|
CPU overheating i need advise
|
|
|
Frank226
Newbie
|
19. February 2006 @ 12:47 |
Link to this message
|
|
Hello,
I just bought a new system and i have a cpu overheating problem
MBoard: Gigabyte GA-K8U uli M1689 chipset
CPU : AMD 64 3700 Clawhammer Socket 754
CPU Fan: Fanner Tech AMD K8 Cooler Fan
My CPU jump from 45C Idle to 65C instantly when it load
The Heatsink does'nt fell hot at all
The rest of the sensor are Ok around 29 Celcius
What should i buy then to cool it?
Thank you!
|
|
Advertisement
|
 |
|
|
|
Frank226
Newbie
|
19. February 2006 @ 12:51 |
Link to this message
|
|
Also i have to mention, my motherboard seem a little bit tricky... the mounting around my cpu is made of plastic and does'nt seem to be removable... ?
Gigabyte GA-k8U ULI m1689 Chipset
|
|
SypherTek
Suspended due to non-functional email address
|
19. February 2006 @ 23:58 |
Link to this message
|
|
if your heatsink isnt heating up you dont need to buy anything you need to install it properly.
take it off, clean away any thermal paste from the base of the heatsink and the top of the processor, put a fresh thin layer of paste on and correctly install the heatsink and you shouldnt have any more problems. provided that you bought the correct fan in the first lace that is
Studio Comp: AMD Athlon XP 3200+ OC ~ 2.35GHz runs at 40 celcius idle and 48 under stress (aerocool GT1000 really works!), Asrock K7VT4A , 1024MB Dual Channel DDR 400, MSI Nvidia FX5200 128MB OC ~ 600MHz mem 350MHz core,80GB SATA + 200GB SATA + 120GB IDE, 7.1 Channel Soundblaster Audigy 2 Platinum EX sound and midi interface. 19" Sony SDM-HS95 TFT monitor - sweeet
Comp2: AMD Sempron 2400+ OC ~ 2.0GHz (Stable), Asrock K7S41GX, 512MB DDR 333, Onboard Graphics, 40GB Maxtor IDE
set of monitors on the way soon :P
Google is your friend...
WorkComp: LAPTOP, intel celeron D 2.4GHz, 256MB DDR, 20GB hd. NO SCREEN IT WAS SAWN OFF :S (bag of crap) This message has been edited since posting. Last time this message was edited on 20. February 2006 @ 00:03
|
|
Frank226
Newbie
|
23. February 2006 @ 07:14 |
Link to this message
|
|
I bought a zalman 9500 and i fixed it with arctic 5 paste...
Now i still got problem
43 C idle
59 C loading
How much paste is it needed on the Cpu ?
Is it normal that my cpu jump instantly from 43 to 59?
Is that Temperature acceptable for an amd 64 3700 ?
|
Senior Member
|
23. February 2006 @ 08:46 |
Link to this message
|
|
you should only use a drop of paste to much will result in the same result as two little, amd processors should not be that hot as will shorten there life span, so u fixed a new fan and still the same problem, is it just one programme reporting or have u tried various cuz sometimes so report a load of bs try this its free and good www.majorgeeks.com/download4181.html
System 1 :- Main PC: AMD XP 3200+ - OC Slightly 2.31Ghz, 1024 MB DDR PC2700, 1 x 40GB Hard Drive, 1 x 60GB Hard Drive, ATI 9600XT (256 MB)Graphics Card.
Laptop 1: 1GB DDR2 Ram, 100Gb Samsung HDD, ATI X700 128mb Graphics Card.
System 2: Downloading PC: AMD Sempron 2500+, 512 MB DDR PC2700, 1 x 40GB Hard Drive.
|
|
Frank226
Newbie
|
23. February 2006 @ 09:06 |
Link to this message
|
|
I tried speedfan and Everest Home edition
They tells me the same thing or pretty close
at first i installed it with a Fanner Tech Amd k8 Cooler with the paste that came with it
this is a regular aluminum heatsink with fan.
My temps reading were
45C idle
67C loading
Then i bought a Zalman 9500 and i fixed it with Arctic 5 thermal paste.
Temps reading now
45C idle
59C loading
We can see that it is much better with zalman and arctic 5 but it is still close to critical temperature (70C)
All my others reading are below 30C
|
Senior Member
|
23. February 2006 @ 09:11 |
Link to this message
|
|
does it install ok and theres not air pockets in between>
System 1 :- Main PC: AMD XP 3200+ - OC Slightly 2.31Ghz, 1024 MB DDR PC2700, 1 x 40GB Hard Drive, 1 x 60GB Hard Drive, ATI 9600XT (256 MB)Graphics Card.
Laptop 1: 1GB DDR2 Ram, 100Gb Samsung HDD, ATI X700 128mb Graphics Card.
System 2: Downloading PC: AMD Sempron 2500+, 512 MB DDR PC2700, 1 x 40GB Hard Drive.
|
|
Frank226
Newbie
|
23. February 2006 @ 09:17 |
Link to this message
|
|
Yes pretty sure it is well installed
The Fan even stay stuck on it so i think there is a good contact between thems.
|
|
Frank226
Newbie
|
23. February 2006 @ 12:44 |
Link to this message
|
|
i tried to re-install the fan on my cpu, wipe out the thermal paste and do it again. I get the same results...
I am sure that the fan is properly installed.
Ill give you my specs here:
AMD 3700 clawhammer socket 754
GA-K8U ULI M1689 CHipset motherboard version 1.1
Ultra 1024 MB PC3200 DDR 400 Mhz
Maxtor 80 GB EIDE
12 mm fan on the back
1 small on the side
1 small on the front
Zalman 9500 CPU Fan with Artic 5 paste
EVEREST HOME EDITION READINGS
Sensor Properties
Sensor Type SMSC LPC47M192/997 (SMBus 2Dh)
Temperatures
Motherboard 29 °C (84 °F)
CPU 44 °C (111 °F)
Aux 28 °C (82 °F)
Maxtor 6L080P0 28 °C (82 °F)
Cooling Fans
CPU 2508 RPM
Voltage Values
CPU Core 1.54 V
+1.5 V 1.67 V
+2.5 V 2.58 V
+3.3 V 3.32 V
+5 V 5.10 V
+12 V 12.19 V
Debug Info F FF FF FF FF 00 FF 00 FF
Debug Info T CA 2D 1D 1C
Debug Info V C6 83 C1 C4 C3
If Anywone can help feel free it would be greatly appreciated!
Thank you
Frank
|
Senior Member
|
23. February 2006 @ 13:43 |
Link to this message
|
|
Have u oced that as the core seems to be a tiny bit high?
System 1 :- Main PC: AMD XP 3200+ - OC Slightly 2.31Ghz, 1024 MB DDR PC2700, 1 x 40GB Hard Drive, 1 x 60GB Hard Drive, ATI 9600XT (256 MB)Graphics Card.
Laptop 1: 1GB DDR2 Ram, 100Gb Samsung HDD, ATI X700 128mb Graphics Card.
System 2: Downloading PC: AMD Sempron 2500+, 512 MB DDR PC2700, 1 x 40GB Hard Drive.
|
|
Frank226
Newbie
|
23. February 2006 @ 13:47 |
Link to this message
|
|
What would be the normal reading 1.5 V ?
|
Senior Member
|
23. February 2006 @ 13:51 |
Link to this message
|
|
sorry my bad misread your 1.54 lol it to late in the night he he, still has it been overclocked?
System 1 :- Main PC: AMD XP 3200+ - OC Slightly 2.31Ghz, 1024 MB DDR PC2700, 1 x 40GB Hard Drive, 1 x 60GB Hard Drive, ATI 9600XT (256 MB)Graphics Card.
Laptop 1: 1GB DDR2 Ram, 100Gb Samsung HDD, ATI X700 128mb Graphics Card.
System 2: Downloading PC: AMD Sempron 2500+, 512 MB DDR PC2700, 1 x 40GB Hard Drive.
|
|
Frank226
Newbie
|
23. February 2006 @ 13:55 |
Link to this message
|
|
No it is not overclocked
|
|
Frank226
Newbie
|
23. February 2006 @ 14:00 |
Link to this message
|
|
Something weird with my idle temps, it is the same reading even if i changed the fan.
45C
45C
??? but on load i dropped 8 Celcius...
|
Senior Member
|
23. February 2006 @ 14:08 |
Link to this message
|
System 1 :- Main PC: AMD XP 3200+ - OC Slightly 2.31Ghz, 1024 MB DDR PC2700, 1 x 40GB Hard Drive, 1 x 60GB Hard Drive, ATI 9600XT (256 MB)Graphics Card.
Laptop 1: 1GB DDR2 Ram, 100Gb Samsung HDD, ATI X700 128mb Graphics Card.
System 2: Downloading PC: AMD Sempron 2500+, 512 MB DDR PC2700, 1 x 40GB Hard Drive.
|
|
Frank226
Newbie
|
23. February 2006 @ 14:37 |
Link to this message
|
|
Yes i had to remove the pushpins and insert what they call 2 nipples :)
then you fix the fan to the support with 2 screw that goes in the nipples holes. It was quite laborious but it is well explain and the quality of the components is great.
|
Senior Member
|
23. February 2006 @ 14:42 |
Link to this message
|
|
so theres a clean seal between the cpu and the heat sink, you followed the instructions to install it to the very end, ui applied thermal past correctly and its still showing as Hot. Im clean out of surgestions. What does bios ay when it has temp? try leaving it for a few mins in bios mode with the temp on and see if it goes up at all.
System 1 :- Main PC: AMD XP 3200+ - OC Slightly 2.31Ghz, 1024 MB DDR PC2700, 1 x 40GB Hard Drive, 1 x 60GB Hard Drive, ATI 9600XT (256 MB)Graphics Card.
Laptop 1: 1GB DDR2 Ram, 100Gb Samsung HDD, ATI X700 128mb Graphics Card.
System 2: Downloading PC: AMD Sempron 2500+, 512 MB DDR PC2700, 1 x 40GB Hard Drive.
|
|
Frank226
Newbie
|
24. February 2006 @ 03:38 |
Link to this message
|
|
In BIOS mode it does'nt go more than 33 Celcius
The system temp indicate 28 Celcius
With theses reading i would'nt mind but, when it comes to load something why it jump isntantly up to 60 Celcius?
|
Senior Member
|
24. February 2006 @ 05:11 |
Link to this message
|
|
its a mysterie to me, but u could try to get an even balence of airflow, so moving a fan around, and c it that makes any difference. But apart from then i would be pissed at spending all the money and nothing happening.
System 1 :- Main PC: AMD XP 3200+ - OC Slightly 2.31Ghz, 1024 MB DDR PC2700, 1 x 40GB Hard Drive, 1 x 60GB Hard Drive, ATI 9600XT (256 MB)Graphics Card.
Laptop 1: 1GB DDR2 Ram, 100Gb Samsung HDD, ATI X700 128mb Graphics Card.
System 2: Downloading PC: AMD Sempron 2500+, 512 MB DDR PC2700, 1 x 40GB Hard Drive.
|
|
Advertisement
|
|
|
|
Frank226
Newbie
|
24. February 2006 @ 08:01 |
Link to this message
|
|
|
