|
I've been having all kinds of problems converting an XVid file to either m2v or mpg. I really just want to convet it so that I can burn it to DVD and keep the 16x9 aspect ratio. Right at the moment if I simply use a DVD authoring program (I've tried Roxio DVD Builder, Ulead Movie Factory 3, and Sonic DVDit!) the picture will be squeezed to 4:3.
I used TMPGEnc with 2 pass VBR, but when it came to the second pass the program would quit because of an error (something about the checksum didn't match up with the first pass). So I tried Manual VBR and it worked, except that my file went from 42min and 22sec to 2hrs 5min and 37sec. After the 42min and 22sec mark it just goes to black.
Does anyone know why TMPGEnc might be freezing up with 2 pass VBR or why it's adding all that black with manual VBR?
Thanks
File info from G-Spot:
Duration 42min 22sec
XVid
Aspect Ratio: 608x336 (1.81:1)
Bitrate: 1014 kb/s
fps: 23.976
Qf: 0.207 bits/pixel
Settings in TMPGEnc:
Stream Type: MPEG-2 Video
Size: 720x480 pixels
Aspect Ratio: 16x9 Display
Frame Rate: 23.976 fps
Rate Control Mode: Manual VBR (MVBR)
Maximum Bitrate: 9000, Minimum: 5,000
Enable padding not to be lower than minimum bitrate (checked)
P picture spoilage: 0
B picture spoilage: 20
Profile & Level: Main Profile & Main Level (MP@ML)
Video Format: NTSC
Encode Mode: Non-Interlaced
YUV Format: 4:2:0
DC Component Precision: 10 bits
Motion Search Precision: Highest Quality (Very Slow)
Advanced
Video Source Type: Non-Interlace (Progressive)
Field Order: Bottom Field First (field B)
Source Aspect Ratio: 16:9 525 line (NTSC)
Video Arrange Method: Full Screen (keep aspect ratio)
(Nothing Checked Below)
Win XP Pro
Athlon 64 FX-53 (939 pin)
Asus A8V Deluxe Motherboard
2GB Dual Channel Corsair XMS Xtra-low Latency PC3200
2 160GB Maxtor 7200 HDD 8Mb Cache in RAID 1
300GB Maxtor 7200 HDD 2Mb Cache
NVidia GeForce 6800 Ultra 256MB Video
SoundBlaster 5.1 Audio
Plextor 716A and 708A DVD Burners
|
