|
|
|
Nero error - illegal disc
|
|
|
andyp95
Junior Member
|
29. March 2006 @ 04:40 |
Link to this message
|
HI max, blinkie
I did a search on the net, and read acrosee someone with the same error, and they suggest installing ForceASPI 1.7...phew luckily it works with Ridata 4x DVD+R. However, when I tried it w/Taiyo Yuen same problem occurs again, it keeps asking me to insert the disc, which I did..but the drive says it's empty. When I try it w/Ridata media, it works again. Not only Nero, but CLoneDVD,Tmpgenc. This is weird : ( because I can burn w/Taiyo Yuen before. I have lots of Taiyo Yuen media left, and only 2 more blank Ridata..
To make the long story short, right now, my burner only recognize Ridata Rx DVD+R media. Or is there a possibility that it only recognize dvd+r media and not dvd-r or dvd+rw?
I updated it to the latest VSOM one from codeguys page, but it doesn't help.
Any suggestions ? Which firmware should I download?
BTw, I tried that page to dl VSOM but it says it only work for Liteon SOHW 832s, I don't understand why either because that's the burner model I'm using. However, I'm still able to download and install the firmwares on http://codeguys.rpc1.org/firmwares.html though.
Thank you so much, I really appreciated it.
This message has been edited since posting. Last time this message was edited on 29. March 2006 @ 10:35
|
|
Advertisement
|
|
|
|
|
andyp95
Junior Member
|
29. March 2006 @ 05:45 |
Link to this message
|
|
Binkie wrote:
"On of your rom's is not in DMA - Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off see Gwen's post above for a link if needed. "
Hi Blinke, I followed Gwen's post , however I still couldn't find where my Generic DVD-Rom is located. From teh NeroInfo Tool, it's under D347 SSI COntroller, but I couldn't find it under Device Manager. I could see D347 SSI COntroller, but nothing under it . However, both my primaray & secondary are already in the DMA if available mode.
thanks
This message has been edited since posting. Last time this message was edited on 29. March 2006 @ 05:55
|
Moderator
|
29. March 2006 @ 10:57 |
Link to this message
|
@andyp95
Glad to hear at least some discs are working! Now for those Taiyo's - hmmm - I burn them on this same drive w/ the VSOM firmware and previous firmware versions so post another Nero log - just the one for the Taiyo burn failure. They are separated by this:
====== *** Nero Burning ROM, History File *** ======
Are you still using Nero 7? If so the log will be at: program files>Nero>Nero 7>Core>nerohistory.txt.
For the DMA on the rom if they are now showing in this mode that may be taken care of - the log will show if it is.
Also what type of dvd burn are you doing? Movie backup etc.
|
|
andyp95
Junior Member
|
29. March 2006 @ 11:42 |
Link to this message
|
Hi Binkie,
I'm posting you this log, I'm not sure if it's right.
Anyway, now, when I insert a Taiyo Yuen 4x DVD-R in the drive, it auto eject the drive and tell me to insert a disc,...which I did..but then it keeps scanning and says that the drive is empty even though there's a disc inside. (I tried another Taiyo disc, same thing occurs)
Oh, almost forget, I'm buring image .ISO movies files which I've always been doing w/Nero.
History log:
-------------------------------------------------------------
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 266MB (272584kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
8:04:01 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
8:04:01 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
8:04:01 AM #3 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
8:06:33 AM #4 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user
8:06:33 AM #5 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
8:06:33 AM #6 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S
Medium not present
8:06:33 AM #7 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 260MB (266704kB)
Memory in use : 49
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
8:14:48 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
8:14:48 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
8:14:48 AM #3 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
8:17:00 AM #4 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user
8:17:00 AM #5 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
8:17:00 AM #6 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S
Medium not present
8:17:00 AM #7 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 270MB (276876kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
8:41:45 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
8:41:45 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
8:41:45 AM #3 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
8:45:53 AM #4 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user
8:45:53 AM #5 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
8:45:53 AM #6 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S
Medium not present
8:45:53 AM #7 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 200MB (205136kB)
Memory in use : 60
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
8:46:45 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
8:46:45 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
8:46:45 AM #3 Text 0 File Writer.cpp, Line 113
Writer D: LITE-ON DVDRW SOHW-832S running
8:46:45 AM #4 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
8:46:49 AM #5 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286001 (508:00.01, 4464MB)
8:46:49 AM #6 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
8:46:50 AM #7 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
8:46:50 AM #8 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
8:46:50 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286002 (2286002) = #2286002/508:0.2
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286002 blocks [D: LITE-ON DVDRW SOHW-832S]
--------------------------------------------------------------
8:46:50 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681732096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286002 | lead-out | 1 | 0x41 | 0x00
8:46:50 AM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:46:50 AM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:46:50 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
8:46:50 AM #14 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
8:46:50 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
8:46:50 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
8:46:50 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:46:50 AM #18 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E0DF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
8:46:50 AM #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
8:46:53 AM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 290
D: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
Buffer x040a0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8:46:53 AM #21 CDR -1046 File Writer.cpp, Line 302
Illegal disc
D: LITE-ON DVDRW SOHW-832S
8:46:53 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:46:53 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:46:53 AM #24 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 271MB (278264kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
8:48:29 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
8:48:29 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
8:48:29 AM #3 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
8:48:37 AM #4 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user
8:48:37 AM #5 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
8:48:37 AM #6 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S
Medium not present
8:48:37 AM #7 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 105MB (108416kB)
Memory in use : 79
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
9:09:58 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
9:09:58 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
9:09:58 AM #3 Text 0 File Writer.cpp, Line 113
Writer D: LITE-ON DVDRW SOHW-832S running
9:09:58 AM #4 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
9:11:21 AM #5 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286001 (508:00.01, 4464MB)
9:11:21 AM #6 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
9:11:21 AM #7 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 1
9:11:21 AM #8 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
9:11:21 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286002 (2286002) = #2286002/508:0.2
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286002 blocks [D: LITE-ON DVDRW SOHW-832S]
--------------------------------------------------------------
9:11:21 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681732096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286002 | lead-out | 1 | 0x41 | 0x00
9:11:21 AM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:11:21 AM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:11:21 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
9:11:21 AM #14 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
9:11:21 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
9:11:21 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)
9:11:21 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:11:21 AM #18 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R01
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 52 30 31 02 38 ...RICOHJPNR01.8
23 54 37 09 00 3C 67 00 - AC 62 16 18 0B 0B 0A 0B #T7..<g..b......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
9:11:21 AM #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
9:20:25 AM #20 Text 0 File WriterStatus.cpp, Line 116
<D: LITE-ON DVDRW SOHW-832S> start writing Lead-Out at LBA 2286002 (22E1B2h), length 0 blocks
9:20:25 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:20:52 AM #22 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 328MB (336692kB)
Memory in use : 35
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
9:25:29 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
9:25:29 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
9:25:29 AM #3 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
9:25:37 AM #4 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user
9:25:37 AM #5 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
9:25:38 AM #6 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S
9:25:38 AM #7 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: VS0M - HA 1 TA 4 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom4
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 251MB (257544kB)
Memory in use : 50
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
11:40:32 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
11:40:32 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
11:40:32 AM #3 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
11:43:00 AM #4 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user
11:43:00 AM #5 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
11:43:00 AM #6 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S
Medium not present
11:43:00 AM #7 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: VS0M - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 265MB (272080kB)
Memory in use : 48
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
11:58:08 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
11:58:08 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
11:58:08 AM #3 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
11:59:26 AM #4 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user
11:59:26 AM #5 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
11:59:26 AM #6 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S
Medium not present
11:59:26 AM #7 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: VS0M - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 268MB (274584kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
3:18:07 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
3:18:07 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
3:18:07 PM #3 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
3:19:56 PM #4 Phase 40 File dlgbrnst.cpp, Line 1730
Aborted by user
3:19:56 PM #5 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
3:19:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S
Medium not present
3:19:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
|
|
andyp95
Junior Member
|
29. March 2006 @ 11:51 |
Link to this message
|
It recognize Ridata 4x DVD+R disc, but now RW..w/RW it says illegal disc. W/Taiyo Yuen 4x DVD-R, it keeps checking for the disc and tell to insert disc, which I did :( weird.
BTW here's a log for a Ridata 4x DVD+RW disc:
--------------------------------------------------------
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.5
Internal Version: 7, 0, 5, 5
Recorder: <LITE-ON DVDRW SOHW-832S> Version: VS0M - HA 1 TA 1 - 7.0.5.5
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S D: CDRom1
PIONEER DVD-ROM DVD-117R G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 182MB (187116kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2006
Burn DVD Image
4:46:22 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
4:46:22 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
4:46:22 PM #3 Text 0 File Writer.cpp, Line 113
Writer D: LITE-ON DVDRW SOHW-832S running
4:46:22 PM #4 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
4:46:26 PM #5 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285751 (507:56.51, 4464MB)
4:46:26 PM #6 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
4:46:26 PM #7 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
4:46:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
4:46:26 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 2285752 (2285752) = #2285752/507:56.52
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285752 blocks [D: LITE-ON DVDRW SOHW-832S]
--------------------------------------------------------------
4:46:26 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681220096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285752 | lead-out | 1 | 0x41 | 0x00
4:46:26 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:46:26 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:46:27 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
4:46:27 PM #14 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
4:46:27 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
4:46:27 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
4:46:27 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
4:46:27 PM #18 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E0DF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
4:46:27 PM #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
4:46:29 PM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 290
D: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
Buffer x056c0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4:46:29 PM #21 CDR -1046 File Writer.cpp, Line 302
Illegal disc
D: LITE-ON DVDRW SOHW-832S
4:46:29 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:46:29 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:46:30 PM #24 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/29/2006 3:49:08 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
29. March 2006 @ 12:24 |
Link to this message
|
@andyp95
Which VSOM firmware did you use from the code guys? The modified VSOM or the stock VSOM?
Oh and the latest Nero version is 7.0.8.2 - you can update that by going to Nero product center in smart start and downloading. Updating it may not solve this problem though but I would update.
|
Senior Member
|
29. March 2006 @ 18:05 |
Link to this message
|
@andyp95
Did you do anything with ASPI? From this Quote:
I did a search on the net, and read acrosee someone with the same error, and they suggest installing ForceASPI 1.7...phew luckily it works with Ridata 4x DVD+R.
I cant tell if you used force aspi, or just read about it.
Check the status of your system aspi with Nero info tools.
You should see something like this on your info tool:
Also here is what AD says about ASPI layers and how to install them:
http://www.afterdawn.com/guides/archive/aspisetup.cfm
One of the things in force aspi is called killaspi, and that removes the old or corrupted aspi.
http://www.afterdawn.com/software/cdr_software/cdr_tools/frcaspi.cfm
If Nero reports your system aspi as good, then im just about out of ideas as to what else it can be.
Die CMC Mag!!! |
|
andyp95
Junior Member
|
30. March 2006 @ 07:39 |
Link to this message
|
HI Max,
I used force ASPI , because I did a check in Nero, and the SYstem ASPI isn't green before. Now both are green.
Blinkie,
I used the patched one, it didnt solove the problem so I switch to stock for now.
|
Moderator
|
30. March 2006 @ 09:12 |
Link to this message
|
|
@andyp95
Well I'm at at loss now - maybe the drive is going? Maybe bad flash with the original patched firmware? Don't know but for now it only seems to like the ridata. Since it has this problem w/ all other burning progs too you may just want to pick up a new one - they're alot cheaper now (I remember paying $150 or something like that for this drive when it 1st came out.)
|
|
andyp95
Junior Member
|
31. March 2006 @ 04:01 |
Link to this message
|
|
binkie,
Yes I guess so. I'm looking for an external drive this time, because I' don't know how to install an internal one myself. Hope it's still good.
Again, Thanks for your time
|
Moderator
|
31. March 2006 @ 05:33 |
Link to this message
|
|
@andyp95
Just my 2 cents :) but go with a internal - cheaper and believe me they are way too easy too install. If I can do it anyone can!
If you need help w/ it there's always someone here to help!!
This message has been edited since posting. Last time this message was edited on 31. March 2006 @ 05:33
|
|
andyp95
Junior Member
|
31. March 2006 @ 05:57 |
Link to this message
|
|
Binkie,
Do you have any suggestions which brand,model I should get this time?
Last time, somebody installed the internal Liteon for me, it looks too tough for me to install w/all the openning and stuffs. But I'll do a search and see.
Thanks
|
Moderator
|
31. March 2006 @ 06:46 |
Link to this message
|
@andyp95
For brand I would say Plextor - that's the king of burner's (imho). Members here and my firends love this burner. Now for model I haven't looked into the different ones yet - I'm waited for the dual layer burn speed to go a little higher than 8x then I plan on getting a Plextor unless one of my drives goes sooner.
The cost of an internal vs external is almost half - installation easy. The drive should come with everything you need & the instructions are very easy to follow. It's really not that bad!!
To show how easy it is here's a link - look at # 7 & 8. In #8 thiere's also a link to show how to configure.
http://home.comcast.net/~bbmayo/FAQ.htm
|
|
andyp95
Junior Member
|
31. March 2006 @ 15:48 |
Link to this message
|
|
Thanks Binkie.
I just ordered Plexter's PX-740UF external drive, it's on sale now..and I wasn't sure if I can install an internal one myself and this one is a pretty good deal.
|
|
andyp95
Junior Member
|
31. March 2006 @ 16:04 |
Link to this message
|
|
Hi Binike,
OMg, just realized that the Min processor requirement is 1.6 GHz, mine is only 1.5 GHz...My fault, should've looked before I order, totally forgot about that. Do you think 1.5 Ghz is still ok? Or do I really have to upgrade it to 1.6? Don't know how to do that yet, but I'll check.
BTw, have a nice weekend!
|
Moderator
|
31. March 2006 @ 17:31 |
Link to this message
|
|
Well you'd have to upgrade your cpu. Can you system support that?
Me - I would stick with getting a burner that met or was under my system specs. I ran an internal a while back(or tried I should say) that didn't meet the cpu requirements but just meet the ram - too many problems.
Have a good weekend too!
|
|
andyp95
Junior Member
|
7. April 2006 @ 12:18 |
Link to this message
|
|
Hi Blinke,
I cancelled that drive since it also requires usb 2.0, and I don't have that.
I just place an order for Benq 1655 internal burner, internal burner are usually work w/most computers right? Or there's anything that I need to watch for? My computer is around 6 yrs old now.
What I'm worrying about is that I'm afraid it's not my burner but pc errors therfore even if I bought a new burner I wouldn't able to burn.
This is because I've been testing w/the burner. It sometimes recognizes all dvdr media, and also burn successfully but when I put it in the dvd player it said" No Disc" or "Disc Error". Some of the times, it wouldn't burn anything at all.
This message has been edited since posting. Last time this message was edited on 7. April 2006 @ 12:23
|
Moderator
|
7. April 2006 @ 15:32 |
Link to this message
|
|
Hi andyp95
Yes internal burners will work w/ pc's - just make sure you meet the minimum requirements. Make sure you have it on separate power supply.
I'm thinking your current one on it's way out.
When you get the new one 1st thing make sure the firmware is current - it may be new but the firmware has probably been updated.
Few other things to do (very doubtful will help current burning sitation -but good to do)- run a virus scan, do a disc cleanup and a system defrag.
Let us know how turns it!!
This message has been edited since posting. Last time this message was edited on 7. April 2006 @ 15:33
|
|
andyp95
Junior Member
|
7. April 2006 @ 17:58 |
Link to this message
|
|
Thanks for the tip Binkie.
I did everything you mentioned..it didn't help though.
I'll let u know how it turns out after I install my burner (hopefully I do it right , sighhh **)
"Make sure you have it on separate power supply." by this, do you mean separate power for the internal drive itself? Sorry, I've never install a burner before, so I'm nout sure if that's what you're talking about. So there's a power supply along w/the cables itself?
Should I order the cables for installation too?
Some silly questions, but here's the requirements:
IBM PC compatible
Pentium III 550MHz CPU
128MB DRAM, ettc...
Does IBM PC compatible meant any pc is ok? Or does it has to be made my IBM? I'm using a Sony one. And my is 512 MB SdRAM, is it larger than 128mb DRam?
This message has been edited since posting. Last time this message was edited on 7. April 2006 @ 19:01
|
Senior Member
|
7. April 2006 @ 21:46 |
Link to this message
|
|
Hi andyp95,
Ill try to answer some of those questions for you.
Once you install a new burner, i think you will realize how easy it is. For most new tower cases, there are only two thumb screws holding on one side plate. Once that is removed, the drives are exposed. Most have 2 cables connecting the drive, and 2 phillips head screws holding the drive itself in. The seperate power supply warning means use a power line from the power supply for that drive only. Dont connect it to one that is also powering something else. The drive should be configured that way already, but if not, most cases have extra power leads dangling there, or tied back to the case, but not being used.
Since you are replacing a drive, you will probably re-use the existing cables, no need to order any extra parts.
IBM PC compatible, doesnt have to be made by IBM (i think they got out of the PC business a year or so ago).
Going with the internal drive is the way to go. You dont have extra stuff hanging out of the computer. The hardest part for you might be setting the drive to master, or cable select, but it will have pictures, and is probably already set correctly.
Your 512mb is ok, but you might want to upgrade to 1GB in the future. When you get the case off, get rid of any dust, and check the fans for dust while you are at it. Just read the instructions that come with the drive, and you should have no problems. I swapped my last drive out in 10 minutes, but i took time to clean the inside of the case, thats why it took so long.
Good luck. Sometimes these drives just die, and replacing them is the only way to fix it.
Die CMC Mag!!!
|
|
andyp95
Junior Member
|
8. April 2006 @ 07:40 |
Link to this message
|
|
Thanks for the reply Max.
I've never installed an internal drive myself, so I'm kinda worry. But since everyone saying it's not that complicated, then I guess I'll be okay. I'll let you guys know how it turn out. Hope it's all good, so I don't have to bother you guys one more time hihi
|
Moderator
|
8. April 2006 @ 08:00 |
Link to this message
|
|
@andyp95
You're definitely not bothering us!! I think you'll be fine installing it - maxburn also pointed out the master/slave bit - this will all be in the drive's manual. Not to worry!
In the mean time til the BenQ comes - have your tried uninstalling the Liteon in device manager then rebooting and letting windows install?
May not help but may be worth a shot.
|
|
andyp95
Junior Member
|
8. April 2006 @ 08:33 |
Link to this message
|
|
Hi Binkie,
Yes, I've tried that also. Same result though, it didn't help.
Oh how do I know which is the lastest firmware version available though? I'm ordering a Benq Dw1655 retail box instead of the OEM because I think I'll need the manual guide.
Thanks again, have a nice weekend everyone.
|
Moderator
|
8. April 2006 @ 10:42 |
Link to this message
|
Once you get the drive installed check Nero Info Tool for the firmware version - under drive tab there's a field that will display the current firmware #.
The latest for this drive is BCDB from 1/24/06 so if your drive was made before this you should update it.
Here's a link:
http://www.benq-eu.com/ServiceAndSupport/downloads/downloads.cfm?...
Have a good weekend too!
|
|
Advertisement
|
|
|
|
BoxOfEyes
Newbie
|
8. April 2006 @ 12:47 |
Link to this message
|
Hey folks,
I too just started getting an illegal disc error from Nero (and from DVD Shrink). In fact, I just completed burning a dvd disc and went to burn it again to another disc and got the illegal disc error. Since then, every attempt results in this error. I've tried all burning speeds available, with the same result. I've used this same brand of dvds for a year to a year and a half. The disc that worked came out of the same spindle.
Any help here would be greatly appreciated! THANK YOU!!!
Here is my latest log...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6500A> Version: 202C - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 202C - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHU2100AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 199MB (204476kB)
Memory in use : 60
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.4.2006
UDF/ISO compilation
10:50:19 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
10:50:19 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
10:50:19 PM #3 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:50:19 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
10:50:19 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
10:50:19 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
10:50:19 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
10:50:19 PM #8 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
10:50:19 PM #9 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1594527 (354:20.27, 3114MB)
10:50:19 PM #10 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:50:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
10:50:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:50:19 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1594528 (1594528) = #1594528/354:20.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1594528 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
10:50:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3265593344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1594528 | lead-out | 1 | 0x41 | 0x00
10:50:19 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:50:19 PM #16 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
10:50:19 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:50:19 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
10:50:19 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:50:19 PM #20 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
10:50:19 PM #21 Text 0 File Mmc.cpp, Line 21469
Set BUFE: JustLink -> ON
10:50:19 PM #22 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
10:50:19 PM #23 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:50:19 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x54 0xA0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
10:50:19 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765
Illegal disc
10:50:19 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765
Could not perform start of Disc-at-once
10:50:19 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.47 , size=24960 bytes, created 3/8/2005 10:08:42 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
