|
Nero 6.6 and DVD+R Closed
|
|
|
ShdwStrdr
Suspended due to non-functional email address
|
28. March 2006 @ 14:56 |
Link to this message
|
|
I was wanting to know if you can burn a DVD +R with Nero 6.6 Ultra.
I can burn all the disk I want with a DVD -R but when trying to burn with a +R I get an error message towards the end of the burning process saying that
"Burning process could not be completed" try again with compatible burning software.
Thanx
ShadowStryder
|
|
Advertisement
|
|
|
|
Moderator
|
28. March 2006 @ 15:40 |
Link to this message
|
@ShdwStrdr
As long as your burner supports both formats you should be able too.
Your best bet is to post the Nero log for this failure located at program files>ahead>nero>nero history.txt. Be sure to edit out your serial # - they usually begin with 1A or 1C.
The logs are also separated by this:
====== *** Nero-Burning Rom, History File *** ======
This post is probably better off in the Nero forum - I'll request a transfer.
|
|
ddp
Moderator
|
28. March 2006 @ 16:19 |
Link to this message
|
|
moved
|
|
ShdwStrdr
Suspended due to non-functional email address
|
28. March 2006 @ 16:31 |
Link to this message
|
From my understanding when I purchased the burner a year and a half ago it was supposeded to support both formats.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 7:25:03 AM
Nero API version: 6.0.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.10 - HA 0 TA 3 - 6.0.0.13
Adapter driver: <nvatabus> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : ASUS DVD-E616P nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-107D nvatabus Port 0 ID 3 DMA: Off
=== CDRom-Device-Map ===
ASUS DVD-E616P D: CDRom0
PIONEER DVD-RW DVR-107D E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 643MB (658876kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.3.2006
NeroAPI
3:38:59 PM #1 Phase 112 File APIProgress.cpp, Line 235
DVD-Video files reallocation started
3:38:59 PM #2 Phase 114 File APIProgress.cpp, Line 235
DVD-Video files reallocation completed (no file modified)
3:38:59 PM #3 Phase 111 File APIProgress.cpp, Line 235
DVD-Video files sorted
3:38:59 PM #4 Text 0 File Reader.cpp, Line 118
Reader running
3:38:59 PM #5 Text 0 File Writer.cpp, Line 127
Writer PIONEER DVD-RW DVR-107D running
3:38:59 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)
3:38:59 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)
3:38:59 PM #8 Text 0 File Burncd.cpp, Line 3176
Turn on Disc-At-Once, using DVD media
3:38:59 PM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2283999 (507:33.24)
3:38:59 PM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE
3:39:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: PIONEER DVD-RW DVR-107D, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
3:39:01 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2284000 (2284000) = #2284000/507:33.25
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2284000 blocks [PIONEER DVD-RW DVR-107D]
--------------------------------------------------------------
3:39:01 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [PIONEER DVD-RW DVR-107D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4677939200, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2284000 | lead-out | 1 | 0x00 | 0x41
3:39:01 PM #14 Phase 24 File APIProgress.cpp, Line 235
Caching of files started
3:39:01 PM #15 Phase 25 File APIProgress.cpp, Line 235
Caching of files completed
3:39:01 PM #16 Phase 36 File APIProgress.cpp, Line 235
Burn process started at 2x (2,760 KB/s)
3:39:01 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:39:01 PM #18 Text 0 File DVDR.cpp, Line 1497
Recording mode: Sequential Recording Mode
3:39:01 PM #19 Text 0 File Mmc.cpp, Line 18973
Set BUFE: supported -> ON
3:39:01 PM #20 Text 0 File DVDR.cpp, Line 1612
Start write address at LBA 0
DVD high compatibility mode: Yes
3:39:01 PM #21 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:39:03 PM #22 Text 0 File Writer.cpp, Line 318
15:39:03.437 - PIONEER DVD-RW DVR-107D : Queue again later (Intervall : 23msec)
3:39:59 PM #23 Text 0 File Writer.cpp, Line 318
15:39:59.468 - PIONEER DVD-RW DVR-107D : Queue again later (Intervall : 23msec)
4:08:06 PM #24 Text 0 File WriterStatus.cpp, Line 113
<PIONEER DVD-RW DVR-107D> start writing Lead-Out at LBA 2284000 (22D9E0h), lenght 0 blocks
4:08:06 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:08:54 PM #26 Phase 37 File APIProgress.cpp, Line 235
Burn process completed successfully at 2x (2,760 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[12.03.2006]------------------------------------
15:38:59 Robot error messages from:I could not find the S# anywhere in the logs but here is the logs as follows:
ShadowStryder
|
Moderator
|
28. March 2006 @ 16:55 |
Link to this message
|
@ShdwStrdr
Your drive does suport both formats - so okay there. Now this log is a succesful burn on Ritek -RW media from 3/12/06. But I see some things that may help the +r problem.
Quote:
Nero API version: 6.0.0.13
Update Nero to version 6.6.0.18 - here's a link:
http://forum.rpc1.org/dl_firmware.php?download_id=1754Quote:
DiskPeripheral : WDC WD1600JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : ASUS DVD-E616P nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-107D nvatabus Port 0 ID 3 DMA: Off
Turn these back on - here's a guide if needed but since you have nvatabus drivers this may not work - (they can be a pain to turn dma back on):
http://forums.afterdawn.com/thread_view.cfm/260038Quote:
PIONEER DVD-RW DVR-107D>Version: 1.10
Firmware could use an update - it's a bit behind - the latest is 1.22
Here's a link to update that:
http://forum.rpc1.org/dl_firmware.php?download_id=1754
Try these than try the +r again - this may sort it out.
This message has been edited since posting. Last time this message was edited on 28. March 2006 @ 16:56
|
|
ShdwStrdr
Suspended due to non-functional email address
|
28. March 2006 @ 17:03 |
Link to this message
|
|
Blinkie7
Sorry about grabbing the wrong log. but I will try the suggestions and get back.
Thanks
ShadowStryder
|
Moderator
|
28. March 2006 @ 17:10 |
Link to this message
|
|
@ShdwStrdr
No biggie! Still showed some thingsthat may be fix the problem. The firmware update may do the trick - this will help your drive with read and write strategies on media esp. newer media. Yours is several versions behind.
Let us know how it turns out - good, bad or otherwise!
|
|
ShdwStrdr
Suspended due to non-functional email address
|
28. March 2006 @ 17:18 |
Link to this message
|
As for as the DMA Ive been in there before trying to enable it but with no luck. Is there a way to uninstall the Nvatabus. Am I right in thinking these were installed while installing the drivers for the MB.
Also I have never flashed the firmware before is there a guide to doing this. I know it can be dangerous thats why I have never tried it.
I have updated Nero just recently to 6.6.1.4. the latest version through the auto update.
ShadowStryder
|
Moderator
|
28. March 2006 @ 17:46 |
Link to this message
|
Not done right yeah the firmware flash can harm your drive - but it really pretty easy - takes 2 minutes maybe.
Download the file - make sure no other programs are running and no discs are in the drive. Keep the power on. Then open the .exe file - your drive should be listed - may have to click ok ,go,start. Now flash/run the .exe file - takes under a minute - then reboot and you should be good w/ the update.
For the drivers try the link above doing the uninstall and let windows reinstall w/ it's driver's - that may do it.
If you by chance use DVDShrink the version of Nero you have will no longer autoburn w/ Shrink. So if you use that you may want to go back to 6.6.0.18.
|
|
ShdwStrdr
Suspended due to non-functional email address
|
28. March 2006 @ 17:56 |
Link to this message
|
Hey Blinkie7 Just ran Nero Info Tool and it states that the DMA on all channels is on. I tried to enable about a week ago I guess I was successfull.
But I have a new issue since updating Nero to 6.6.1.4 I can't even burn -Rs. I get a TRF error. Do I need to roll back the drivers?
Here is a copy of the most recent Logs.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.01 (978), size=22528 bytes, created 7/18/1996 2:26:30 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 1, 4d
Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.10 - HA 1 TA 5 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00GVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
ASUS DVD-E616P D: CDRom3
PIONEER DVD-RW DVR-107D E: CDRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 610MB (625592kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.3.2006
NeroAPI
9:47:36 PM #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started
9:47:36 PM #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)
9:47:36 PM #3 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
9:47:36 PM #4 NEROAPI 7 File Burncd.cpp, Line 3095
Error:\nCannot connect TRF.
9:47:36 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
9:47:36 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.01 (978), size=14528 bytes, created 7/12/1996 7:31:10 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
ShadowStryder
|
|
ShdwStrdr
Suspended due to non-functional email address
|
28. March 2006 @ 18:00 |
Link to this message
|
|
Just replied then seen your most recent post. Definitely use shrink.
Will roll back driver. You don't have a link to the 6.6.0.18 by chance.
The one you gave earlier was to the firmware. Also tried to flash firmware and recieved message saying "available target not found."
ShadowStryder
This message has been edited since posting. Last time this message was edited on 28. March 2006 @ 18:20
|
Moderator
|
28. March 2006 @ 18:18 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 28. March 2006 @ 18:19
|
|
ShdwStrdr
Suspended due to non-functional email address
|
28. March 2006 @ 18:38 |
Link to this message
|
|
Blinkie7
Don't know if you caught my earlier post about the firmware, but I downloaded it and installed it but it came up with a message stating
that the Available target was not found.
Any Ideas why.
ShadowStryder
|
Moderator
|
28. March 2006 @ 18:45 |
Link to this message
|
|
@ShdwStrdr
Didn't catch that! Try the Pioneer link in my last post - look for the dvd107d - down about middle of page. Pick the 1.22 version next to it. That's one good thing w/ most firmware - if it doesn't see the right drive it won't install it - lessen the error factor!
This message has been edited since posting. Last time this message was edited on 28. March 2006 @ 18:47
|
|
ShdwStrdr
Suspended due to non-functional email address
|
28. March 2006 @ 18:52 |
Link to this message
|
|
Tried the one there also for model 107D. Same thing. They have another one there for the AO7 but every trace in Device Manager and in the Nero tool say this is model 107D.
Confused? Cause I am.
Just thought I would let you know I just burned a +R without updating the firmware.
But would still like to update it if you have any ideas.
Will check back tomorrow.
Thanx Alot
ShadowStryder
This message has been edited since posting. Last time this message was edited on 28. March 2006 @ 18:59
|
Moderator
|
28. March 2006 @ 18:58 |
Link to this message
|
@ShdwStrdr
Just a bit :) But I have a Pioneer drive also - A08 - and I run into the same thing - listed as 108 in Nero & Decrypter but it's the A08 instead.
So try the other one - it will let you know if it's not the right one and won't flash the drive.
|
|
ShdwStrdr
Suspended due to non-functional email address
|
29. March 2006 @ 13:46 |
Link to this message
|
|
Blinkie7
Tried the recommended firmware updates for my Pioneer 107D
and neither one would install, both giving the same message.
Available target not found.
Gonna try Pioneer support to see if they have any ideas.
If you come up with something let me know.
Thanx
ShadowStryder
|
Moderator
|
29. March 2006 @ 13:57 |
Link to this message
|
|
@ShdwStrdr
Is Pioneer the oem? (orig equip manufacturer) Is this a Sony Vaio pc?
|
AfterDawn Addict
|
29. March 2006 @ 13:59 |
Link to this message
|
|
|
ShdwStrdr
Suspended due to non-functional email address
|
29. March 2006 @ 14:06 |
Link to this message
|
|
Yes, It is a an OEM.
I built the system my self With all new components.
Gwendolin, Have already tried the most recent firmware updates,
thanks anyway.
Here is a list of my basic components:
Windows XP Professional Service Pack 2 (build 2600)
AMD 3000+ Barton Series running at 2.2 Ghz 420FSB
Kingston Hyper X 3200 mem 2x512 8 3 3 2
Radeon 850XT graphics 256 MB
ASUS A7N8X-Deluxe BIOS 1012
WDC WD1600JB-00GVA0 [Hard drive] (160.04 GB)
ASUS DVD-E616P [CD-ROM drive]
PIONEER DVD-RW DVR-107D [CD-ROM drive]
ShadowStryder
This message has been edited since posting. Last time this message was edited on 29. March 2006 @ 14:24
|
Moderator
|
29. March 2006 @ 14:30 |
Link to this message
|
|
@ShdwStrdr
You can give the A07XL 1.22 a shot. No where in any progs or device mgr. is my drive listed as an A08XL yet that is the only firmware it will take.
If that doesn't work well there's always Pioneer support.
Another thing I would do is upgrade the discs your using to Taiyo Yuden or Verbatim.
Keep us posted!
Edit almost forgot - try disconnecting the ASUS drive and then retry the the firmware. It may only be seeing that drive.
This message has been edited since posting. Last time this message was edited on 29. March 2006 @ 14:33
|
|
ShdwStrdr
Suspended due to non-functional email address
|
29. March 2006 @ 14:39 |
Link to this message
|
|
Blinkie will try the other firmware version.
always have used Verbatim, lately been using the JVC's without any problems. -R
The brand in device, I believe it RiteW is the +R my son bought from
the game store he works at. He wanted me to backup a bunch of anime
that he has and that is what he brought home.
That is how all this started with the plus's.
Ive got all that up and running now it has migrated over to the firmware issue.
Appreciate all the help, will keep you posted.
ShadowStryder
|
Moderator
|
29. March 2006 @ 14:56 |
Link to this message
|
@ShdwStrdr
Those discs you're using are made by Ritek - (from your log)
Quote:
Disc Manufacturer: RITEKW - 01
Ritek is okay - some members here love it others don't. I'm not a fan - stopped using it awhile ago (burn & playback issues)
Try disconnecting the ASUS drive to update the firmware- also everything is on the same channel - may be the problem with the firmware not recognizing the drive. You may want to put the drives on a separate channel from the hard drive.
|
|
ShdwStrdr
Suspended due to non-functional email address
|
29. March 2006 @ 15:35 |
Link to this message
|
|
Blinkie7
Firmware success DVR-AO7XL. Thanks Again
ShadowStryder
ShadowStryder
This message has been edited since posting. Last time this message was edited on 29. March 2006 @ 16:07
|
|
Advertisement
|
|
|
Moderator
|
29. March 2006 @ 16:31 |
Link to this message
|
|
@ShdwStrdr
Finally success :0) - It's usually much easy this than this!!
Hopefully that will do the trick with those Riteks.
I know how kids are - even older ones- with their anime (well mine at least!)
|
