|
|
|
Nero "illegal disk" updated firmware and nero already
|
|
|
Makowb
Newbie
|
23. May 2006 @ 15:26 |
Link to this message
|
|
Btw, I also checked out the DMA thing, it says it's off because I have the nForce chipset and it uses "ultra DMA" which I'm using on all my drives. I used to be able to burn dvds and CDs all the time then I couldn't burn CD-RWs then DVDs. I updated to Nero 7 and I can use CD-RWs, but still not the DVDs. Granted these are a new version of the media (TDK DVD-R 1-16x) but my drive is TDK, you think they'd work together...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 5 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 3 - 7.2.0.3
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120L0 nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : TDK DVDRW0404N nvatabus Port 1 ID 2 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 nvatabus Port 1 ID 3 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
TDK DVDRW0404N D: CDRom5
TOSHIBA DVD-ROM SD-M1612 E: CDRom1
AXV CD/DVD-ROM F: CDRom2
NERO IMAGEDRIVE2 G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 533MB (546668kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.5.2006
Burn DVD Image
4:11:16 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
4:11:16 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
4:11:16 PM #3 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media
4:11:16 PM #4 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286039 (508:00.39, 4464MB)
4:11:16 PM #5 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
4:11:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
4:11:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:11:16 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286040 (2286040) = #2286040/508:0.40
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286040 blocks [D: TDK DVDRW0404N]
--------------------------------------------------------------
4:11:16 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TDK DVDRW0404N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681809920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286040 | lead-out | 1 | 0x41 | 0x00
4:11:16 PM #10 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:11:16 PM #11 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:11:16 PM #12 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
4:11:16 PM #13 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.
4:11:16 PM #14 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
4:11:16 PM #15 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
4:11:16 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
4:11:16 PM #17 Text 0 File DVDR.cpp, Line 2786
Recording mode: Sequential Recording Mode for Multisession
4:11:16 PM #18 Text 0 File DVDR.cpp, Line 2942
Start write address at LBA 0
DVD high compatibility mode: Yes
4:11:16 PM #19 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:11:16 PM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 290
D: CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 22 E1 E0 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
4:11:16 PM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
D: TDK DVDRW0404N
4:11:16 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
4:11:16 PM #23 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 3:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:41 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 23. May 2006 @ 15:50
|
|
Advertisement
|
|
|
|
Moderator
|
23. May 2006 @ 15:46 |
Link to this message
|
|
Hi Makowb
Welcome to aD!
Your TDK drive is actually a NEC-1300A. Older drive - max burn of 4x. So even with the latest firmware your drive may not handle some of the newer 16x discs. Looks like the last update for this drive was 9/2004.
So try switching the media to Verbatim or Made in Japan Sony, Fuji or Maxell. Look for 8x - your drive should handle this better.
It may also be time to upgrade this drive to a newer 16x one.
Oh and edit out the serial in your post - begins w/ 1C82. Don't need someone else using it!
|
|
Makowb
Newbie
|
23. May 2006 @ 15:51 |
Link to this message
|
|
Don't exactly have the money for a new burner, but these DVDs are basically useless because there's no support for my drive? Lame...I don't have the money to go out and buy a lot of DVDs let alone drives ><. Oh well, thanks for the help.
|
AfterDawn Addict
|
23. May 2006 @ 15:59 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 23. May 2006 @ 16:00
|
Moderator
|
23. May 2006 @ 16:06 |
Link to this message
|
Well they may be hit or miss since the drive hasn't had any recent updates.
Here's a few more suggestions that may or may not help:
°Try cleaning the lens of the drive w/ a lens cleaner.
°Check your connections to the drive - make sure connected securely.
°Defrag if you haven't recently.
°Try the downgrade of Nero suggested by Gwen
°Try burning w/ another app - try CloneDVD (21 day free trial). I think it uses it's own aspi. Nero is using XP's.
Did anything else change between the time you were able to burn to when it wouldn't burn anything?
New drives aren't that bad now a days - good ones under $50(us). May be something to save for :)
|
|
Makowb
Newbie
|
24. May 2006 @ 22:33 |
Link to this message
|
Changed Nero versions, didn't work, defragged, tryed clone dvd, cleaned lens, and checked connections...i just think my TDK drive doesn't want to read TDK dvds...
|
AfterDawn Addict
|
24. May 2006 @ 23:31 |
Link to this message
|
A word of advice, stick to Nero 7.0.8.2...you will NOT regret it.
Heres something I read about nForce drivers, hope it helps
Quote:
Install actual mainboard driver (Busmaster/ Chipset driver). Contact in this case manufacturer of your mainboard. For test you can also try to burn without DMA mode, ( only possible under Windows XP and Windows 2000 ) in the device manager - "IDE ATA/ ATAPI controllers", you can switch from DMA to PIO mode. Pls. notice: If problems caused by NFORCE Chipset drivers, you should better reinstall MS standard IDE drivers.
More than one installed burnersoftwares can cause problems (**some softwares replace ASPI driver by their own! ) so install only one, especially actual trial release of NERO [ http://www.nero.com ] and check burn project again.
**If needed, install actual ASPI Driver (contact manufacturer of your burnersoftware e.g. www.nero.com )
Use our recommended medias , with other medias there`s no guarantee, they will be written correctly and with maximum speed.
For Problems with InCD, pls. contact Nero support. Be informed device works only with InCD, Mt.Rainier (e.g. directCD) is not supported.
You can deactivate for test (only with Windows XP) "IMAPI CD-Burning COM Service", go to menu "start" > "settings" > "administration" > "services", search "IMAPI CD-Burning COM Service", rightclick and deactivate "starttyp".
This message has been edited since posting. Last time this message was edited on 24. May 2006 @ 23:35
|
Moderator
|
25. May 2006 @ 06:09 |
Link to this message
|
|
@Makowb
You're probably right - you've ruled out a bunch of other possibilites.
My guess is the burning failures started w/ the 16x speed dvd media.
For the older drives that haven't received any recent support - they don't handle the newer dvd media well at all.
See if a friend has some 8x or lower rated media you can try.
Don't know where you located but Besy Buy, Staple etc usually have weekly sales on the good stuff - 50 for 14.99. There are also some online sites where you can still get 4x media.
|
|
Makowb
Newbie
|
27. May 2006 @ 20:42 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 27. May 2006 @ 20:44
|
Moderator
|
27. May 2006 @ 20:58 |
Link to this message
|
Definitely good stuff :)
Taiyo is what I mainly use.
The made in Japan brands from post above are usually made by Taiyo.
If you don't have a printer that will print to dvd's then just get the non printable ones.
Here's another one for you:
http://www.supermediastore.com/taiyo-yuden-4x-dvd-r-100.html
Sony's good too - has been to me - I've used the ones manufactured by Sony themselves and made by Taiyo.
This message has been edited since posting. Last time this message was edited on 27. May 2006 @ 20:58
|
|
rell22
Newbie
|
19. July 2006 @ 14:48 |
Link to this message
|
|
I have the same error "illegal Disk". I have updated my firmware and my DMA is on. I am using Princo 4X. I have successfully been using then for a long time. Please Help.
Thanks - I'm a Newbie!
|
AfterDawn Addict
|
19. July 2006 @ 14:56 |
Link to this message
|
@rell22, Welcome to AD. It's not a good idea to pin your post onto another as it may get overlooked, it is always suggested you start one of your own. So we can see whats happening can you post a Nero log, located here
Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.tx
The logs gives us a lot of info we need to locate your problem.
|
|
rell22
Newbie
|
19. July 2006 @ 14:58 |
Link to this message
|
I'm sorry . I forgot to post the log. here it is:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 8:06:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L200R0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (457904kB)
Free physical memory: 61MB (62844kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.7.2006
UDF/ISO compilation
6:26:39 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
6:26:39 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
6:26:39 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:26:39 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
6:26:39 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 64512KB of Memory
6:26:39 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
6:26:39 PM #7 Text 0 File Writer.cpp, Line 113
Writer D: LITE-ON DVDRW SOHW-1693S running
6:26:39 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:26:39 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:26:39 PM #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
6:26:39 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 696911 (154:52.11, 1361MB)
6:26:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
6:26:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193
6:26:39 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:26:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 696912 (696912) = #696912/154:52.12
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 696912 blocks [D: LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
6:26:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1427275776, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
696912 | lead-out | 1 | 0x41 | 0x00
6:26:39 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:26:39 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
6:26:39 PM #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
6:26:39 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
6:26:39 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
6:26:39 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:26:40 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
6:26:40 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
6:26:40 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
6:26:40 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:27:17 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
18:27:17.625 - D: LITE-ON DVDRW SOHW-1693S : Queue again later
6:31:01 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 05 A0 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x09a70000: Len x10000
0x00 00 01 BA 44 00 7D CF FC 2B 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 92 83 2B 66 23 25 B0 F3 95
0x22 58 19 50 0B 18 DA 5F 41 F0 F1 80 5B 6B 24 49
6:31:01 PM #29 CDR -1046 File Writer.cpp, Line 302
Illegal disc
D: LITE-ON DVDRW SOHW-1693S
6:31:01 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:31:02 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:31:02 PM #32 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1439
6:31:02 PM #33 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 8:06:00 AM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 7/3/2006 7:17:57 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
19. July 2006 @ 15:24 |
Link to this message
|
Quote:
Nero Version: 7.0.1.2
Update your Nero to this stable version, 7.0.8.2, anything past that is buggy http://www.filehippo.com/download_nero_7_premium/?845
Quote:
Physical memory : 447MB (457904kB)
Free physical memory: 61MB (62844kB)
Memory in use : 86 %
Try and free up some memory,dont multitask while burning
Quote:
Disc Manufacturer: PRINCO
I read that you have used these discs for a while but they are NOT good quality, try Verbatim or Sony (made in japan)
Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Your burner doesnt like the discs
|
|
Advertisement
|
|
|
|
rell22
Newbie
|
19. July 2006 @ 15:29 |
Link to this message
|
|
I do that now.
Thank you for the help and you patience.
|
|
