|
|
|
Nero Burning ROM - Burn Process Failed
|
|
|
z10
Newbie
|
24. May 2006 @ 06:27 |
Link to this message
|
|
Hi all,
I've been using Nero 7 for a while now without any problem. However, lately I'm having trouble burning data CDs. When I burn a CD or DVD data disk, it stops 1:00 into the burn process.
I've searched the forum for solutions to my problem. I've checked DMA, disabled the CD recording, closed programs, burnt at much less than half capacity. I've wasted about 20 blanks discs already, so any ideas or help is very much appreciated.
Attached is the log, I'll be happy to provide any other requested information.
Thanks for your time.
xxxxxxxxxxxxxxxxxxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 167MB (171360kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.5.2006
UDF compilation
12:08:46 AM #1 Text 0 File Isodoc.cpp, Line 6424
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
12:08:46 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
12:08:46 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
12:08:46 AM #4 Text 0 File Writer.cpp, Line 113
Writer D: PIONEER DVD-RW DVR-106D running
12:08:46 AM #5 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media
12:08:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2214287 (492:03.62, 4324MB)
12:08:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
12:08:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
12:08:47 AM #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:08:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2214288 (2214288) = #2214288/492:3.63
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2214288 blocks [D: PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------
12:08:47 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4534861824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2214288 | lead-out | 1 | 0x41 | 0x00
12:08:47 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:08:47 AM #13 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:08:47 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
12:08:47 AM #15 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.
12:08:47 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
12:08:47 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
12:08:47 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:08:47 AM #19 Text 0 File DVDR.cpp, Line 2786
Recording mode: Sequential Recording Mode for Multisession
12:08:47 AM #20 Text 0 File DVDR.cpp, Line 2942
Start write address at LBA 0
DVD high compatibility mode: Yes
12:08:47 AM #21 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:09:33 AM #22 Text 0 File Cdrdrv.cpp, Line 1214
00:09:33.106 - D: PIONEER DVD-RW DVR-106D : Queue again later
12:09:52 AM #23 Text 0 File Cdrdrv.cpp, Line 1214
00:09:52.809 - D: PIONEER DVD-RW DVR-106D : Queue again later
12:09:54 AM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 09 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 05 F0 0E 00 00 00 00 0C
Buffer x05480000: Len x10000
0x52 5A 5E 9E 28 5D F6 EB E7 8F A3 BC 70 C6 DF 75
0x75 D5 53 7F 82 B5 84 F8 44 3A 1D 03 94 A7 6F 12
0xB4 E1 D4 44 A3 03 23 43 C8 CA 99 1A 11 35 3B 11
12:09:54 AM #25 CDR -1135 File Writer.cpp, Line 302
Write error
D: PIONEER DVD-RW DVR-106D
12:09:54 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:09:54 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:09:54 AM #28 Text 0 File DVDR.cpp, Line 3182
EndDAO: Last written address was 2303
12:10:20 AM #29 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out
12:10:20 AM #30 SPTI -1047 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 64
12:10:20 AM #31 SPTI -1176 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04
12:10:20 AM #32 CDR -1047 File WriterStatus.cpp, Line 167
Illegal mode for this track
D: PIONEER DVD-RW DVR-106D
12:10:20 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
12:10:20 AM #34 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 5/04/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 5, size=29568 bytes, created 5/04/2006 11:34:22 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 5, size=8832 bytes, created 5/04/2006 11:34:56 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 24. May 2006 @ 15:13
|
|
Advertisement
|
 |
|
|
|
julvy
Newbie
|
24. May 2006 @ 08:56 |
Link to this message
|
Hi Z10!!!
Curiously I Have the same Nero (version 7), the same burner (Pioneer)and the same problem. When I instaled the program his function was good but after a while it begging to present error messages. BURN PROCESS FAILED AT 16X. As you can imagine I wasted severals CDs. Are you found any solution? Please, I appreciate your help. Since you have the same program and the same burner as I'm, I think that we can communicate. Thank,Julio
|
|
z10
Newbie
|
24. May 2006 @ 09:21 |
Link to this message
|
|
Julvy, I haven't found a fix yet unfortunately.
I'm cleaning up my hard-drive and will try again later. I'll keep you posted.
This message has been edited since posting. Last time this message was edited on 24. May 2006 @ 09:22
|
Senior Member
|
24. May 2006 @ 09:48 |
Link to this message
|
Hi,
Quote:
1C83-7XXX-10E5-477X-4022-XXXX-XXXX
edit out your serial number at the top of your log before someone pirates it.
Quote:
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 7.2.0.3
your firmware presently is not up to date click http://www.pioneerelectronics.com/pna/article/0,,2076_4273_128163... use DVR-A06/106 and update to version 1.08
Quote:
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: Off
Your burner is in pio mode and needs to be in dma use this link as it has visual steps.
http://www.burstcopy.com/dma/xp/
Quote:
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
You will have to remove your current version of nero using nero cleantool http://ww2.nero.com/nero7/enu/InCD_CleanTool.html. Remember to include all remnants of nero using the tool, reboot and install the following:
Nero 7.0.2.3 is said to have some bugs goto http://www.filehippo.com/download_nero_7_premium/ and download to the right version 7.0.8.2 which is the last known bug-free version of nero 7.
Quote:
File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 5/04/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 5, size=29568 bytes, created 5/04/2006 11:34:22 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 5, size=8832 bytes, created 5/04/2006 11:34:56 AM (InCD4 driver for win NT/2K/XP)
This is nero incd packet writing software and doesn't play well with some systems also remove using nero cleantool and don't re-install when you load 7.0.8.2.
Quote:
Physical memory : 511MB (523764kB)
Free physical memory: 167MB (171360kB)
Memory in use : 67 %
Try turning some of your processes off as you using too much ram while trying to burn
anything I missed there are many members here willing to assist you in correcting your issues so you can get up and burning.
@juvly
Quote:
BURN PROCESS FAILED AT 16X. As you can imagine I wasted severals CDs. Are you found any solution? Please, I appreciate your help. Since you have the same program and the same burner as I'm, I think
See my comments above on the version of nero the original post referenced. Are you trying to burn cds or dvds? If you are burning dvds then slow your burn speed down to 4x.
This message has been edited since posting. Last time this message was edited on 24. May 2006 @ 09:50
|
|
z10
Newbie
|
24. May 2006 @ 15:13 |
Link to this message
|
|
Matt,
I'm at work atm so I will try your suggestions when I get home.
Thanks.
This message has been edited since posting. Last time this message was edited on 24. May 2006 @ 15:14
|
|
z10
Newbie
|
25. May 2006 @ 03:32 |
Link to this message
|
|
Matt,
I followed all your instructions. However it still stops 1:00 into the burn process (I think for a different reason). I've been fiddling around with the settings for the past two hours, checking and re-checking everything. I've checked DMA is turned off (The system settings says it's turned off, but the log says otherwise).
I chose not to install InCd, but it appears at the end of the log. I've also turned off as many system processes as possible (including explorer). I've wasted another 3 dvds in the process.
Here's the log. Again, your help is very much appreciated.
4C82-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 250MB (256820kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.5.2006
ISO compilation
9:18:08 PM #1 Text 0 File Isodoc.cpp, Line 6423
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:18:09 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
9:18:09 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
9:18:09 PM #4 Text 0 File Writer.cpp, Line 113
Writer D: PIONEER DVD-RW DVR-106D running
9:18:09 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:18:09 PM #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
9:18:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2199103 (488:41.28, 4295MB)
9:18:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
9:18:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
9:18:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:18:10 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2199104 (2199104) = #2199104/488:41.29
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199104 blocks [D: PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------
9:18:10 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4503764992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2199104 | lead-out | 1 | 0x41 | 0x00
9:18:10 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:18:10 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:18:10 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
9:18:10 PM #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
9:18:10 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
9:18:10 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
9:18:10 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:18:10 PM #20 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode for Multisession
9:18:10 PM #21 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
9:18:10 PM #22 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:18:24 PM #23 Text 0 File Cdrdrv.cpp, Line 1211
21:18:24.327 - D: PIONEER DVD-RW DVR-106D : Queue again later
9:19:28 PM #24 SPTI -1061 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 0E 00 00 00 00 44
Buffer x05e70000: Len x10000
0xFF FB 92 00 E9 8C E3 04 23 D0 1B 38 5A 50 61 04
0x9A 03 67 08 4A 0B F0 A7 40 6C 60 E9 81 7A 90 A7
0xCD AC 3D 29 1F 32 65 E9 95 81 21 61 8B 55 B2 E9
9:19:28 PM #25 CDR -1061 File Writer.cpp, Line 302
Internal target failure
D: PIONEER DVD-RW DVR-106D
9:19:28 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:19:28 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:19:28 PM #28 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 767
9:19:28 PM #29 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out
9:19:28 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04
9:19:28 PM #31 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
D: PIONEER DVD-RW DVR-106D
9:19:28 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
9:19:28 PM #33 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 5/04/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 25. May 2006 @ 03:50
|
Senior Member
|
25. May 2006 @ 05:52 |
Link to this message
|
Hi,
Quote:
File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 5/04/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP)
You installed incd or did not clear it via the cleantool before as the driver is still present in your log after you updated. Once again use the nero cleantool to uninstall only incd.
Quote:
PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: Off
Refer to the previous link I posted in reference to turning on your dma or http://home.comcast.net/~bbmayo/FAQ.htm and click the link under the FAQ question why is my drive running so slow now.
By chance how old is this drive as per your log here Quote:
Bus Type : default (0) -> ATAPI, detected: ?
Some other application is trying to access your burner while buring and this may be due to conflicting drivers from incd (refer to previous comments)/ Also winxp comes with its own cd writing software..though rare make sure you have auto play/ write disabled on your pioneer burner
and Quote:
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
there is problems with nero recognizing your burner or incd is the varmint.
I would suggest uninstalling nero again via the cleantool ensuring that at the bottom right you mark the check all box...reboot as it tells you when the cleaning is done and reinstall nero 6.6.0.18 (do this after you try to fix your dma issue first).
I would get some blank dvdrw as not to waste dvds until your burn problems are solved.
Forgot to ask what brand of media are you using..mcc is usually top notch if verbatim. I would try a different brand of media (sony or fuji MIJ)or if available in your area taiyo yuden media. I am still leaning on the burner is the overall issue.
This message has been edited since posting. Last time this message was edited on 25. May 2006 @ 07:05
|
AfterDawn Addict
|
25. May 2006 @ 06:28 |
Link to this message
|
Quote:
Internal target failure
As Matt72 has directed get your DMA turned on for this drive, if you still have errors there is something going on with the drive, this is a hardware error. Check your cables and make sure the are seated correctly. Also, try another brand of media and see if this works out.
|
|
z10
Newbie
|
25. May 2006 @ 18:00 |
Link to this message
|
Matt, I've gone through your instructions.
I've unstalled and reinstalled Nero again, making sure to use InCd cleaner and relevant cleanup tools (Nero Cleaner, Registry Checker).
I've unstalled and reinstalled my IDE channels making sure DMA is turned on.
I've also checked cable and plug connections, and tried different media.
My CD burner is over 5 years old.
Any other suggestions?
Here's the log:
4C82-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 256MB (262432kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.5.2006
ISO compilation
11:46:06 AM #1 Text 0 File Isodoc.cpp, Line 6423
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:46:07 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
11:46:07 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
11:46:07 AM #4 Text 0 File Writer.cpp, Line 113
Writer D: PIONEER DVD-RW DVR-106D running
11:46:07 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:46:07 AM #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
11:46:08 AM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2209983 (491:06.33, 4316MB)
11:46:08 AM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
11:46:08 AM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
11:46:08 AM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:46:08 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2209984 (2209984) = #2209984/491:6.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2209984 blocks [D: PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------
11:46:08 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4526047232, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2209984 | lead-out | 1 | 0x41 | 0x00
11:46:08 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:46:08 AM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:46:08 AM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
11:46:08 AM #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
11:46:08 AM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
11:46:08 AM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
11:46:08 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:46:08 AM #20 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode for Multisession
11:46:08 AM #21 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
11:46:08 AM #22 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:46:22 AM #23 Text 0 File Cdrdrv.cpp, Line 1211
11:46:22.437 - D: PIONEER DVD-RW DVR-106D : Queue again later
11:47:15 AM #24 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x08 (KEY_BLANK_CHECK)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Area: 0xF1 00 08 FF FF 03 F0 0E 00 00 00 00 00
Buffer x05400000: Len x10000
0xB8 BB 0C F3 BC 39 4B 25 94 84 C2 B8 3C CD 5E E2
0x61 7C D5 69 79 9E 60 A4 E4 3D 44 6B F9 09 54 F2
0x11 16 72 1A 69 76 CA B6 A1 C1 DB E1 D3 71 31 01
11:47:15 AM #25 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
D: PIONEER DVD-RW DVR-106D
11:47:15 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:47:15 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:47:15 AM #28 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 767
11:47:15 AM #29 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out
11:47:15 AM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04
11:47:15 AM #31 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
D: PIONEER DVD-RW DVR-106D
11:47:15 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
11:47:15 AM #33 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
25. May 2006 @ 18:24 |
Link to this message
|
Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
For some reason your burner is not recognizing your media, you are using good media but I would try another brand such as Verbatim or Sony (made in japan) and see how it goes.
|
Moderator
|
25. May 2006 @ 19:54 |
Link to this message
|
|
Hi z10
What other different media did you try besides the MCC id?
You can also try a burn speed of 2x since 4x is the max for this drive.
Another thing is yep it's an old burner and you DMA is still showing off.
My guess is it could be because the drive is heading south or the cable is bad like arniebear suggested.
So try picking up a new ide cable - 80 wire. If you end up getting a new drive (may be time too) you should get a new one anyhow.
|
|
z10
Newbie
|
25. May 2006 @ 20:30 |
Link to this message
|
|
Thanks all!
I will try those suggestions this weekend.
|
Senior Member
|
26. May 2006 @ 16:48 |
Link to this message
|
Hi,
Was involved with work issues but here is what I see
Quote:
Unspecified Recorder Error
D: PIONEER DVD-RW DVR-106D
Seems there is an issue with the recorder. After trying different media as suggested and still burning errors I would consider checking online at newegg.com (use google to find it) and price a new burner.
Quote:
My CD burner is over 5 years old.
Again I suggest a new burner might be the way to go as they run about 59 dollars these days.
By the way I looked up your current burner and it writes at only 4x. If you switched media to 8x or 16x recently try to change back to 4x media. If not the case then see my recommendations above.
This message has been edited since posting. Last time this message was edited on 26. May 2006 @ 17:41
|
|
Advertisement
|
|
|
|
guyrus
Suspended due to non-functional email address
|
27. May 2006 @ 02:22 |
Link to this message
|
Quote:
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: Off
z10: i noticed all through the logs provided that your dma is still turned off,...............Is it not possible to turn it on due to the age of the burner
|
|
