
10:22:13 AM #4 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:22:16 AM #5 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:22:16 AM #6 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:22:16 AM #7 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:22:16 AM #8 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: No
10:22:16 AM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 934
Can only write at 8x (11,080 KB/s) instead of 897.9x (1,239,116 KB/s) to current disc.
10:22:16 AM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
Estimated filesystem size: 544
10:22:16 AM #11 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
10:22:16 AM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1686
Buffering files started
10:22:16 AM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1407
Buffering VIDEO_TS.VOB
10:22:16 AM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2562
Finished buffering file VIDEO_TS.VOB of size 149504 bytes (73 sectors)
10:22:16 AM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VIDEO_TS.VOB of size 149504 bytes (73 sectors)
10:22:16 AM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2642
Buffering files finished successfully
10:22:41 AM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 0. Length: 672
10:22:41 AM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1869
Reserved start fragment at 0
10:22:41 AM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 672. Length: 64
10:22:41 AM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_1.VOB at sector 736
11:15:54 AM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors)
11:15:54 AM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_2.VOB
11:15:54 AM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_2.VOB at sector 525023
12:02:11 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors)
12:02:11 PM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_3.VOB
12:02:11 PM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_3.VOB at sector 1049310
12:45:16 PM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors)
12:45:16 PM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_4.VOB
12:45:16 PM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_4.VOB at sector 1573597
1:26:36 PM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_4.VOB of size 1073739776 bytes (524287 sectors)
1:26:36 PM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_5.VOB
1:26:36 PM #32 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_5.VOB at sector 2097884
1:33:08 PM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_5.VOB of size 246740992 bytes (120479 sectors)
1:33:08 PM #34 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_0.BUP at sector 2218363
1:33:08 PM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_0.BUP of size 73728 bytes (36 sectors)
1:33:09 PM #36 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_0.IFO at sector 672
1:33:14 PM #37 Text 0 File BurnAtOnceRecorder.cpp, Line 2609
Successfully released fragment at 672
1:33:14 PM #38 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_0.IFO of size 73728 bytes (36 sectors)
1:33:15 PM #39 Text 0 File BurnAtOnceRecorder.cpp, Line 1407
Buffering VIDEO_TS.IFO
1:33:15 PM #40 Text 0 File BurnAtOnceRecorder.cpp, Line 2571
Finished buffering file VIDEO_TS.IFO of size 12288 bytes (6 sectors)
1:33:15 PM #41 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VIDEO_TS.IFO of size 12288 bytes (6 sectors)
1:33:15 PM #42 Text 0 File BurnAtOnceRecorder.cpp, Line 1407
Buffering VIDEO_TS.BUP
1:33:15 PM #43 Text 0 File BurnAtOnceRecorder.cpp, Line 2571
Finished buffering file VIDEO_TS.BUP of size 12288 bytes (6 sectors)
1:33:15 PM #44 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VIDEO_TS.BUP of size 12288 bytes (6 sectors)
1:33:15 PM #45 Phase 175 File APIProgress.cpp, Line 276
Finalizing disc started
1:33:15 PM #46 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:33:15 PM #47 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:33:15 PM #48 Text 0 File BurnAtOnceRecorder.cpp, Line 3247
Writing filesystem of size 1114112 at sector 0
1:33:16 PM #49 Text 0 File BurnAtOnceRecorder.cpp, Line 2943
Writing VIDEO_TS.IFO at sector 544
1:33:16 PM #50 Text 0 File BurnAtOnceRecorder.cpp, Line 3171
Writing VIDEO_TS.VOB at sector 560
1:33:16 PM #51 Text 0 File BurnAtOnceRecorder.cpp, Line 2971
Writing VIDEO_TS.BUP at sector 640
1:33:38 PM #52 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048E5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
1:33:38 PM #53 Phase 177 File APIProgress.cpp, Line 276
Disc finalized successfully
1:33:42 PM #54 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-D18A> Version: VYS2 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D18A E: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 158MB (161900kB)
Memory in use : 69
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.2.2006
NeroAPI
10:17:04 PM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:17:05 PM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048C5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:17:05 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
10:17:05 PM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D18A running
10:17:05 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:17:05 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:17:05 PM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:17:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2216431 (492:32.31, 4328MB)
10:17:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:17:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
10:17:05 PM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:17:05 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2216432 (2216432) = #2216432/492:32.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216432 blocks [SONY DVD RW DW-D18A]
--------------------------------------------------------------
10:17:05 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4539252736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2216432 | lead-out | 1 | 0x41 | 0x00
10:17:08 PM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:17:08 PM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:17:08 PM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:17:08 PM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
10:17:08 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:17:08 PM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:17:08 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048C5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:17:08 PM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:26:21 PM #22 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D18A > start writing Lead-Out at LBA 2216432 (21D1F0h), lenght 0 blocks
10:26:21 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:26:47 PM #24 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048C5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:26:47 PM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/2/2005 9:59:37 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
|
PittChiq
Newbie
|
7. February 2006 @ 19:23 |
Link to this message
|
|
Hope thats the Log your Requested, its anything but Short.
Off to burn a cd on my Acer tablet, another Help Hog.
Pitt
|
|
FireKat
Suspended due to non-functional email address
|
7. February 2006 @ 20:39 |
Link to this message
|
ok hun, the next step is to dl and run a few tools (do not use the clean tools [except driver clean tool] unless you want to uninstall something). Make sure you dl and run the registry checker to make sure there are no errors that can be solved simply by running the tools.
Nero tools can be downloaded here ( http://ww2.nero.com/nero6/enu/Utilities.html ).
The nero tools could fix it.
I am still in the proccess of fixing my Nero 7 but have successfully fixed my Nero 6. My desktop is burning a movie right now, but I'll get more info on the dl's you may need when it's done (or tomorrow if I go back to bed before it's done (have to be up early to get my daughter off to school).
Reality is an illusion and subject to interpretation.
This message has been edited since posting. Last time this message was edited on 7. February 2006 @ 20:41
|
Senior Member
|
7. February 2006 @ 21:08 |
Link to this message
|
That is strange that they all show burned successful in the logs. Maybe your power supply in the CPU is overtaxed and not supplying enough voltage to the laser. I have heard that one before, and most of the time it is not true, but sometimes you can have a problem with a power supply and that would affect both burners. Just a stab in the dark. A quick check of the log, and i didnt see anything jump out at me.
These errors seem to indicate something was done incorrectly in one of your file coversion steps
Quote:
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
and that code comes out as Quote:
Invalid field in CDB
which leads me to belive there was something wrong in the file conversion, and i dont covert torrents, so i wont be of much help there. They show up in most of your burn logs.
Also check your system aspi layers with Nero info tool. They should report back as being installed and working properly. Your log didn't show them as being bad, but it is worth checking.
You should see something like this on your info tool:
And just to eliminate media as the problem try a Verbatim or a Taiyo Yuden disc. The Tys are found under Sony, Maxell, Fuji, labels ONLY if you find made in japan on the spindle. Anything less, and you could still be having a media issue.
Most of the burns in the log were at 8x, and you should stick with 4x burns as that is the speed most burners and systems handle best. If you still get light burns, and problems using GOOD media, then you may have either very dirty lasers, or weak power going to them. Unless you like taking a multi-meter to your power supply to check the output voltage, the best way to fix those problems is to replace the power supply. But try the GOOD media test first at 4x burn. Your memory was a little bit low, so make sure you shut down everything not needed when burning, and shut down any anti-virus/firewall/net connection, etc..
Die CMC Mag!!!
|
|
PittChiq
Newbie
|
8. February 2006 @ 00:37 |
Link to this message
|
|
MM.. although I agree that that the Power supply prob would be a one in a million shot, It is a crappy dell machine, and It is taxed with about six eight usb devices, 3 hard drives plus an external, and my network usb antenna. so Out comes the volt meter. but I will try the Japanese disks and unplugging everything including the hd's.
Need a better Media picking lesson. If your at the local store and the spindle is in wrapping, how do I know which to pick??? Where exactly are they marked? besides made in Japan, does that Brand actually exist as a stand alone?
thanks
|
Senior Member
|
8. February 2006 @ 06:45 |
Link to this message
|
As far as media on the brands i listed country of origin, is usually right next to the bar code on most of them. On others you have to look, but it is on the package somewhere. The only sure way to get Taiyo Yudens is to order them online. I get my online media from http://www.supermediastore.com . They carry genuine Taiyo Yudens.
To see if the power supply is loaded down too much, disconnect as many of those devices you listed as you can, and see if that makes a difference. You can plug them back in after the burn. Take as much of the load off the power supply as you can by removing extra devices.
Yes, this kind of problem is rare as you either have enough power, or you dont. Usually if you don't have enough power, the thing doesn't work at all. You could probably test voltage on a spare device power lead while it is running, if you have any spares left in the computer case.
Try the better discs first. If you want to try a GOOD disc, and dont want to try to find the Taiyo Yudens, just buy a Verbatim , and made in taiwan is OK for Verbs.
If you are in the states, best buy just had these on sale for 15 per 50, but that was last weeks sale.
***edit***
Put in correct link to supermediastore.com
Die CMC Mag!!!
This message has been edited since posting. Last time this message was edited on 17. March 2006 @ 12:39
|
|
PittChiq
Newbie
|
10. February 2006 @ 00:29 |
Link to this message
|
|
OK I'm very stumped. Here's what I have done. First I disconnected everything from my burning computer, every extra, then I defragmented the one standing HD. I then tried burning both the maxell Media I have, and the the brandy new stack of Asian verbatim's I went out and bought. Still a very shallow and unreadable burn. So I then Removed the 400w power supply and exchange it with a huge one a friend loaned me. Nothing has changed. I still had one successful DVD, and 3 coasters. my par.
|
Senior Member
|
10. February 2006 @ 02:24 |
Link to this message
|
|
|
PittChiq
Newbie
|
14. March 2006 @ 00:13 |
Link to this message
|
I want to thank you for the links and dl's. I want to thank you all. But nothing Seems to make a difinitive difference. I mean there have been dvd's that work like a store bought,sure. Even three and five in a row. But then Crash pow, same problem. And Whats funny is I see other people claiming the exact same Problem on two other sites. My friend who had< key word, says all was fixed using Nero 7. I have it. But I am cautious to insatall because more people have retreated from seven back to six then they did during battles against british Rule. I don't have much to loose. I have been making and burning media since the very first Cd's. I love the Idea. I just think in this day and age, with 4oo,000,0000,x over that we should have an almost fail safe program that makes a DVD and CD without Sweating and crossing your fingers and voodoo etc.
|
Senior Member
|
14. March 2006 @ 04:16 |
Link to this message
|
I agree, backing up DVDs should be as easy as ripping a CD, but it isnt for a number of reasons. The good news is the latest version of Nero 7 is not buggy now. I waited for 2 version 7 revisions to pass before i updated. With Nero updates, its always good to come here and check the Nero forum to see if ppl are having problems before you update. I also save the old install packages of Nero as a just in case thing. (call me paranoid, but with Nero it pays to be paranoid) Give 7 a try, as you say, you have nothing to loose.
If one day you have a spare 40-80 bucks, you could buy a new burner and see if that helps. But thats a "cost you money" option, and i try to avoid suggesting that unless you really need a new burner.
Die CMC Mag!!!
|
|
PittChiq
Newbie
|
14. March 2006 @ 17:22 |
Link to this message
|
Thats whats bugging me, I tried not only changing burners, I tried changing hard drives!~ I fig maybe With all my firewalls and blockers, virus repairs etc, that maybe I was missing something, or an old virus had a dll or two in there messing me up, or something needed was deleted as infected. So i pulled the Hd and Tried another one with a fresh xp professional install. same thing, coaster...
Ok I shall try the seven. thanks
|
Senior Member
|
17. March 2006 @ 12:38 |
Link to this message
|
@PittChiq,
Looking at that last burn log, INCD was removed. Did you use a clean tool, or just un-install?
You can run the clean tool and it will find any hidden INCD stuff on your system:
http://www.nero.com/nero6/enu/InCD_CleanTool.html
Just a stab in the dark, but i am running out of ideas for you. Maybe the Nero7 update will work.
And you already checked you system aspi files with nero infotool? Thats the only other thing i could think of, and you didnt reply back if you checked that.
I also edited the online link to media. I keep getting supermedia.com mixed up with the real supermediastore.com. Sorry about that.
Die CMC Mag!!!
This message has been edited since posting. Last time this message was edited on 17. March 2006 @ 12:38
|
|
Advertisement
|
|
|
|
PittChiq
Newbie
|
30. March 2006 @ 21:31 |
Link to this message
|
Hello, Just wanted to give you a heads up on my mystery. I installed Nero 7 and have had no problems since. My only standing issue is that the Hp invent gold R+ disks that where on sale at staples still are not recognized on my player. They do work on others players though. Not a Coaster to be spoken of. So thanks Max, FireKat, and especially whompus for the very hard to find firmware. Well I'm off to make movies! thanks. again,
Kisses,
PittChiq
|
|
