|
|
|
Getting Nero burn errors on Sony DRU-710A BYX5 F/W
|
|
|
esd_2k
Newbie
|
21. February 2006 @ 19:33 |
Link to this message
|
I can't figure it out. I used to use the stock Sony DRU-710A BY01 firmware for over a year and burned over 100 DVD±R's with no problem, then I used Omnipatcher to modify the BY01 firmare with a write strategy change for 2x writing on UME-01 (low grade media) and also applied recommended media tweaks, enabled auto-bitsetting, multi-color led scheme, enabled cross-flashing, and increased DVD read speeds. Immediately after doing this I burned my first coaster, since then I tried many different firmware configurations to try and figure out what might fix the coaster burning problem, including trying disabling media learning, and reverting back to stock BY01 and stock BYX5 firmwares, none of which have done the trick, so now I am running stock BYX5 firmware and still burning coasters about half of the time. I began saving the error logs from nero 3 coasters ago and I have linked to them rather than pasting them here to keep this post short.
http://bellsouthpwp2.net/c/h/chrisbrownell/burn_errors/burn%20err...
http://bellsouthpwp2.net/c/h/chrisbrownell/burn_errors/burn%20err...
http://bellsouthpwp2.net/c/h/chrisbrownell/burn_errors/burn%20err...).txt
http://bellsouthpwp2.net/c/h/chrisbrownell/burn_errors/burn%20err...
|
AfterDawn Addict
|
22. February 2006 @ 01:07 |
Link to this message
|
@esd_2k
Quote:
Nero API version: 7.0.1.2
Maybe you can try to search for an update to 7.0.1.4 or 7.0.1.4B at the Nero forum. These 2 versions seems to be the best so far. However, DON'T update to the latest of Nero 7.0.5.4 because that version has tons and tons of bugs.
Quote:
10:59:28 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
10:59:28 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
You're missing some parts in the middle of the 2 above messages.
Below is what I have, again, it's taken from a "successful burned log of mine".
1:48:44 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
Quote:
Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
Again, it won't hurt to try other top notch media (i.e. YUDEN, Verbatim and Hitachi Maxell). Evidently, I've seen more failures from Ritek than any of the high quality I've mentioned.
Quote:
11:05:49 PM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)
Try lower down your burn speed to 4X next time. It is the best and most recommended speed for burning here at AD. However, the choice is yours. It is true that you can still burn at 8X with current firmware and any high quality media, but it is wise to burn at 4X to avoid getting "coasters".
Quote:
G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1B 57 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x00ba0000: Len x10000
0x00 00 01 BA 44 23 CC C7 1D 59 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 E8 39 51 5B 9B ED FC 7F 46
0x65 7D C2 AA 16 7A 0D 81 8D 14 01 77 C1 90 3E A8
11:13:08 PM #29 CDR -1135 File Writer.cpp, Line 302
Write error
G: SONY DVD RW DRU-710A
Since your target/destination is G: your SONY DRU 710 burner with the blank (Ritek), it is definitely the media on this case, specially when it stated "KEY_MEDIUM_ERROR". Because your firmware is correct (BYX5), that's the same as mine. See above reply for other high quality media.
Quote:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
You need to dump that InCD driver or program, it won't do any good to you, especially if you have Nero on your system. It will only conflict with Nero, and therefore, you're likely to create "coasters". Go to Nero's website and get InCD clean tool to run and completely wipe out InCD from your system.
I think there is a possibility that the media (Ritek) you're using has some sort of defected dye. I know Ritek is decent, but lately I've seen tons of failured burns from Ritek when Newbies/members posted their Nero logs at the Nero forum or DVD Shrink forum. Maybe you can try other high quality media like YUDEN, Verbatim "advanced azo or datalife plus" or Hitachi Maxell (made in japan). I've used hundreds and hundreds (thousand) of these top notch media and I've never had any issues during playback or while I'm burning.
Below is a successful burned log taken from mine, you can compare yours to mine and see if you'll notice any differences. There are some in there (between yours and mine) that you can easily tell.
Quote:
====== *** Nero Burning ROM, History File *** ======
David X
Home
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX <======= (SERIAL EDITED)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 520MB (533136kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.2.2006
UDF/ISO compilation
1:48:43 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
1:48:44 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
1:48:44 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:48:44 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
1:48:44 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
1:48:44 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
1:48:44 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-710A running
1:48:44 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:48:44 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:48:44 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
1:48:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2278959 (506:26.09, 4451MB)
1:48:44 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
1:48:44 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
1:48:44 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:48:44 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2278960 (2278960) = #2278960/506:26.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278960 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
1:48:44 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4667310080, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2278960 | lead-out | 1 | 0x41 | 0x00
1:48:44 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:48:44 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
1:48:44 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
1:48:44 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
1:48:44 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
1:48:44 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:48:44 PM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
1:48:44 PM #24 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
1:48:44 PM #25 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
1:48:44 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
2:03:08 PM #27 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2278960 (22C630h), length 0 blocks
2:03:08 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:03:32 PM #29 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
2:03:32 PM #30 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
