|
For some strange reason, overnight, my Lite-on SOSW-852s has stopped burning DVDs. I'm trying with the exact same media as before (although its a new batch). I'm using DATASAFE DVD-R's, which i've used hundreds of times before. I've reinstalled my firmware to PSX3 and tried three other media types but to no avail. I've tried three different burners also (Nero 6.3.0.2, dvd decyrpter and sonic).
the error message shown in nero is 'unspecified target error'.
I've crawled through many forums but haven't found anything to help. I know it cant be the media, because i've used it before. I just bought some RIVISION DVD-R's and some DATAWRITE's and they dont burn either... again with the same error messg.
I think the problem is with reading the disks, however i don't know how this could have occured overnight.
hopefully there will be an obvious (for someone else) solution that i'm simply overlooking.
Any help at all would be soooo appriciated.
Here's a copy of my burn log, if that helps..
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
Nero version: 6.3.0.2 (Nero Express)
Recorder: <Slimtype DVDRW SOSW-852S>Version: PSX3 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.0.2
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : ST950212A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S D: CDRom0
Generic DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 223MB (228848kB)
Free physical memory: 59MB (61408kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.4.2006
Burn DVD Image
17:13:45 #1 Text 0 File Reader.cpp, Line 118
Reader running
17:13:45 #2 Text 0 File Writer.cpp, Line 124
Writer Slimtype DVDRW SOSW-852S running
17:13:45 #3 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media
17:13:46 #4 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2285519 (507:53.44, 4463MB)
17:13:46 #5 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
17:13:46 #6 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
17:13:46 #7 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:13:46 #8 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285520 (2285520) = #2285520/507:53.45
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285520 blocks [Slimtype DVDRW SOSW-852S ]
--------------------------------------------------------------
17:13:46 #9 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [Slimtype DVDRW SOSW-852S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4680744960, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285520 | lead-out | 1 | 0x00 | 0x41
17:13:46 #10 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started
17:13:47 #11 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
17:13:47 #12 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed
17:13:47 #13 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 2x (2,760 KB/s)
17:13:47 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
17:13:47 #15 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:10,059 (850059ms) -> OK
17:13:47 #16 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode
17:13:47 #17 Text 0 File Mmc.cpp, Line 19451
Set BUFE: SMART-BURN -> ON , Generic write control : ON
17:13:47 #18 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes
17:13:47 #19 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:13:48 #20 SCSI -400 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04DC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
17:13:48 #21 CDR -400 File Writer.cpp, Line 301
Unspecified target error
17:13:48 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
17:13:48 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
17:13:49 #24 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was -1
17:13:49 #25 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
17:13:49 #26 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
17:13:49 #27 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 2x (2,760 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.19E, size=20576 bytes, created 21/10/2004 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 17:31:48 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
"Hell have no fury like a woman scorned for sega"
Mallrats.
|
Hi.
Quote:
Nero version: 6.3.0.2 (Nero Express)
The best version of Nero is without a doubt the 6.6.0.18... Not the latest but the most stable at this point in time. Here's the link for the upgrade:
http://httpdl2.usw.nero.com/Nero-6.6.0.18.exeQuote:
Physical memory : 223MB (228848kB)
Free physical memory: 59MB (61408kB)
I would consider an upgrade on your RAM very quickly if you want to get into the hobby... I normally recommend a minimum of 512Mb... I have 1024Mb and i'm considering another upgrade...
Quote:
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
Are those TDK made? They do burn good and even work... But... You do want to be able to watch the film next year don't you? There's a lot more reliable brands out there for not much more(if any!)money than those Datasafe's... Verbatims, Taiyo Yuden or Maxell (made in Japland) are the best choice without a doubt... Just my opinion...
Quote:
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
What we have here is that the burner can't recognize the disc... Don't know if the reason is because the firmware is out of date (can't check as the firmware page is down) or the discs are too new...
You should have something like this:
Quote:
Media Specific [16..63]:
00 00 00 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
Hence the error that followed that part of your log...
Quote:
17:13:48 #20 SCSI -400 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04DC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00 17:13:48 #21 CDR -400 File Writer.cpp, Line 301
Unspecified target error
17:13:48 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
17:13:48 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
17:13:49 #24 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was -1
17:13:49 #25 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
17:13:49 #26 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
Quote:
17:13:49 #27 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 2x (2,760 KB/s)
Burning too slow can create problems as well you know... I would recommend burning at 4x really...
Like nasayin pointed out, the main cause for the burning problem has got to be the memory limitations...
Any questions, feel free to post them. ;)
This message has been edited since posting. Last time this message was edited on 6. April 2006 @ 11:00
|
