|
|
|
Nero error - illegal disc
|
|
Moderator
|
8. April 2006 @ 13:17 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 8. April 2006 @ 13:18
|
|
Advertisement
|
|
|
|
Moderator
|
8. April 2006 @ 13:52 |
Link to this message
|
@BoxOfEyes -
binkie7 beat me to it, bless her; i must be getting slow :)
Quote:
Nero Version: 6.6.0.13
- not too bad, latest 6.x version is 6.6.0.18 (a lot of us don't count 6.6.1.4 as that's crap and buggy)
Quote:
Recorder: <_NEC DVD+-RW ND-6500A> Version: 202C
- i'm assuming your PC is a Dell and the burner came with it, if so your firmware is a little out of date, 203D is here - http://tdb.rpc1.org/#ND6500A
If it's not a Dell PC then see the other choices at that link..
Quote:
Physical memory : 511MB (523496kB)
Free physical memory: 199MB (204476kB)
Memory in use : 60
- sufficient total memory but freee memory leaves much to be desired. you need to ensure sufficient free memory prior to ALL burning
Quote:
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
- firmware is recognising those discs ok so firmware update can maybe keep for another time
Quote:
Illegal disc
- see all other comments
Quote:
Burn process failed at 2x (2,770 KB/s)
- too slow, try 4x or even 8x
Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.47 , size=24960 bytes, created 3/8/2005 10:08:42 PM
- CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Moderator
|
8. April 2006 @ 14:14 |
Link to this message
|
|
@creaky
Nah your not getting slow!! Always good to have a 2nd set of eyes look thru the logs imho.
|
|
corleno
Newbie
|
9. April 2006 @ 05:09 |
Link to this message
|
hy
im having an issue with my nero
I wasred like 40 DVDs because of this error while burning DATA dvds :((
plz help
my detailed log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.26 (Nero Express)
Recorder: <HP DVD Writer 635d> Version: JPS3 - HA 3 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HP DVD Writer 635d >Version: JPS3 - HA 3 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : ST3120213A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 635d atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CDRW/DVD SM-352N atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 635d K: CDRom0
SAMSUNG CDRW/DVD SM-352N L: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 431MB (442128kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.4.2006
ISO compilation
6:24:49 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:24:49 PM #2 Text 0 File Reader.cpp, Line 126
Reader running
6:24:49 PM #3 Text 0 File Writer.cpp, Line 124
Writer HP DVD Writer 635d running
6:24:49 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:24:49 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
6:24:50 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1542655 (342:48.55, 3012MB)
6:24:50 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
6:24:50 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HP DVD Writer 635d, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
6:24:50 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:24:50 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1542656 (1542656) = #1542656/342:48.56
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1542656 blocks [HP DVD Writer 635d ]
--------------------------------------------------------------
6:24:50 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HP DVD Writer 635d ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3159359488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1542656 | lead-out | 1 | 0x00 | 0x41
6:24:50 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
6:24:50 PM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
6:24:50 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
6:24:50 PM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)
6:24:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:24:51 PM #17 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 4:53,438 (293438ms) -> OK
6:24:51 PM #18 Text 0 File DVDR.cpp, Line 2011
Recording mode: Sequential Recording Mode
6:24:51 PM #19 Text 0 File Mmc.cpp, Line 20794
Set BUFE: supported -> ON , Generic write control : ON
6:24:51 PM #20 Text 0 File DVDR.cpp, Line 2152
Start write address at LBA 0
DVD high compatibility mode: Yes
6:24:51 PM #21 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:26:01 PM #22 Text 0 File Cdrdrv.cpp, Line 1297
18:26:01.515 - HP DVD Writer 635d\H3 T0 : Queue again later
6:33:37 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0ADC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x10 0x5E 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
6:33:37 PM #24 CDR -1135 File Writer.cpp, Line 304
Write error
6:33:37 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:33:37 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
6:33:38 PM #27 Text 0 File DVDR.cpp, Line 2394
EndDAO: Last written address was 1072639
6:33:38 PM #28 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
6:33:38 PM #29 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
6:33:38 PM #30 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 9:49:28 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2149 (xpsp_sp2_rc2.040610-1520), size=95360 bytes, created 6/10/2004 4:18:12 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
9. April 2006 @ 10:27 |
Link to this message
|
@corleno
Welcome to aD!
Quote:
Recorder: <HP DVD Writer 635d> Version: JPS3
You may need a firmware up date but I'm having a heck of a time finding your drive. The oem may be Liteon. From what I could find looks like this drive should have come with software that you need to install to check for firmware updates. Maybe Creaky or Maxburn can find one.
Quote:
Disc Manufacturer: FUJIFI - LM03
Okay media at best. Try some Verbatim or made in Japan only Fuji, Sony or Maxell.
Quote:
Burn process failed at 8x
Take it down a notch or 2 to 4x.
A Nero update can hurt - see above posts for a decent version of 6.
|
Moderator
|
9. April 2006 @ 10:31 |
Link to this message
|
|
hi, it would seem to be an OEM of the Lite-on SOHW-1673S however i can't find much on firmware details either...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
corleno
Newbie
|
10. April 2006 @ 03:09 |
Link to this message
|
|
hy thank u guys for
your prompt replies
Im having a HP dvd635d
and i hav J3 i think the latest is J(somethin) 5
thing is ,i lost the HP writer CD :(
and i am unable to update the software,iv tried Google and everything
if some1 can give me the
data on the HP cd it would be great
i think a firmware upgrade will work , but
iv no hp cd
thank you again,
corleno
|
Moderator
|
10. April 2006 @ 06:38 |
Link to this message
|
|
|
andyp95
Junior Member
|
13. April 2006 @ 13:04 |
Link to this message
|
|
Binkie, Max
I've successfully installed my dvd burner. Thank you so much for all the help within the last 2 weeks. It's not as complicated as I thought it would be. Luckily, it came w/the latest firmware so I don't have to do any updates. THANK YOU!! You guys are the greatest. From now on I don't have to worry about replacing burner again.
|
Moderator
|
13. April 2006 @ 15:52 |
Link to this message
|
|
@andyp95
Glad to hear you were successful!!! See if I can do it anyone can!
Hopefully your burn problems have been solved!
|
|
andyp95
Junior Member
|
13. April 2006 @ 18:35 |
Link to this message
|
|
Binkie,
Yes it's burning very smoothly now. The new benq burner is actually very nice, quiet.
|
|
corleno
Newbie
|
18. April 2006 @ 06:54 |
Link to this message
|
hy guys im back again
iv changed the DVDs i use to burn and bought the 1s i used to burn
with and looks like Im having the same end disk at once error again :(
it used to work like a charm before
this problem only started recently :(
can something be done ? thank U
my log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <HP DVD Writer 635d> Version: JPS3 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HP DVD Writer 635d >Version: JPS3 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120213A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 635d atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CDRW/DVD SM-352N atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 635d K: CDRom0
SAMSUNG CDRW/DVD SM-352N L: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 147MB (151488kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.4.2006
ISO compilation
7:48:15 PM #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:48:15 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
7:48:15 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
7:48:15 PM #4 Text 0 File Writer.cpp, Line 113
Writer K: HP DVD Writer 635d running
7:48:15 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:48:15 PM #6 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
7:48:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1964623 (436:34.73, 3837MB)
7:48:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
7:48:16 PM #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HP DVD Writer 635d, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
7:48:16 PM #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:48:16 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1964624 (1964624) = #1964624/436:34.74
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1964624 blocks [K: HP DVD Writer 635d]
--------------------------------------------------------------
7:48:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [K: HP DVD Writer 635d] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4023549952, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1964624 | lead-out | 1 | 0x41 | 0x00
7:48:16 PM #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:48:16 PM #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
7:48:16 PM #15 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
7:48:16 PM #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
7:48:16 PM #17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 8x (11,080 KB/s)
7:48:16 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:48:16 PM #19 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession
7:48:16 PM #20 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
7:48:16 PM #21 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
7:48:16 PM #22 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:50:36 PM #23 SPTI -1114 File SCSIPassThrough.cpp, Line 323
K: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x03890000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7:50:36 PM #24 CDR -1114 File Writer.cpp, Line 302
Reset occurred
K: HP DVD Writer 635d
7:50:36 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:50:36 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:50:37 PM #27 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 31
7:50:37 PM #28 SPTI -1080 File SCSIPassThrough.cpp, Line 323
K: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x033b8400: Len x20
7:50:37 PM #29 CDR -1080 File WriterStatus.cpp, Line 167
Disc not present
K: HP DVD Writer 635d
7:50:37 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
7:50:37 PM #31 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
18. April 2006 @ 08:44 |
Link to this message
|
@corleno -
Quote:
Nero Version: 7.0.1.4
- update to 7.0.8.2 from here - http://www.nero.com/nero7/eng/nero7-up.php
Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
a-ha, Nero's too old to recognise your burner, you need to update to 7.0.8.2
Quote:
Physical memory : 1022MB (1047276kB)
Free physical memory: 147MB (151488kB)
Memory in use : 85 %
- sufficient total memory but free memory leaves much to be desired. you need to ensure sufficient free memory prior to ALL burning
Quote:
Disc not present
- hmmm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 18. April 2006 @ 08:44
|
|
corleno
Newbie
|
18. April 2006 @ 10:57 |
Link to this message
|
thank you for your prompt reply
i am updating Nero now
sorry for being a Pain
regards,
corleno
|
Moderator
|
18. April 2006 @ 11:02 |
Link to this message
|
|
no probs, that's what we're here for :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
corleno
Newbie
|
18. April 2006 @ 12:30 |
Link to this message
|
hi again
I installed the new version of Nero .8
and i get this log :(
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <HP DVD Writer 635d> Version: JPS3 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HP DVD Writer 635d >Version: JPS3 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120213A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 635d atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CDRW/DVD SM-352N atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 635d G: CDRom0
SAMSUNG CDRW/DVD SM-352N H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 364MB (372908kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.4.2006
ISO compilation
1:43:15 AM #1 Text 0 File Isodoc.cpp, Line 6423
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:43:15 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
1:43:15 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
1:43:15 AM #4 Text 0 File Writer.cpp, Line 113
Writer G: HP DVD Writer 635d running
1:43:15 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:43:15 AM #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
1:43:15 AM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2143807 (476:24.07, 4187MB)
1:43:15 AM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
1:43:15 AM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HP DVD Writer 635d, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
1:43:15 AM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:43:15 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2143808 (2143808) = #2143808/476:24.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143808 blocks [G: HP DVD Writer 635d]
--------------------------------------------------------------
1:43:15 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: HP DVD Writer 635d] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4390518784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2143808 | lead-out | 1 | 0x41 | 0x00
1:43:15 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:43:15 AM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
1:43:15 AM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
1:43:15 AM #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
1:43:15 AM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
1:43:15 AM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)
1:43:15 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:43:15 AM #20 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode for Multisession
1:43:16 AM #21 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
1:43:16 AM #22 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:54:37 AM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 290
G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 18 ED 40 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x053c0000: Len x10000
0xC9 55 2B 2B C5 70 67 FC 2F 03 0A 5A AA 7D 77 81
0x32 B9 FB EB 59 53 E0 54 70 08 8B BF 19 34 23 C3
0x20 0A 70 65 8D 4E 98 57 AE FB 84 A0 4E 11 7D 32
1:54:37 AM #24 CDR -1135 File Writer.cpp, Line 302
Write error
G: HP DVD Writer 635d
1:54:37 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:54:37 AM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:54:37 AM #27 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 1633599
1:54:37 AM #28 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out
1:55:27 AM #29 SPTI -1194 File SCSIPassThrough.cpp, Line 290
G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 04
1:55:27 AM #30 SPTI -1169 File SCSIPassThrough.cpp, Line 290
G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x52 01 00 00 00 02 00 00 24 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x0348ca00: Len x24
1:55:27 AM #31 SPTI -1169 File SCSIPassThrough.cpp, Line 290
G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
1:55:37 AM #32 CDR -1194 File WriterStatus.cpp, Line 167
PMA update failure
G: HP DVD Writer 635d
1:55:37 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
1:55:37 AM #34 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thanks in advance :)
|
Moderator
|
18. April 2006 @ 13:47 |
Link to this message
|
Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
- your burner is still not supported in the very latest verson of Nero there...burner must be newer than the latest Nero update then so burner is only supported generically. maybe someone else can help out here and advise an alternative burning program...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Moderator
|
18. April 2006 @ 17:24 |
Link to this message
|
@corleno
Your using better media TY - that's a good thing.
Quote:
Multisession type: : Start multisession
Since it's -r turn this option off.
Another thing I've noticed is your drivers have gone from this
Quote:
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 9:49:28 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2149 (xpsp_sp2_rc2.040610-1520), size=95360 bytes, created 6/10/2004 4:18:12 PM (Adapter driver for rec)
To this
Quote:
Existing drivers:
This may be part of the problem. I would try uninstalling the drive in device manager rebooting and letting windows reinstall.
Creaky would be the better one to help with this.
For burning an iso give DVD Decrypter or imgburn a try.
|
|
BoxOfEyes
Newbie
|
23. April 2006 @ 19:15 |
Link to this message
|
hi all.
i tried the suggestions given by binkie7 and creeky. thanks for the help!
- updated Nero with package 1 and package 2.
- uninstalled roxio and ran roxio zapper.
- ran firmware update for 203D (i do have a dell laptop) - altho my log seems to still indicate 202C.
however, i still get the same illegal disc error message. any additional help would be greatly appreciated! thank you!!!
here was my latest log...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6500A> Version: 202C - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 202C - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHU2100AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 155MB (159484kB)
Memory in use : 69
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.4.2006
UDF/ISO compilation
11:05:14 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:05:14 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
11:05:14 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:05:14 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
11:05:14 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
11:05:14 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:05:14 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:05:14 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:05:15 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2145247 (476:43.22, 4189MB)
11:05:15 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
11:05:15 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
11:05:15 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:05:15 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2145248 (2145248) = #2145248/476:43.23
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2145248 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
11:05:16 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4393467904, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2145248 | lead-out | 1 | 0x41 | 0x00
11:05:16 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:05:16 PM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:05:16 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:05:16 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
11:05:17 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:05:17 PM #20 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
11:05:17 PM #21 Text 0 File Mmc.cpp, Line 21774
Set BUFE: JustLink -> ON
11:05:17 PM #22 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
11:05:17 PM #23 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:05:17 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x20 0xBB 0xE0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
11:05:17 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
11:05:17 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
11:05:17 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
Moderator
|
23. April 2006 @ 19:34 |
Link to this message
|
|
@BoxOfEyes
Yep your firmware update didn't take for some reason. I would try downloading it again and retrying to flash the drive. Sometimes you will get a message saying to reboot which usually means it's sucessful.
The memory could still use some freeing up.
Burning at 2.4x is still a bit slow too.
Other than that it seems your drive doesn't like the Sony discs.
You're still getting this error
SCSI_TASTATUS_CHKCOND
Try switching to Verbatim or made in Japan Fuji or Maxell.
Let us know how it turns out - good, bad or otherwise!
|
|
BoxOfEyes
Newbie
|
23. April 2006 @ 20:12 |
Link to this message
|
|
the weird thing is that i have been using sony dvds exclusively for about a year. this is the first problem i have ever had. i did a quick recount of the discs in this spindle, and i have the full amount.
i guess it is possible that i got a bad spindle. does anyone know if there is any known change to how sony makes it's blank dvds?
i suppose i will give another brand, or at least another spindle a shot.
thanks again for your reply binkie!
i will definitely let you know how it works out.
|
Moderator
|
24. April 2006 @ 07:08 |
Link to this message
|
|
@BoxOfEyes
You could have received a bad spindle or maybe some bad ones in the spindle. Though using better media usually cuts down on the errors.
I don't think there has been any change though they have been increasing the rated burn speeds on their discs.
So maybe you were using 8x or lower and now these rated 16x speeds are not liked by your burner.
That's where the firmware may help.
Keep us posted!
|
|
BoxOfEyes
Newbie
|
24. April 2006 @ 11:51 |
Link to this message
|
thanks for the reply binkie7.
just so i understand this burning speed issue...
if a dvd is rated as a 16x speed, you should not burn any slower?
when i put the dvd in the drive, Nero gives me burning speed options of 1, 2, 2.4x, and Maximum.
i (perhaps mistakenly) thought that the slower i burned a dvd, the less chance for error. i also close all other applications when burning.
|
Moderator
|
24. April 2006 @ 16:15 |
Link to this message
|
You can burn 16x media slower than 16x - for 16x quality media with a good drive that supports this speed I burn at 8x or 12x.
Now since the max burn speed on your drive is 8x for -/+ is I would try 4x.
Why Nero only list those burns when a blank is inserted before the project starts is usually due to the what the drive recognizes as the discs burn speeds. This is where a firmware update can help.
Since your's is 8x hopefully NEC has come out w/ firmware updates for 16x media. Though sometimes the updates are not very descriptive on what they're adding.
As the drives get better and faster along with the media - try the higher speeds out. For yours 4x should be okay. It really depends on what works best for you & your setup.
|
|
Advertisement
|
|
|
|
BoxOfEyes
Newbie
|
24. April 2006 @ 17:03 |
Link to this message
|
thanks for the info, binkie7. i'm learning a lot even though i still feel completely lost. lol.
so i tried running the firmware update again. then tried burning. same illegal error, and the log still indicates 202c firmware, not 203D.
maybe i am not updating the firmware correctly. i downloaded a zip file and unzipped the files:
6500FAST.BIN
6500ORIG.BIN
6500RPC1.BIN
NEC6X00A.EXE
README.TXT
i ran the .exe which flashes a DOS window so quickly i can't see what is actually happening there. i have no idea what most of the text in the README.TXT file means. here's what it says...
NEC ND-6500A 203D RPC1 and Rip Speed Firmware
Included files
README.TXT This file
NEC6X00A.EXE ND-6x00A series DOS Flasher
6500ORIG.BIN Original binary as supplied
6500FAST.BIN 6100@6500 and Rip Lock Patches
6500RPC1.BIN RPC1, 6100@6500 and Rip Lock Patches
6100@6500 allows the firmware to work on a 6100A drive if you have one.
Rip Lock removes the speed locks on single and dual layer DVD-ROM discs
with a VIDEO_TS directory.
RPC1 removes region state handling commands and checks.
--------------------------
An RPC1 firmware defeats the internal counters within the drive and
removes region enforcement. This only is HALF of the equation. You
need to use DVD Genie or similar software to control your player
software. http://forum.rpc1.org/viewtopic.php?t=239
Flashing these firmwares requires some risk on your part. If you are not
comfortable with this please do not proceed. We cannot guarantee they will
work or flash correctly in any environment out of our control.
The flash process requires Real DOS, a DOS box under Windows is not suitable.
The syntax for the flasher, assuming a Secondary Master is
nec6x00a -sec -mas -flash 6500xxxx.BIN
Make a backup of your current ROM first
nec6x00a -sec -mas -out BACKUP.BIN
any more info you can help me with would be very appreciated! is there more i should be doing to update the firmware?
this is great place for info, and it has really helped so far! hopefully, i'll be able to burn again soon!
thanks again for all the help and info!
|
|
