|
|
|
burner is burning a blank space 1/4 of the way through
|
|
|
elawley23
Junior Member
|
6. May 2006 @ 11:46 |
Link to this message
|
|
my burner is burning a blank space 1/4 of the way through the disk, I have used anydvd, clonedvd, dvdfab,dvdshrink, dvd decripter, and it does it with all movies. I have been burning for 3 years and never ran into this problem, the movie burns fine, no errors,but you can only watch 30 mins of the mivie and it freezes. When you look at the disk there is a dark grey line burned in the disk, and it is in the same place on all of my disks now, it started about 2 weeks ago, has anyone ran into this problem, my burner is a lacie D2
Lsu
|
|
Advertisement
|
|
|
|
Moderator
1 product review
|
6. May 2006 @ 11:57 |
Link to this message
|
Did you happen to purchase new discs 2 weeks ago too? Is your firmware current? Can you post a burn log from Nero?
|
|
elawley23
Junior Member
|
6. May 2006 @ 12:15 |
Link to this message
|
|
No i have been using the same sony disks I allways have used, and the firmware is current, The only time I see the error log is when i get an error, where would I find a log to show you
Lsu
|
Moderator
1 product review
|
6. May 2006 @ 12:18 |
Link to this message
|
|
|
elawley23
Junior Member
|
6. May 2006 @ 12:22 |
Link to this message
|
here it is thankyou,
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 1:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.06 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380013A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: On
CdRomPeripheral : E-IDE CD-ROM 45X atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 400c D: CDRom0
E-IDE CD-ROM 45X E: CDRom1
_NEC DVD_RW ND-3500AG G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 302MB (310000kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.4.2006
NeroAPI
3:41:39 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
3:41:39 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
3:41:39 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
3:41:39 PM #4 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AFD6C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
3:41:39 PM #5 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AFD6C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
3:41:39 PM #6 Text 0 File Reader.cpp, Line 127
Reader running
3:41:39 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:41:39 PM #8 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3500AG running
3:41:39 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:41:39 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:41:39 PM #11 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
3:41:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
3:41:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
3:41:39 PM #14 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+R
3:41:39 PM #15 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:41:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-3500AG]
--------------------------------------------------------------
3:41:39 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
3:41:39 PM #18 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
3:41:39 PM #19 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
3:41:39 PM #20 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
3:41:39 PM #21 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
3:41:39 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:41:39 PM #23 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0CDC0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
3:41:39 PM #24 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AFD6C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
3:41:39 PM #25 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AFD6C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
3:41:39 PM #26 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
3:51:58 PM #27 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
3:51:59 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:52:26 PM #29 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AFD6C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
3:52:26 PM #30 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AFD6C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
3:52:26 PM #31 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
3:52:27 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
3:52:27 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 1:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 4:02:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Lsu
|
|
elawley23
Junior Member
|
6. May 2006 @ 12:41 |
Link to this message
|
|
do you see anything that could be wrong in the log
Lsu
|
|
Advertisement
|
|
|
Moderator
3 product reviews
|
6. May 2006 @ 12:52 |
Link to this message
|
|
closing thread as you've asked this on another forum , no double posts [see Forum Rules] !!
|
|
